214749
53
Zoom out
Zoom in
Previous page
1/165
Next page
52
Adjusting the Image Quality
User’s Guide
To change the status, press the [Wall Shot] button
while the status is being displayed on the screen.
For example, if you press the [Wall Shot] button while "Wall
Shot OFF" is displayed, the status will change to "Wall Shot
ON" and measurement of the projection surface will start.
Colours in the order red
green
blue
black will be
projected for approximately five seconds while measurement is
in progress.
Once the measurement is finished and colour
correction is complete, the images will be projected
in the corrected condition.
To cancel the correction, press the [Wall Shot] button while
"Wall Shot ON" is being displayed on the screen so that "Wall
Shot OFF" is selected.
Wall Shot ON
TIP
• When the projector's power is turned off, images will be projected
next time with the status set to "Wall Shot OFF". However, the
correction values that were obtained by the previous measurement
operation will be stored even when the power is turned off.
If projecting in the same location as before, you can retrieve the
colour correction values that were used previously (the five seconds
required for readjustment will not be necessary).
The status will change as follows each time the [Wall Shot] button is
pressed.
When "Wall Shot retrieval" is selected, the previous adjustment
values are retrieved.
• If you change the projection location or change the condition of the
projection surface, you should repeat the Wall Shot measurements.
If you press the [Wall Shot] button twice while "Wall Shot ON" is
being displayed, "Wall Shot Readjustment" will be displayed and
adjustment will then start.
Wall Shot Memory Call
Wall Shot ON
Wall Shot OFF
Wall Shot Readjustment
Wall Shot ON
Wall Shot OFF
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 7950nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 7950nl in the language / languages: English as an attachment in your email.

The manual is 9,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info