673970
38
Zoom out
Zoom in
Previous page
1/238
Next page
Code Message Solution
E-13 Conrm the following:
Entered security key/password is
correct
Index of the security key/password
is set to the rst number
Connection and network setup of
the PC or other device is correct
Contact your network administrator
for assistance.
Check the following.
Network devices such as an access point, hub, and router are
turned on.
The TCP/IP Setup for network devices has not been set up
manually. (If the printer's TCP/IP Setup is set automatically while
the TCP/IP Setup for other network devices is performed
manually, the printer's network may dier from the network for
other devices.)
If it still does not work after checking the above, try the following.
Make network settings on the computer that is on the same
network as the printer using the software disc supplied or using
the software downloaded from the website.
http://epson.sn
You can register several passwords on an access point that uses
the WEP security type. If several passwords are registered, check if
the
rst
registered password is set on the printer.
b. Messages on the Network Environment
Message Solution
*Multiple network names (SSID) that
match your entered network name (SSID)
have been detected.
Conrm
network
name (SSID).
The same SSID may be set on several access points. Check the settings on the
access points, and change the SSID.
*Signal strength is low. If you have
problems printing or scanning, improve
your wireless network environment.
The printing speed may be slow or printing may stop due to medium signal
strength. Placing the printer close to the access point, or removing any
obstacles between the access point and the printer may improve the
environment.
*A router/access point channel conict has
been detected. If you have problems
printing or scanning, improve your wireless
network environment.
Signal interference can be caused by other wireless networks being used in
nearby rooms or buildings. Placing the printer close to the access point, or
changing the access point channel setting may improve the environment. See
the documentation provided with the access point for details.
*Signal strength is low. A router/access
point channel
conict
has been detected. If
you have problems printing or scanning,
improve your wireless network
environment.
The printing speed may be slow or printing may stop due to low signal
strength. Signal interference can be caused by other wireless networks being
used in nearby rooms or buildings. Placing the printer close to the access
point, or changing the access point channel setting may improve the
environment. See the documentation provided with the access point for
details.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.
You can simultaneously connect up to four computers and smart devices in
Simple AP mode. To add another computer or smart device, disconnect one
of the connected devices rst.
Related Information
&
“Connecting to a Computer” on page 24
&
“When You Cannot Make Network Settings” on page 190
User's Guide
Network Settings
38
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson ET 16500 Ecotank at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson ET 16500 Ecotank in the language / languages: English as an attachment in your email.

The manual is 5,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson ET 16500 Ecotank

Epson ET 16500 Ecotank Quick start guide - English - 4 pages

Epson ET 16500 Ecotank User Manual - German - 254 pages

Epson ET 16500 Ecotank Quick start guide - German, Dutch - 4 pages

Epson ET 16500 Ecotank User Manual - Dutch - 245 pages

Epson ET 16500 Ecotank User Manual - French - 250 pages

Epson ET 16500 Ecotank Quick start guide - French, Italian - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info