214266
54
Zoom out
Zoom in
Previous page
1/141
Next page
53
Functions for Enhancing Projection
User’s Guide
Press the [Enter] button.
The selected images are then projected in the active window.
If you press the [Enter] button once more, the preview function
is cancelled and the images in the active window are projected.
To return to the images that were being projected before the
preview function was activated, press the [Esc] or [Preview]
button.
Projecting Easy-to-see Images Without a Screen
(Wall Shot)
When the Wall Shot function is used, images can be projected without loss
of original colour even onto surfaces such as blackboards and coloured
wall surfaces which are being used instead of a screen.
For example, if projecting onto a green blackboard, the projected images
would normally appear greenish and be very difficult to see. The Wall Shot
function uses a sensor to measure the condition of the projection surface
and automatically adjusts the colour of the projected images based on these
measurements.
The Wall Shot function also allows shading to be adjusted. If projecting
onto a screen that is located near a window, the Wall Shot function can be
used to obtain clear images when they might otherwise appear faded.
3
Video
S-Video
ComputerComputer
Easy MP
S-Video
TIP
• You can hear the sound for the images in the active window while
the preview window is being displayed.
• Images other than the image in the active window will be projected
as still images.
• If you press the [Preview] button while E-Zoom function is active or
real display is being used, these functions will be cancelled and the
preview screen will be displayed. If you cancel the preview function
without changing the input source, the projected images will return
to the state they were at before the preview function was activated.
TIP
• Wall Shot can be used for adjustment if the projection distance is
within approximately 86–750 cm (2.8–24.6 ft.). However, this
distance will vary depending on the condition of the projected
surface, for instance if the projection surface is an extremely
reflective surface such as a whiteboard, or if it is a highly non-
reflective surface such as a dark wall.
• The sensor may not be able to correctly measure the condition of the
projection surface if you are projecting on a striped or patterned
wall. In this event, Wall Shot may not be able to correctly adjust the
color of the projected images.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 830 in the language / languages: English as an attachment in your email.

The manual is 11,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info