214749
93
Zoom out
Zoom in
Previous page
1/165
Next page
92
Using the Configuration Menu FunctionsUsing the Configuration Menu Functions
User’s Guide
"Advanced2" Menu
Brightness Control High Low
:
Video
Audio
Setting
User's Logo
Advanced1
About
Reset All
Projector ID
Network
Reset
Execute
: 1
[Menu]: Exit[ ]: Enter[ ]: Select
Effect
Advanced2
COM Port
BNC Sync Termination
:
ON OFF
:
Direct Power ON
ON OFF
:
Operation Lock
ON OFF
:
Set
Set
RS-232C USB
Auto Setup
ON OFF
:
Sub-menu Function Default
Brightness
Control
This lets you set the lamp brightness to one of two settings.
Select "Low" if the images being projected are too bright
such as when projecting images in a dark room or onto a
small screen.
When "Low" is selected, the brightness of the images is
reduced, but the amount of electricity consumed and noise
produced during projection are reduced and the lamp's
operating life is extended.
High
Projector
ID
Sets the ID number for the projector. p.74 1
Network (EMP-7900 only)
Sets the DHCPg, IP Addressg, Subnet Maskg and
Gatewayg Address when the projector is connected to a
network and the EMP Monitor function or mail notification
function are being used. It also lets you set the IP address
for a computer to use for notification of problems when
using SNMPg for network monitoring. p.101
-
COM Port This can be set to either "RS-232C" or "USB" depending on
the port that is being used for communication with a
computer.
To enable the new settings, turn the projector's power off
and wait until the cool-downg is finished.
RS-232C
Auto Setup Selects whether the automatic adjustment function for
automatically optimising images when the input source is
switched to computer analogue images.
ON
BNC Sync
Termination
Sets the termination mode for the [BNC] port. This is used
for image terminal processing.
ON : Analogue (75 ) termination
OFF: TTL (Normal signal level output by the computer)
input
This should normally be set to "OFF". If an analogue (75
) termination such as for a switcher is required, change
the setting to "ON".
OFF
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 7950nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 7950nl in the language / languages: English as an attachment in your email.

The manual is 9,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info