fMail is not received even if a problem occurs with the projector (EMP-83/822 Only)
CheckRemedy
Is the remote control light-emitting area pointing towards the
remote receiver on the projector when it is operated?
Point the remote control towards the remote receiver.
The operating angle for the remote control is about 30 horizontally, and about 15 vertically.
sQuick Start Guide
Is the remote control too far from the projector?The operating range for the remote control is about 6 m. sQuick Start Guide
Is direct sunlight or strong light from fluorescent lamps
shining onto the remote receiver?
Set the projector up in a location where strong light does not shine onto the remote receiver. For EMP-83/
822, set the remote receiver to "Off" from "Remote Receiver" in the configuration menu. s"Settings"-
"Remote receiver" p.28
Is the correct setting for the remote receiver selected?
(EMP-83/822 only)
Check the "Remote Receiver" in the configuration menu. s"Settings"-"Remote receiver" p.28
Are the batteries dead or have the batteries been inserted
correctly?
Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary. sp.51
Was a remote control button pressed for more than
30 seconds?
If any of the buttons on the remote control are pressed down for more than 30 seconds, the remote control
stops sending signals (remote control's sleep mode). When the button is released, normal remote control
operation resumes. This can prevent the batteries from running down accidentally because Sleep Mode
operates when the remote control is stored in a bag or if an object is placed on top of it.
CheckRemedy
Is "Standby Mode" set to "Network On"?To use the Mail Notification function when the projector is in standby, set "Network On" from "Standby
Mode" in the configuration menu. s"Extended"-"Standby Mode" p.29
Did a fatal problem occur and the projector come to a sudden
stop?
When the projector comes to a sudden stop, mail cannot be sent.
If the problem continues, contact your local dealer or the nearest address provided in the International
Warranty Terms. sInquiries
Is power being supplied to the projector?Check that your electrical outlet or power source is functioning correctly.
Is the LAN cable connected correctly?Check that the LAN cable is connected correctly. Reconnect it if it is not connected or it is not connected
correctly. sp.62
Is "Mail" set correctly in the configuration menu?Mail notification of problems is sent according to the "Mail" settings in the configuration menu. Check if it
is set correctly. s"Network Menu"-"Mail Menu" p.32
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Epson emp x56 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Epson emp x56 in the language / languages: English as an attachment in your email.
The manual is 2,35 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
