617846
64
Zoom out
Zoom in
Previous page
1/82
Next page
62
When using external video or computer mode
At these times Check here
Reference
page
No images appear Is the power for the connected equipment turned on?
Switch on the power to the connected equipment, or start playback
depending on the playback method for the connected equipment.
sp. 47
When signals have been connected to both the S-video input port and
the Video input port, only the S-video signal becomes available. If
you want to watch the image from the equipment connected to the
Video input port, disconnect the cable from the S-video input port.
-
“Signal not supported” is
displayed
When external video equipment is connected
If projection is disabled even when the “Video Signal” is set to
Auto” in the visual setup menu, set the signal format that is
appropriate to the device.
sp. 58
When a computer is connected
Are the resolution and refresh rate modes for the image signal
compatible with the unit?
Use the computer’s documentation and so on to check and change the
resolution and the refresh rate for the image signal being output by
the computer.
sp. 70
“No signal.” is displayed Are the cables connected correctly? sp. 44 - 46
Is the power for the connected equipment turned on? Turn on the power
for the connected equipment. Press the playback button according to
the connected video equipment.
sp. 47
Is a laptop computer or a computer with a built-in LCD screen
connected?
Change the image signal’s output destination from the computer.
sp. 48
Press to switch to DVD.
sp. 47
The signal is distorted If an extension cable is used, electrical interference may affect the
signals. Connect amplification equipment and check.
-
Is the computer’s image signal resolution mode compatible with the
unit?
Use the computer’s documentation and so on to check and change the
resolution for the image signal being output by the computer.
sp. 70
Press the button on the remote control if interference or
flickering appear in the computer image being projected. “Running
Auto Setup···” is displayed and synchronization, tracking, and
position are automatically adjusted.
-
Image is truncated (large) or
small
The unit automatically recognizes the aspect ratio appropriate to
input signals and projects images. If the aspect ratio is not selected
correctly, press and select the aspect ratio appropriate to the
input signal.
sp. 41
Press the button on the remote control if part of the computer
image being projected is missing. “Running Auto Setup···” is
displayed and synchronization, tracking, and position are
automatically adjusted.
-
Image colors are not right In the visual setup menu, set the “Video Signal” to the signal format
appropriate to the device.
sp. 58
Moving images being
played back by the
computer become black
Change the computer’s image signal to external output only.s Check
the “Documentation” supplied with the computer for more information,
or inquire to the computer’s manufacturer.
-
Sound does not come on If the HDMI cable is used and sound does not come on, set the
connected device to the PCM output mode.
-
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EMP-TWD10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EMP-TWD10 in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EMP-TWD10

Epson EMP-TWD10 User Manual - German - 85 pages

Epson EMP-TWD10 User Manual - Dutch - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info