214749
143
Zoom out
Zoom in
Previous page
1/165
Next page
142
Maintenance
User’s Guide
PROCEDURE
Turn the projector's power off, wait for the cool-down
period to end, and then disconnect the power cable.
The cool-down period lasts for about 20 seconds.
TIP
• The lamp replacement message is set to appear after the following
periods of time in order to maintain the initial brightness and quality
of the projected images.
·When used continuously at high luminance: Approx. 1900 hours
·When used continuously at low luminance: Approx. 2900 hours
"Brightness Control" p.92
If you continue to use the lamp after this period, the possibility of the
lamp breaking becomes greater. When the lamp replacement
message appears, replace the lamp with a new one as soon as
possible, even if it is still working.
• Depending on the characteristics of the lamp and on the way it has
been used, the lamp may become darker or stop working before the
lamp warning message appears. You should always have a spare
lamp ready in case it is needed.
• Contact your dealer for a spare lamp.
Replacing the Lamp
CAUTION
• If you are replacing the lamp because it has stopped working, it is
possible that the lamp is broken.
If replacing the lamp of a projector which has been installed on the
ceiling, you should always assume that the lamp is broken and
handle it with extreme care during removal. Furthermore, you
should stand to the side of the projector, not underneath it.
Wait until the lamp has cooled down sufficiently before removing the
lamp cover. It takes a further one hour after the cool-down
gperiod
has finished for the lamp to be cool enough.
143


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 7950nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 7950nl in the language / languages: English as an attachment in your email.

The manual is 9,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info