214269
29
Zoom out
Zoom in
Previous page
1/60
Next page
27
Preparation for Using Cinema Color Editor
Adjusting projected images using a computer
TW500_English
Setting details
Set the following items depending on the network environment that is used.
The settings for the computer will vary depending on the operating system being used. Refer to the
computer documentation for details on the setting method.
When connecting directly to a computer
When connecting to a computer that is permanently connected to the Internet
If changing a numeric value, a cursor will be displayed, so use and to move the cursor to the
value to be changed and use and to display the desired value.
Once the desired value is displayed, press
to accept the setting.
DHCP
Set DHCP to "OFF".
IP Address
Enter a private IP address.
Example: 192.168.0.1 192.168.255.254
Set an IP address that does not overlap with the computer's IP address.
Subnet Mask
For example, set to 255.255.255.0.
Gateway
Address Enter the same address as the computer's IP address.
SNMP Trap IP Address 1/2
Two IP addresses can be set as notification addresses for SNMP traps.
To use the SNMP function to monitor the projector, you will need to have an
SNMP manager program installed on the computer. Ask the network
administrator to do this step.
If a notification cannot be sent to the IP address that has been set for "SNMP
Trap IP Address 1", then it is sent to the IP address that has been set for
"SNMP Trap IP Address 2".
MAC Address
This shows the MAC address for the projector.
Projector Name
This shows the individual name used for the projector to identify it on the network.
DHCP
Set DHCP to "ON".
If the DHCP function cannot be used or if assigning a static IP address, select "OFF".
IP Address
If "DHCP" is set to "ON", these items are set automatically, and so you do not
need to set them yourself.
If "DHCP" is set to "OFF", enter the address specified by your Internet Service
Provider.
Subnet Mask
Gateway Address
SNMP Trap IP Address 1/2
Two IP addresses can be set as notification addresses for SNMP traps.
To use the SNMP function to monitor the projector, you will need to have an
SNMP manager program installed on the computer. Ask the network
administrator to do this step.
If a notification cannot be sent to the IP address that has been set for "SNMP
Trap IP Address 1", then it is sent to the IP address that has been set for
"SNMP Trap IP Address 2".
MAC Address
This shows the MAC address for the projector.
Projector Name
This shows the individual name used for the projector to identify it on the network.
The following software is provided to allow you to monitor and control the status of
projectors over a network.
EMP NetworkManager: You can set destination addresses for the "Mail Notification
function" to use for sending e-mail messages to notify the computer operator when a
problem occurs with a projector.
EMP Monitor: This lets you monitor the status of more than one projector on the
network and to run batch operations such as turning projector power on and off and
changing signal sources from a computer's monitor screen.
For details on acquiring the software, please visit the following web site:
http://www.epson.co.uk/support/download/
TW500-E.book Page 27 Wednesday, June 30, 2004 9:35 AM
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp tw500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp tw500 in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info