214269
42
Zoom out
Zoom in
Previous page
1/60
Next page
40
Problem Solving
TW500_English
Image colours are not right
Images appear dark
Vertical stripes appear in the projected images
Are the image signal format
settings correct?
If a composite video
or S-Video signal is being input
If projection does not occur when the "Video Signal" menu command is
set to "Auto", select the signal format that matches the signal source.
"Setting" - "Input Signal" - "Video Signal" p.22
If the signal source is connected to the [InputA] port, [InputB] port or
[D4] port
Use the "Input Signal" menu command to set the signal format that
matches the signal that is being projected from the connected
equipment.
"Setting" - "Input Signal" p.22
You can also press , or on the remote control to
select the format. Setup Guide
Are the cables connected
correctly?
Check that all of the cables required for projection are securely
connected. Setup Guide
Has the image Contrast
been adjusted correctly?
Use the "Contrast" or "White Level" menu command to adjust the
contrast.
"Image" - "Picture Quality" - "Input Adjustment" p.16
Has the colour been adjusted
correctly?
Use the "Color Adjustment" menu command to adjust the colour.
"Image" - "Color Adjustment" p.17
Have the colour intensity and
tint been adjusted correctly?
Use the "Color Intensity" and "Tint" menu commands to adjust the
colour and tint.
"Image"- "Picture Quality" - "Color Intensity", "Tint" p.16
Has the image brightness been
adjusted correctly?
Use the "Input Adjustment" and "Brightness" menu commands to make
the adjustments.
"Image" - "Picture Quality" - "Input Adjustment", "Brightness" p.16
Has the image contrast
been adjusted correctly?
Use the "Contrast" or "White Level" menu command to adjust the
contrast.
"Image" - "Picture Quality" - "Input Adjustment" p.16
Is the lamp due for
replacement?
When the lamp is nearly due for replacement, the images will become
darker and the colour quality will become poorer. When this happens,
the lamp should be replaced with a new one. p.46
Have you done the "LCD Panel
Adjustment"?
Adjust the "Vertical Stripe Adjustment R", "Vertical Stripe Adjustment
G" and "Vertical Stripe Adjustment B" in the "LCD Panel Adjustment"
in the configuration menu. "Adjusting LCD Panel Adjustment" p.43
Example
:
Only when projecting
images from a video
source
Image with vertical stripes Image after adjustment
TW500-E.book Page 40 Wednesday, June 30, 2004 9:35 AM
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp tw500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp tw500 in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info