500309
36
Zoom out
Zoom in
Previous page
1/100
Next page
■ ■ ■ ■
22
Connecting to a Video Source
You can connect a VCR, a camcorder, a laser disc player,
DVD player, or any other compatible video image source to
your projector.
The projector can receive composite video or S-Video. Your
equipment has composite video if your video source has a
one-pin RCA video jack. Your equipment has S-Video if your
video source has a four-pin (mini-DIN) video jack.
Note: The projector is not compatible with a cable TV-style F
connector.
You can connect the projector to an S-Video source and a
composite video source at the same time.
The projector supports NTSC, PAL, and SECAM video
formats, and automatically detects and identifies the video
format. However, you can specify that a single broadcast
format be detected. (See Chapter 3.) Note that the projector
will then be able to detect only one type of video signal.
The type of cable you use to connect the video source to the
projector depends on whether you have composite video or
S-Video. For composite video, use the RCA audio and RCA
video cable supplied with the projector. For S-Video, use the
S-Video cable supplied with your video device or obtain one
from your computer or video equipment dealer.
To connect a video source to the projector:
1. Turn off the projector and video source if they are on.
4
2
3
1
S-Video
4-pin, mini-DIN
composite
RCA
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EMP-703 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EMP-703 in the language / languages: Dutch as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info