214265
39
Zoom out
Zoom in
Previous page
1/108
Next page
38
Adjusting the Screen Image
PROCEDURE
While pulling the foot adjust lever at the front of the
projector, lift up the front of the projector to extend the
front adjustable foot.
Extend the front adjustable foot until the desired angle is obtained,
and then release the foot adjust lever.
To retract the front adjustable foot, gently push down on the projector
while pulling the foot adjust lever.
If you tilt the projector up, keystone distortion will occur in the projected
screen. However, the projector is equipped with an automatic keystone
correction function that can automatically correct this keystone distortion
on the screen. Automatic keystone correction is carried out approximately
one second after the projector is tilted vertically while the power is on.
Keystone distortion can be corrected automatically as long as the vertical
angle of tilt is within a range of approximately 30º *.
* • This value applies when the zoom ring is turned to the maximum "T"
setting. If the zoom ring is turned to the "W" setting, the available angle
of tilt for automatic adjustment will be less.
• If the angle of tilt is large, it will become more difficult to adjust the
focus correctly. In order to obtain better picture quality, set the projector
up so that the angle of tilt is small.
Foot adjust lever (Front)
TIP
If the projector is tilted vertically or horizontally, turn the bases of the
rear adjustable feet to make fine adjustments to the height of the
projector. When the projector is tilted horizontally, the correction may
not be carried out correctly. sp.38
Extend Retract
Rear
adjustable foot
TIP
Automatic keystone correction is not carried out when the
"Projection" command in the "Extended" menu is set to "Front".
If you would like to make further fine adjustments after automatic
keystone correction has been carried out, press the [ ] and [ ]
buttons on the projector's control panel. sp.39
When keystone correction is carried out, the projected image will
become smaller.
If the images become uneven in appearance after keystone correction
is carried out, decrease the sharpness setting. sp.51, p.53
If automatic keystone correction is not required, set "Auto
Keystone" in the "Setting" menu to "OFF". sp.59
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 821 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 821 in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info