Manual Epson emp twd1 (page 7 of 72) (English)

214490

Zoom out

Zoom in

1/72

Take note of the following advice in order to prevent malfunction and damage.

• Use and store this unit within the operating

temperature range and storage temperature

range as specified in this manual.

• Do not install the unit in a place prone to

vibration or shock.

• Do not install the unit close to television, radio or

video equipment that generates magnetic fields.

This may have a negative effect when projecting the

playback of audio and image with this unit, and may

cause this unit to malfunction.In the event that such

symptoms occur, move the unit further away from

any television, radio and video equipment.

• Do not install this machine on an incline.

• Do not move this unit during playback.

This may damage the disc or cause malfunction.

• Avoid using or storing this unit in cigarette or

other smoke filled places, or in rooms containing

a large amount of dust.

This may cause degradation of the image quality.

• Do not touch the projection lens with your bare

hands.

If fingerprints or marks are left on the face of the

lens, the image will not be projected clearly.Make

sure the lens cover is securely in place when not in

use.

• EPSON will not be held responsible for damage

arising from projector or lamp failure outside the

range of that which is covered in your warranty

terms.

If you move this unit from a cold place into a warm

room, or, if the room in which this unit is installed is

heated rapidly, condensation (moisture) may form

internally or on the lens surface.If condensation forms,

it may not only cause incorrect operation such as

weakening of the image, but also damage the disc and/

or parts.In order to prevent against condensation, setup

this unit in the room approximately one hour before it is

to be used.If by some chance condensation does form,

turn on the main power switch then wait one to two

hours before use. Do not use the lamp during this time.

This machine uses a mercury lamp with a high internal

pressure as its light source.Mercury lamps have the

following characteristics.

• Lamp brightness decreases once the rated lamp usage

time has passed.

• When the lamp reaches the end of its life, it may enter

a state where it will no longer light, or it may explode

with a loud noise due to impact, deterioration, or the

expiration of its usage time.

• Depending on the individual difference of each lamp

and the conditions of use, there is a considerable

difference in the time it takes for the lamp to reach the

end of its life.

To provide against contingencies, prepare a

replacement lamp in advance.

• The potential for the lamp to explode increases once

the lamp usage time has been exceeded.

When the lamp replacement message appears,

promptly replace the lamp with a new one.

• Although the liquid crystal panel is made using very

precise high technology, you may see some black

pixels, or pixels that are always lit red, blue, or

green.You may also be able to see lines with irregular

brightness or color.

These are normal characteristics of liquid crystal

panels, and are not indicative of any malfunction.Be

aware of this fact.

• Do not leave this unit projecting a still image over a

long period of time.

It is possible that remnants of the image may remain

(screen burn). You may be able to avoid screen burn

by switching off the power and leaving the projector

for a while.If the screen burn does not disappear,

contact your dealer for advice. sp. 66

Use and Storage

Notes on handling and storage

Condensation

Lamp

LCD panel

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp twd1 in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson emp twd1

Epson emp twd1 User Manual - German - 80 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Epson emp twd1 Manual

Product: