214262
38
Zoom out
Zoom in
Previous page
1/142
Next page
37
Turning the Projector On
EMP-7850 User’s Guide
If more than one external device is connected to the
projector, use the remote control or projector control
panel buttons to select the image source to be
projected while referring to the following table.
You can also use the preview function to select the signal
source. p.38
*1 When these buttons are pressed once, the signal name that is currently
set using the configuration menus appears on the screen. You can
change the signal setting by repeatedly pressing the button while the
signal name is displayed. The result of this switching will also be
applied to the "Computer Input" or "BNC Input" setting in the "Setting"
menu.
*2 The input signal will not change to the next signal source unless the
[Computer/DVI] button is pressed while the current signal name is still
being displayed on the screen.
If an input signal from either the [DVI] or [Computer] port is currently
being projected, the name of this current input signal will be displayed
on the screen when the [Computer/DVI] button is pressed once.
*3 The item selected using the "Computer Input" command in the
"Setting" menu will appear. You can change the setting by pressing the
[Comp] button on the remote control.
*4 The input signal will not change to the next signal unless the [Video/
BNC] button is pressed while the current signal name is still being
displayed on the screen.
If an input signal from either of the [BNC], [S-Video] or [Video] ports
is currently being displayed, the name of this current input signal will
be displayed on the screen when the [Video/BNC] button is pressed
once.
*5 The item selected using the "BNC Input" command in the "Setting"
menu will appear. You can change the source to the next source in order
by pressing the [BNC] button on the remote control.
When using EasyMP, change the image source to
EasyMP. Refer to the EasyMP Setup Guide after
changing.
Port
Button to press
On-screen display
Remote
control
Projector
EasyMP [EasyMP]
The image
source changes
each time
[Computer/
DVI] is
pressed.
*2
EasyMP
Computer [Comp]
*1
Computer
(Analog-RGB)
*3
Computer
(RGB-Video)
*3
DVI [DVI] DVI
BNC [BNC]
*1
The image
source changes
each time
[Video/BNC] is
pressed.
*4
BNC(Analog-RGB)
*5
BNC(RGB-Video)
*5
BNC(YCbCr )
*5
BNC(YPbPr )
*5
S-Video [S-Video] S-Video
Video
[Video]
Video
5
Remote control
6
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 7850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 7850 in the language / languages: English as an attachment in your email.

The manual is 19,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info