An Image of the Reverse Side of the Original Appears in the Copied
Image
❏ For a thin original, place the original on the scanner glass and then place a piece of black paper over it.
❏ Lower the copy density setting on the control panel.
Related Information
& “Menu Options for Copy” on page 54
The Position, Size, or Margins of the Printout Are Incorrect
❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
❏ When placing the originals on the scanner glass, align the corner of the original with the corner indicated by a
symbol on the frame of the scanner glass. If the edges of the copy are cropped o, move the original slightly
away from the corner.
❏ When placing the originals on the scanner glass, clean the scanner glass and the document cover. If there is dust
or stains on the glass, the copy area may extend to include the dust or stains, resulting in the wrong copying
position or small images.
❏ Select the appropriate paper size setting.
❏ Adjust the margin setting in the application so that it falls within the printable area.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 19
& “Placing Originals on the Scanner Glass” on page 23
&
“Cleaning the Scanner Glass” on page 83
& “Printable Area” on page 121
Multiple Originals are Copied onto a Single Sheet
When you place multiple originals on the scanner glass to copy them separately, but they are copied onto a single
sheet, place the originals at least 5 mm apart. If the problem continues, place one original at a time.
Related Information
&
“Placing Originals on the Scanner Glass” on page 23
Cannot Print Without Margins
Make borderless setting in the print settings. If you select a paper type that does not support borderless printing,
you cannot select Borderless. Select a paper type that supports borderless printing.
Related Information
& “Menu Options for Printing Photos” on page 32
& “Menu Options for Copy” on page 54
& “Printing Basics - Windows” on page 33
User's Guide
Solving Problems
112
