Is the image brightness set correctly?Check the Brightness and Power Consumption settings from the Configuration menu.
sImage - Brightnessp.74
s
Settings - Power Consumptionp.77
Is the
contrast
g
adjusted correctly?Adjust the Contrast setting from the Configuration menu.
sImage - Contrastp.74
Is it time to replace the lamp?When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When
this happens, replace the lamp with a new lamp.
s "Replacing the Lamp" p.115
Has the projector been left unattended without an image signal being
input?
If no operations are performed on the projector while no image signal is being input, the lamp is automatically dimmed
to prevent electricity being wasted. When an image signal is input or an operation is performed on the projector, the
projector returns to the previous brightness setting.
Is Sleep Mode set to On?If no operations are performed on the projector for approximately five minutes while no image signal is being input, the
lamp is automatically dimmed to prevent electricity being wasted.
Problems when Projection Starts
The projector does not turn on
CheckRemedy
Did you press the [
] button on the remote control or the [
t
]
button on the control panel?
Press the [] button on the remote control or the [
t
] button on the control panel to turn on the projector.
Are the indicators switched off?The power cord is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cord.
Check that your electrical outlet or power source is functioning correctly.
Do the indicators turn on and off when the power cord is touched?There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If this
does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Epson Epson EB-4650 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Epson Epson EB-4650 in the language / languages: English as an attachment in your email.
The manual is 15,25 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
