214262
59
Zoom out
Zoom in
Previous page
1/142
Next page
58
EMP-7850 Users Guide
Preventing theft (Password Protect)
The projector is provided with a Password Protect function. When
Password Protect is set to "ON", a password entry screen is displayed when
the power is next turned on after the power plug has been disconnected
from the electrical outlet, and you must enter a password before projection
can start. This means that the projector cannot be taken away and used by
someone else, thereby providing a defence against theft.
The default setting is for Password Protect to be "OFF". You should change
the Password Protect setting to "ON" and set a password as soon as
possible after starting to use the projector.
When Password Protect is enabled
When Password Protect is enabled (ON), a screen requesting you to enter a
password will be displayed when the power cable is connected to an
electrical outlet and the power for the projector is first turned on.
Use the numeric buttons on the remote control to set the password. p.59
If the correct password is entered, projection will then start.
If you leave the power plug connected to the electrical outlet, the screen
requesting a password to be entered will not be displayed the next time the
projector's power is turned on and projection can start straight away. The
password entry screen will only be displayed the first time the projector's
power is turned on after the power plug has been inserted into an electrical
outlet.
Password
Password
Enter the password.
Enter the password.
[0-9]:Enter
[0-9]:Enter
TIP
• If an incorrect password is entered three times in succession, the
message "The projector's operation will be locked." will be displayed
for approximately five minutes, and then the projector will switch to
standby mode. If this happens, disconnect the power plug from the
electrical outlet and then reinsert it and turn the projector's power
back on. The screen requesting you to enter the password will be
displayed, so enter the password correctly.
If you happen to forget the password, make a note of the "Request
code: xxxx" number that is displayed on the screen, and then contact
the nearest address provided in the "International Warranty
Conditions" section of the Safety Instructions/World-Wide Warranty
Terms booklet.
• If the above operation should happen to be repeated nine times
without a correct password being entered, the following message will
be displayed and the projector's power will not be able to be turned
on.
"The projector's operation will be locked. Contact the nearest
address provided in the "International Warranty Conditions" section
of the Safety Instructions/World-Wide Warranty Terms booklet.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 7850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 7850 in the language / languages: English as an attachment in your email.

The manual is 19,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info