6486
40
Zoom out
Zoom in
Previous page
1/56
Next page
38
Problem Solving
Images appear dark
Projection stops automatically
Problems when projection starts
Power does not turn on
Other problems
No sound can be heard or the sound is faint
Have the colour intensity and
tint been adjusted correctly?
Use the "Color Saturation" and "Tint" menu commands to adjust the
colour and tint.
"Image"- "Picture Quality" - "Color Saturation", "Tint" p.26
Has the image brightness been
adjusted correctly?
Use the "Brightness" menu commands to make the adjustments.
"Image" - "Picture Quality" - "Brightness" p.26
Has the image contrast
been adjusted correctly?
Use the "Contrast" menu command to adjust the contrast.
"Image" - "Picture Quality" - "Contrast" p.26
Is the lamp due for
replacement?
When the lamp is nearly due for replacement, the images will
become darker and the colour quality will become poorer. When this
happens, the lamp should be replaced with a new one. p.42
Is sleep mode active?
When "Sleep Mode" has been set to ON, the lamp turns off
automatically if no signal is input for about 30 minutes, and the
projector switches to standby mode. Press the button on the
remote control or the button on the projector's control panel to
turn the projector's power back on. To cancel the sleep mode setting,
change "Sleep Mode" menu command to "OFF".
"Setting" - "Operation" - "Sleep Mode" p.29
Have you pressed the [Power]
button?
Press on the remote control or on the projector's control
panel.
Is "Child Lock" set to "ON"?
If the "Child Lock" menu command is set to "ON", press on the
projector's control panel for about 3 seconds or press on the
remoto control to turn the power on.
"Setting" - "Operation" - "Child Lock" p.29
Are all of the indicators
switched off?
Disconnect the power cable and then reconnect it. p.14
Check the circuit breaker to see if power is being supplied.
Do the indicators turn off and
on when the power cable is
touched?
Turn the power off, disconnect the power cable and then reconnect it. If this
does not solve the problem, there may be a problem with the power cable.
Then contact your dealer or the nearest address provided at "International
Warranty Conditions" in
Safety Instructions/World-Wide Warranty Terms
booklet.
Is the audio source connected
correctly?
Check that the cable is connected to the [Audio] input port.
Has the volume been adjusted
to the minimum setting?
Adjust the volume so that sound can be heard. p. 17
Is A/ V Mute mode active?
Press on the remote control to cancel the A/V mute.
Only when projecting
images from a video
source
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EMP-TW20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EMP-TW20 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EMP-TW20

Epson EMP-TW20 User Manual - German - 56 pages

Epson EMP-TW20 User Manual - Dutch - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info