6484
15
Zoom out
Zoom in
Previous page
1/72
Next page
13
Basic Operations
Procedure
Procedure to follow if using both horizontal and vertical keystone correction:
1. With the front adjustable foot retracted, set the projector so that it is fully horizontal.
2. Extend the front adjustable foot to adjust the angle as necessary.
3. Adjust the vertical keystone distortion until both sides of the picture are vertical.
4. Adjust the horizontal keystone distortion until the top and bottom edges of the picture are both horizontal.
When keystone correction is carried out, the projected image will become smaller.
The keystone correction settings are memorized, so that if you change the position or angle of
the projector, you may need to readjust the keystone correction settings.
To return a previous keystone correction to the initial setting, carry out the following operations.
To initalize vertical keystone correction: While holding down the button, press the button
for 1 second or more.
To initalize horizontal keystone correction: While holding down the button, press the
button for 1 second or more.
If there is any noticeable irregularity in the projected images after keystone correction has been
carried out, reduce the sharpness. (p.21, 22)
Keystone correction can also be carried out using the projectors environment setting menu.
(p.23)
If you carry out both horizontal and vertical keystone correction, the correction range will
become smaller than it would be if only one type of correction was carried out.
If the value displayed in the gauge on the screen stops changing when horizontal or vertical
keystone correction is being carried out, it indicates that the limit for horizontal or vertical
keystone correction has been exceeded. Check that the projector has not been set up at an
angle which exceeds the proper limit. (p.12)
If the horizontal (or vertical) keystone correction function is used at the same time that the E-
Zoom or P in P function is being used, the keystone correction amount may change when the E-
Zoom or P in P function is operated while the keystone correction amount is near the limit value.
The limit value for keystone correction will vary depending on the image signal being input.
Press the or button
on the projector's control
panel to adjust.
Sync+
Tracking - Tracking +
Sync-
Menu Esc
Keystone
Shift
Auto
Resize
Sync+
Tracking - Tracking +
Sync-
Menu Esc
Keystone
Shift
Auto
Resize
Projector Projector
Correcting vertical keystone distortion
Press the or button
on the projector's control
panel to adjust.
Sync+
Tracking - Tracking +
Sync-
Menu Esc
Keystone
Shift
Auto
Resize
Sync+
Tracking - Tracking +
Sync-
Menu Esc
Keystone
Shift
Auto
Resize
Projector Projector
Correcting horizontal keystone distortion
Adjusting the Image Size Correcting Keystone Distortion
Adjusting the Image Angle
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EMP-TS10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EMP-TS10 in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info