6488
73
Zoom out
Zoom in
Previous page
1/82
Next page
71
Glossary
This glossary provides brief explanations of terms which are used in this
manual but are not explained in the text or difficult to understand. For details,
refer to other available publications.
Term Description
A/V Mute Refers to temporary stoppage of audio and video. Your projector
provides this function when the A/V Mute button is pressed. When
the A/V Mute button is pressed again or audio volume is adjusted,
this function is released.
Aspect ratio The ratio between an image's length and its height. HDTV images
have an aspect ratio of 16:9 and appear elongated. The aspect ratio
for standard images is 4:3.
Color
difference
signal
(component)
A type of video signal output by video equipment which actually
consists of three separate signals: a red + luminance signal (R-Y), a
luminance signal (Y) and a blue + luminance signal (B-Y). Each
signal is transmitted along a separate cable. Color difference
signals generally result in a better image than composite signals (in
which the red, green and blue signals and the luminance signal are
all transmitted along a single cable).
Color
temperature
The temperature of an object which is emitting light. If the color
temperature is high, the colors tend to take on a bluish tinge. If the
color temperature is lower, the colors tend to take on a reddish tinge.
Contrast The enhancing or weakening of differences in color lightness and
darkness that provides a sharper or softer view of characters and
images. This adjustment is referred to as contrast adjustment.
Cool-Down After the Power button is pressed and the lamp goes out, lamp
cooling is continued. After the lamp goes out, a cooling fan spins,
and operational buttons become inactive.
Cool-down time takes about 2 minutes.
Gamma During image display, the difference of display colors depending on
the device used is compensated.
SVGA Refers to a 800-pixel (Pix) horizontal x 600-pixel (Pix) vertical
display signal for an IBM PC/AT-compatible (DOS/V) computer.
SXGA Refers to a 1280-pixel (Pix) horizontal x 1024-pixel (Pix) vertical
display signal for an IBM PC/AT-compatible (DOS/V) computer.
Sync
(synchronization)
Signals output by a computer are output at a certain predetermined
frequency.
If the frequency of your projector cannot match that frequency, a
clear image cannot be obtained. Matching of signal phases (peak
offset) is referred to as synchronization (synch).
If synchronization is not achieved, a projected image displays jitters,
blurring, and horizontal noise.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EMP-71 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EMP-71 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info