215604
35
Zoom out
Zoom in
Previous page
1/64
Next page
33
Configuration Menu Functions
Configuration Menu
"Signal" menu
This lets you adjust the hue, saturation, and brightness for each of the R/G/B/C/M/Y color components.
p.20
This automatically enhances the contrast by calculating based on its current contrast. Select one of the
three levels to enhance the contrast. When a larger number is selected, the contrast becomes higher.
This lets you set the lamp brightness to one of two settings.
Set to "Low" if the projection images are too bright when projecting in a dark room or projecting onto a
small screen. When used at the "Low" setting, the power consumption and fan noise during projection is
reduced.
(Setting is not possible when "Color Mode" is set to "x.v. Color.")
Tracking speed of the light intensity control in response to changes in brightness of images can be set to
either "Normal" or "High Speed" depending on your preference. If set to "Off", no light intensity control
is performed. p.23
This returns all settings in the "Image" menu to their default settings.
Selects the aspect mode. p.18
This can be set only when "Aspect" is set to "Zoom".
This function enables the image to be reduced in size in the vertical direction so that the top and bottom
of images that are hidden from view can be viewed when "Zoom" is set. The larger the adjustment value
(reduction ratio) set here, the more the image is compressed and displayed squashed in the vertical
direction.
This can be set only when "Aspect" is set to "Zoom".
This function moves the display position of the image in one direction, up or down, to display captions
when projecting images with captions.
This adjusts the images if vertical stripes appear in the images.
This adjusts the images if flickering, fuzziness or interference appear in the images.
Flickering and fuzziness may also occur when the brightness, contrast
and sharpness settings are
adjusted.
Clearer adjustments can be obtained if you adjust the "Tracking" first and then adjust the "Sync".
Displayed for input sources other than computer image
Only displayed for Computer image input (does not appear when signals from the [HDMI1] /[HDMI2] input port are being input)
RGBCMY
*1
Contrast Enhancement (EH-TW4000 only)
Brightness Control
*2
Auto Iris
*3
Reset
Aspect
*1
Zoom Size
*1
Zoom Caption Pos.
*1
Tracking
*1
Sync.
*1
*1 The setting values are stored separately for each image source and signal type.
*2 The setting values are stored separately for each image source and color mode setting.
*3 The setting values are stored separately for each color mode setting.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp tw3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp tw3000 in the language / languages: English as an attachment in your email.

The manual is 3,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info