655214
86
Zoom out
Zoom in
Previous page
1/95
Next page
86
The power cord or plug is damaged; liquid has entered the printer; the printer has been
dropped or the casing damaged; the printer does not operate normally or exhibits a distinct
change in performance.
Do not adjust controls that are not covered by the operating instructions.
When connecting the printer to a computer or other device with a cable, ensure the correct
orientation of the connectors. Each connector has only one correct orientation. Inserting a
connector in the wrong orientation may damage both devices connected by the cable.
If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are
fuses in the plug, make sure you replace them with fuses of the correct size and rating.
Place the printer on a flat, stable surface that extends beyond the base of the printer in all
directions. If you place the printer by the wall, leave more than 4 inches (10 cm) between the
back of the printer and the wall. The printer will not operate properly if it is tilted at an angle.
When storing or transporting the printer, do not tilt it, stand it on its side, or turn it upside
down. Otherwise, ink may leak.
Allow spaces behind the printer for the cables, and leave enough space in front of the printer
for the paper to be fully ejected.
Avoid places subject to rapid changes in temperature and humidity. Also, keep the printer
away from direct sunlight, strong light, or heat sources.
Do not place or store the printer outdoors, near excessive dirt or dust, water, heat sources, or in
locations subject to shocks, vibrations, high temperature or humidity. Do not use with wet
hands.
Place the printer near a wall outlet where the plug can be easily unplugged.
Do not insert objects through the slots in the printer.
Take care not to spill liquid on the printer.
Do not put your hand inside the printer during printing.
Do not touch the white flat cable and ink tubes inside the printer.
Do not use aerosol products that contain flammable gases inside or around this printer. Doing
so may cause fire.
Do not move the print head by hand; otherwise, you may damage the printer.
Always turn the printer off using the power button. When this button is pressed, the
power button light flashes. Do not unplug the printer or turn off the power at the outlet until
the power button light stops flashing.
Before transporting the printer, make sure that the print head is in the home (far right)
position.
Refill ink when the ink level is below the lower line on the ink tank. Continued use of the
printer when the ink level is below the lower line could damage the printer.
If you are not going to use the printer for a long period, be sure to unplug the power cord from
the electrical outlet.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson L800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson L800 in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson L800

Epson L800 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info