537687
76
Zoom out
Zoom in
Previous page
1/156
Next page
Submenu Function
Auto Setup
(Only available when an analog RGB computer signal is
being input.)
Set to On to automatically adjust Tracking, Sync., and
Position to the optimum state when the input signal
changes.
Resolution
(Only available when an analog RGB computer signal is
being input.)
Set to Auto to automatically identify the resolution of the
input signal. If images are not projected correctly when set
to Auto, for example if some of the image is missing, set to
Wide for wide screens, or set to Normal for 4:3 or 5:4
screens depending on the connected computer.
Manual allows you to specify the resolution. This is ideal
when connected computer is fixed.
Tracking
(Only available when an analog RGB computer signal is
being input.)
You can adjust computer images when vertical stripes
appear in the images.
Sync.
(Only available when an analog RGB computer signal is
being input.)
You can adjust computer images when flickering, fuzziness,
or interference appear in the images.
Position
You can adjust the display position up, down, left, and right
when a part of the image is missing so that the whole image
is projected.
3D Setup
*
When projecting passive 3D images using two projectors, set
3D Images to On.
Progressive
Interlace
g
(i) signal is converted to Progressive
g
(p). (IP
conversion)
Off: Ideal for images with a large amount of movement.
Video: Ideal for general video images.
Film/Auto: This is ideal for movie films, computer graphics,
and animation.
Submenu Function
Noise Reduction
(This cannot be set when Image Processing is set to
Fast.)
Smoothes out the roughness in progressive images. There
are two modes. Select your favorite setting. It is
recommended that this is set to Off when viewing image
sources in which noise is very low, such as for DVDs.
Mosquito NR
(This cannot be set when Image Processing is set to
Fast.)
When a progressive signal is being input, you can reduce
the wavy noise that occurs in lines between areas with
dramatic changes in colors.
Video Range
Select the video range for the input signal from the HDMI
port and the DisplayPort. Set to Expanded if you are
concerned about misadjusted black levels or blown out
highlights in the image.
Input Signal
You can select an input signal from the Computer port or
BNC port.
If set to Auto, the input signal is set automatically
according to the connected equipment.
If colors do not appear correctly when set to Auto, select
the appropriate signal according to the connected
equipment.
Video Signal
You can select an input signal from the Video port or S-
Video port. If set to Auto, video signals are recognized
automatically. If interference appears in the image or a
problem occurs such as no image is being projected when
set to Auto, select the appropriate signal according to the
connected equipment.
Aspect
You can set the
aspect ratio
g
for projected images.
s "Changing the Aspect Ratio of the Projected Image "
p.45
List of Functions
76
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Epson EB-4650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Epson EB-4650 in the language / languages: English as an attachment in your email.

The manual is 15,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson Epson EB-4650

Epson Epson EB-4650 Quick start guide - All languages - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info