214408
10
Zoom out
Zoom in
Previous page
1/16
Next page
Double-click: Press twice in rapid succession.
The wireless mouse function may not operate correctly depending on the computer version
or function being used.
User’s Guide
"Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse Function)"
1. Hold down the button for approx.
1.5 seconds.
The button lights and drag and drop
mode is enabled.
2. Tilt the button to drag an item.
3. Press the button to drop the item.
Moving the mouse pointer
Drag and drop
When projecting images from a computer, the accessory projector's remote control can be used to
operate the computer's mouse pointer.
Mouse clicks
Using the remote
control for one-person
presentations
To use the wireless mouse function,
you need to connect the computer
using a USB cable in addition to the
computer cable.
Use the accessory USB cable to
connect the USB port of a computer
to the projector's [USB] port.
* An accessory USB cable is not
supplied with the EMP-9300. Use a
commercially-available USB cable
instead.
Functions for Enhancing Projection
Wireless Mouse Function
You can also drag and drop in the same way
using the button.
Right click
Left click
To previous slide
To next slide
Displaying previous or next slides in a
PowerPoint slideshow
Other useful functions
P in P
Function
This function lets you display separate images in a smaller screen (sub-
screen) over the top of the images that are currently being projected
(main screen).
Freeze
Function
The images are paused and unpaused each time this button is pressed.
(EMP-8300 only)
This lets you set the lamp brightness to one of two settings. Select "Low"
if the images being projected are too bright such as when projecting
images in a dark room or onto a small screen. When used at low
brightness, the life of the lamp will be extended.
This function lets you select the input source for projected images while
viewing the image contents on an external monitor.
Images can be checked on an external monitor while using the "A/V Mute"
function and while the projector is not projecting images (while it is in
standby mode).
Standby
Monitor Out
Projector ID/
Remote
Control ID
If using more than one projector at a time, such as at a show, you can
record ID numbers for the projectors and for the remote controls in order
to use a remote control to simultaneously operate only projectors with the
same ID number.
This lets you monitor multiple projectors and turn their power on and off
and change the signal sources via a network.
In addition, if a problem occurs with the projector, the projector can send
an e-mail message to notify someone of the problem.
Network
monitoring and
control
User's Guide
"Freeze Function"
User's Guide
"Advanced2 Menu"
User's Guide
"P in P (Picture in
Picture) Function"
User's Guide
"Connecting to an
External Monitor"
User's Guide
"Projector ID/Remote
Control ID"
User's Guide
"Projector Monitoring
and Control using a
Network"
Brightness
Control
9300E-QRG_06-09
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 9300nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 9300nl in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info