6466
21
Zoom out
Zoom in
Previous page
1/118
Next page
19
Connecting to a Computer
Caution :
When connecting the projector to a computer, be sure to check the following.
• Turn off the power for both the projector and the computer before connecting them. If
the power for either device is on at the time of connection, damage may result.
• Check the shapes of the cable connectors and the device ports before making the
connections. If you try to force a connector to fit a device port with a different shape or
number of terminals, damage to the connector or port may result.
Eligible Computers
The projector cannot be connected to some types of computer, or projection of
images may not be possible even if actual connection is possible. Make sure
that the computer you intend to use satisfies the conditions given below.
Condition 1: The computer must have a video signal output port.
Check that the computer has a port such as an RGB port, monitor port or
video port which can output video signals. If you are not sure how to check
this, refer to the Users Guide for your computer under a heading such as
"Connecting an external monitor" or similar.
If the computer has a built-in monitor, or if using a laptop or notebook-style
computer, it may not be possible to connect the computer to the projector, or
alternatively you may need to purchase a separate external output port. Refer
to the Users Guide for your computer for further details.
Condition 2: The display resolution and frequency of the computer must be
listed in the "List of Supported Monitor Displays".
The resolution and frequency of the video signals output from the computer
must correspond to a setting in the "List of Supported Monitor Displays" in
the Appendix (P.105), otherwise the signals cannot be projected.
Check the Users Guide for the computer for details on the resolution and
frequency of the computer's video signals and on the setup method.
Tip :
Some computers allow you to change the output resolution, so if necessary, change the
resolution to one that matches a setting in the "List of Supported Monitor Displays".
See “Appendix: List of Supported Monitor Displays”(P.105)
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EMP-810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EMP-810 in the language / languages: English as an attachment in your email.

The manual is 4,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info