214259
56
Zoom out
Zoom in
Previous page
1/100
Next page
54
The "About" menu shows the setting details for the current image source.
The "Lamp" item appears as 0H for 010 hours, and after that, it appears in
units of 1 hour.
Computer/RGB video/ Video (S-Video, Composite video)
Component video
(Analogue-RGB, YCbCr
, YPbPr )
"About" Menu
Sub-menu Function Default
Lamp Displays the cumulative lamp operating time.
When the lamp warning period is reached, the display
characters appear in red.
0H
Reset Lamp
Timer
Initialises the lamp operating time. When this command
is selected, the cumulative lamp operating time is reset to
the initial default value.
-
Video Source Displays the input source which is currently being
projected.
Input Signal Displays the input signal settings.
(Does not appear when the input source is composite
video or S-Video.)
Video Signal Shows the video signal format.
(Does not appear when the input source is computer,
component video or RGB video.)
-
Frequency Displays the horizontal and vertical scanning frequencies.
(Does not appear when the input source is composite
video or S-Video.)
-
SYNC
Polarity
Displays the sync polarity.
(Does not appear when the input source is composite
video or S-Video.)
-
: Select : Enter
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
Frequency
Video Source
V ---.--Hz
Reset Lamp Timer
H ---.--kHz
Lamp 0H
SYNC Mode
SYNC Polarity
------
V ------
H ------
Resolution
Refresh Rate 0.0 Hz
0x 0
Computer
Input Signal
:
:
:
:
:
:
:
: RGB
Execute
Video
Auto( )
: Select : Enter
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
Video Source
Reset Lamp Timer
Lamp
0H
Video Signal
:
:
:
Execute
Using the Configuration Menu Functions
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 730 in the language / languages: English as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info