36098
5
Zoom out
Zoom in
Previous page
1/85
Next page
iii
English
Enlarge Reduce
Normal
Wide Top
Wide Base
Extend Retract
Rear Adjustable
Foot
* If you turn the power on straight after turning it off, the time before projection starts becomes longer than usual.
* For video equipment,
press "play" to start
playback.
Control Panel Remote Control
Power Indicator
Lit
Flashing
Orange
Standby
Press
to start
projecting.
Green
Green
Warming up
Wait for a short
time (about 30
seconds).
Projecting
In this mode, you can unplug
the power cable.
Reading the Indicators
In this mode pressing
has
no effect.
(Accessory
Power Cable)
Examples
NEC
Panasonic
SOTEC
HP
TOSHIBA
IBM
SONY
DELL
FUJITSU
Macintosh
Set mirror setting
or display
detection.
Depending on
your OS, you can
select them by
pressing .
Turning on and Projecting
When using the "Direct
Power On" feature, the
power turns on when the
power cable is connected.
When using above an
altitude of about 1500 m,
make sure you set the High
Altitude Mode to On.
User’s Guide "Extended
Menu"
No image is projected
For notebooks and computers with liquid
crystal displays
Change the computers
output source. Hold
down the
key and
press the appropriate
key (the one usually
labelled
/ ). After
changing the setting,
wait a few seconds for
projection to start.
Computer’s "User’s
Guide"
* If the image is not
projected, press
.
For video equipment
Start playback then
press
.
Adjusting Position and Focus
(Setting up for the first time or after moving)
Raising the Projection Position (Adjusting the front foot)
When moving the projector, make sure
the front foot is retracted.
You can adjust the front foot to raise the
projection angle up to a maximum of 10°.
Correcting Keystone Distortion
You can adjust the vertical tilt to a maximum of
about 30°*.
* The greater the angle of tilt, the harder the
image is to focus. Setup the projector at a lower
angle of tilt.
When the "Auto Keystone" function
is turned "Off" in the configuration
menu, automatic keystone
correction is not performed.
(EMP-82/62 only)
You can also make keystone
corrections from the configuration
menu.
User’s Guide "Settings Menu"
Hold down
and press for
more than one second to reset the
correction value to the default
setting.
Adjust the horizontal tilt by turning
the left rear foot.
Adjusting Focus
After keystone correction and
sharpness adjustments, the image
may be unfocused.
Adjusting Projection Size
Turning the Projector off
Turn off all connected equipment.
Press twice on the remote
control or control panel.
After the confirmation buzzer beeps
twice, unplug the power cable.
Electricity is consumed if only the projector's
power is turned off.
Attach the lens cover.
Foot Adjust
Lever
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EMP-62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EMP-62 in the language / languages: English as an attachment in your email.

The manual is 4,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EMP-62

Epson EMP-62 User Manual - German - 87 pages

Epson EMP-62 User Manual - Dutch - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info