543611
42
Zoom out
Zoom in
Previous page
1/217
Next page
42 Setting Up the Projector
Connecting a Component Video Source
1. Look at the connectors at one end of your component video cable.
If they are bayonet (BNC) connectors, go on to step 2. If they are
RCA connectors, you’ll need to attach commercially available
BNC adapters to plug the cable into your projector, then
continue with step 2.
2. Connect the cable to your player and the BNC connectors on the
projector. Match the Y/Cb/Cr (or Y/Pb/Pr) connectors on your
player to the corresponding connectors on the projector.
3. You may need to change the
Input Signal setting in the
projector’s Signal menu to
Component (see page 118).
4. If you want to play sound through the projector, see page 46 for
instructions on connecting audio cables.
5. When you’ve finished making any connections, see page 51 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If the component video cable
was not provided with your
video device, you can
p
urchase one from an
electronics dealer.
note
Be sure your video player is
not an RGB video source.
If you select the wrong
source, image quality may
suffer. Check your video
p
layer’s documentation.
Also, make sure the Input
Signal setting in the Signal
menu is set to
Auto or
Component (see
p
age 118).
note
If you have a
component-to-VGA video
cable, you can use it to
connect a component video
source. Connect the VGA
connector to the projector’s
Computer1 or
Computer2 (G5550NL/
G5650WNL/G5950NL
only) port, then connect the
other end of the cable to your
p
layer.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson G5550NL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson G5550NL in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info