605824
8
Zoom out
Zoom in
Previous page
1/83
Next page
The power-supply cords should be placed to avoid abrasions, cuts, fraying, crimping, and kinking. Do not place
objects on top of the power-supply cords and do not allow the power-supply cords to be stepped on or run over. Be
particularly careful to keep all the power-supply cords straight at the ends and the points where they enter and
leave the transformer.
If you use an extension cord with the product, make sure that the total ampere rating of the devices plugged into
the extension cord does not exceed the cord’s ampere rating. Also, make sure that the total ampere rating of all
devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.
If you plan to use the product in Germany, the building installation must be protected by a 10 or 16 amp circuit
breaker to provide adequate short-circuit protection and over-current protection for the product.
When connecting the product to a computer or other device with a cable, ensure the correct orientation of the
connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation may
damage both devices connected by the cable.
Place the product on a flat, stable surface that extends beyond the base of the product in all directions. If you place
the product by the wall, leave more than 10 cm between the back of the product and the wall. The product will not
operate properly if it is tilted at an angle.
When storing or transporting the product, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
Allow spaces behind the product for the cables, and space above the product so that you can fully raise the printer
cover.
Avoid places subject to rapid changes in temperature and humidity. Also, keep the product away from direct
sunlight, strong light, or heat sources.
Do not insert objects through the slots in the product.
Do not put your hand inside the product during printing.
Do not touch the white flat cable and ink tubes inside the product.
Do not use aerosol products that contain flammable gases inside or around the product. Doing so may cause
fire.
Do not move the print head by hand; otherwise, you may damage the product.
Always turn the product off using the P button. Do not unplug the product or turn off the power at the outlet until
the P light stops flashing.
Before transporting the product, make sure that the print head is in the home (far right) position.
If any of the ink tanks are not filled up to the lower line, refill the ink soon. Continued use of the product when the
ink level is below the lower line on the tanks could damage the product.
If you are not going to use the product for a long period, be sure to unplug the power cord from the electrical
outlet.
Handling ink
We will provide ink-related safety instructions and product advice/warnings in the linked section.
User’s Guide
Important Instructions
8
8


Need help? Post your question in this forum.

Forumrules
1

Forum

epson-et-14000-ecotank

Reset search

  • epson 14000 the machine request for reseter which i reseter its after some time the machine is not displaying any more
    Submitted on 12-12-2022 at 05:56

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson ET-14000 Ecotank at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson ET-14000 Ecotank in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson ET-14000 Ecotank

Epson ET-14000 Ecotank User Manual - German - 85 pages

Epson ET-14000 Ecotank User Manual - Dutch - 84 pages

Epson ET-14000 Ecotank User Manual - French - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info