214876
34
Zoom out
Zoom in
Previous page
1/60
Next page
32
Configuration Menu Functions
(This can be set only when signals are being input from the [Video] / [S-Video] input port, 525i, 625i
signals are being input from the [SCART] input port, or 525i, 625i, 1125i signals are being input from
the [Component] / [HDMI] input port.)
Interlace
(i) signals are converted to progressive (p) signals using a method appropriate for the image.
Off :This is ideal for using when viewing images with a large amount of movement.
Video :This is ideal for general video images.
Film/Auto :By pulling down 3-2
/2-2, images (e.g. video films/CG or animations) recorded in 24/30
frames are automatically converted to the optimum progressive signals so that images are
reproduced looking natural as originally intended.
(This can be set only when signals are being input from the [Video] / [S-Video] input port, 525i, 625i
signals are being input from the [SCART] input port, or 525i, 625i, 1125i signals are being input from
the [Component] / [HDMI] input port.)
Select whether the progressive conversion operation mode is for fast-moving images or for slow-moving
images. The smaller the value, the more suitable the mode is for viewing still images. The larger the
value, the more suitable the mode is for viewing video images.
This reduces flickering of images.
Three modes are available. Select the mode to suit your liking.
Set "Off" when the image source, such as DVD, contains little electrical interference.
(Setting is not possible when composite video
, S-Video , or computer signals are being input.)
This changes the display area (the part of projected images).
100% - 92% :When 100% is set, the top and bottom of the image is sometimes affected by electrical
interference depending on the image signal. In such cases, try to adjust the display
position ("Position"). p.31
Auto :Displayed when the signals from [HDMI ] input port are being input. Signals are
automatically projected at 100% or 92% size depending on the input signals. (Not displayed
when the equipment's DVI port is connected to the projector's [HDMI] input port.)
(This can be set when NTSC signals are being input from the [Video] / [S-Video] input ports, when
composite video signals are being input from the [Component] input port, or when signals are being
input from the [SCART] input port.)
If using products designed for destinations such as South Korea that have different black level (setup
level) settings, use this function to obtain correct images. Check the specifications of the connected
equipment when changing this setting.
(
Setting is only possible when Color Mode is "Natural", "Theatre", "Theatre Black 1", or "Theatre Black
2", and composite video, S-video, component video, or SCART signals are being input.)
If bright white areas of images such as clouds and T-shirts on the beach in summer appear uneven and
overexposed, set to "On". When set to "On", the "HDMI Video Range" setting will be ignored.
Displayed for input sources other than computer
Progressive
*1
Motion Detection
*1
Noise Reduction
*1
Output Scaling
*1
Setup Level
*1
EPSON Super White
*1
*1 The setting values are stored separately for each image source and signal type.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp tw980 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp tw980 in the language / languages: English as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson emp tw980

Epson emp tw980 User Manual - German - 60 pages

Epson emp tw980 User Manual - Dutch - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info