214277
83
Zoom out
Zoom in
Previous page
1/121
Next page
82
Problems Solving
User’s Guide
The message "No Signal." is displayed
Images are fuzzy or out of focus
Check Remedy
Are the cables connected correctly? Check that all of the cables required for projection are securely connected. sp.20p.26
Has the correct video input port been
selected?
Press the [Computer], [S-Video], [Video] or [EasyMP](EMP-745/737 only) button on the remote
control or the [Source Search] button on the remote control or the projector's control panel to change
the image. sp.37
Is the power for the computer or video source
turned on?
Turn the power on for the devices. sp.36
Are the image signals being output to the
projector?
If the image signals are only being output to the computer's LCD monitor or to the accessory
monitor, you need to change the output to an external destination as well as the computer's own
monitor. For some computer models, when the image signals are output externally, they no longer
appear on the LCD monitor or accessory monitor.
s
Computer documentation, under a title such as "External output" or "Connecting an external
monitor"
If the connection is made while the power is already turned on, the function [Fn] key that switches
the computer's video signal to external output may not work. Turn the power for the projector and
the computer off and then back on again. sp.36, p.38
Check Remedy
Has the focus been adjusted correctly? Turn the focus ring on the projector to adjust the focus. sp.40
Is the lens cover still attached? Remove the lens cover. sp.35
Is the projector at the correct distance? The recommended projection distance range is 100–1210 cm (3.2–39.7 ft.). Set the projector up so
that it is within this range. sp.16
Is the keystone adjustment value too large? Decrease the projection angle to reduce the amount of keystone correction. sp.43
Has condensation formed on the lens? If the projector is suddenly taken from a cold environment to a warm environment or if sudden
ambient temperature changes occur, condensation may form on the surface of the lens, and this may
cause the images to appear fuzzy. Set the projector up in the room approximately one hour before it
is to be used. If condensation forms on the lens, turn the power off and wait for the condensation to
disappear.
Only when projecting images from
a laptop computer or computer
with a built-in LCD screen
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 740 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 740 in the language / languages: English as an attachment in your email.

The manual is 6,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info