215221
37
Zoom out
Zoom in
Previous page
1/56
Next page
Troubleshooting
35
Problem Solving
The message "Not Supported." is displayed
The message "No Signal." is displayed
Are the image signal format
settings correct?
If the signal source is connected to the [InputA] port
Use the "Input Signal" menu command to set the signal format that
matches the signal that is being projected from the connected
equipment.
"Setting" - "Input Signal" - "Input A" p.30
You can also press on the remote control to select the format.
p.15
If the VCR or DVD equipment is connected using an RGB SCART
adapter
Press to set the signal format to “RGB-Video”. p.15
When still no images appear and the DVD equipment is connected,
change the setting at the DVD equipment to RGB output.
Have the configuration menu
settings been made correctly?
Try resetting all of the current settings. p.31
Were the projector and
computer connected while their
power was already turned on?
If the connection is made while the power is already turned on, the
function (Fn) key that switches the computer's video signal to
external output may not work. Turn the power for the computer that
is connected to the projector off and then back on again.
Is the computer display output
set to only the computer's
accessory screen?
The image signals need to be output externally. Change the output
setting to an external destination only or to an external destination as
well as the computer's own monitor.
Computer documentation, under a title such as "External output"
or "Connecting an external monitor"
Are the image signal format
settings correct?
If a composite video or S-Video signal is being input
If projection does not occur when the "Video Signal" menu
command is set to "Auto", select the signal format that matches the
signal source. "Setting" - "Input Signal" - "Video Signal" p.30
If the signal source is connected to the [InputA] port
Use the "Input Signal" menu command to set the signal format that
matches the signal that is being projected from the connected
equipment. "Setting" - "Input Signal" - "Input A" p.30
You can also press on the remote control to select the format.
p.15
Does the mode match the
frequency and resolution of
the image signals?
Use the "Resolution" menu command to check the signals being
input, and check the "List of compatible signals" to make sure that
the signals are compatible.
"Info" - "Resolution" p.25
"List of Supported Monitor Displays" p.45
Are the cables connected
correctly?
Check that all of the cables required for projection are securely
connected. p.12
Has the correct video input
port been selected?
Press , , or on the remote control or on
the projector's control panel to change the image source. p.15
Is the power for the connected
equipment turned on?
Turn the power on for the devices.
When a computer is
connected
When a computer is
connected
Only when projecting
computer images
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp tw20 projector 1200ansi lumen at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp tw20 projector 1200ansi lumen in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info