214593
20
Zoom out
Zoom in
Previous page
1/79
Next page
Adjusting Colour for Several Projectors (Multi-Screen Colour Adjustment)
20
B
Choose the ID you want to set and press the [Enter]
button.
C
Press the [Menu] button to close the configuration
menu.
Point the remote control at the remote receiver on the projector
you want to operate, press the numeric button corresponding to
the screen ID set while holding down the [Num] button, and then
you can operate only the projector specified with the ID number.
You can operate all projectors regardless of the screen ID
settings by pointing the remote control at the remote receiver on
the projector, and pressing the [0] button while holding down the
[Num] button.
Image Correction Method
After setting up the projectors, adjust the brightness and tone for each
image.
A
Press the [Menu] button and select "Extended" -
"Multi-screen" - "Image Correction" from the
configuration menu. s "Using the Configuration
Menu" p.28
B
Select the level to be adjusted in "Adjustment
Level".
Each time a level is selected, the pattern of the level selected is
displayed.
You can start adjusting from any level, usually you can make it
darker or lighter by adjusting 1 to 5 or 5 to 1.
C
Adjust the brightness with "Brightness Correct.".
When you select level 5, it adjusts to the darkest image from
several projectors.
When you select level 1, it adjusts to the brightest image from
several projectors.
When you select level 2 to 4, it adjusts to the mid-range
brightness image from several projectors.
Each time the [Enter] button is pressed the image displayed
changes between the pattern display and the actual image, and
you can check the adjustment results and make corrections in the
actual image.
q
The screen IDs set here are only effective during "Image
Correction" for "Multi-screen".
If a projector that is not the object of operation reacts to
the remote control, point the remote control at the remote
receiver on that projector and press the number set as that
projector's screen ID while holding down the [Num]
button.
Procedure
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 6100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 6100 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info