214982
67
Zoom out
Zoom in
Previous page
1/100
Next page
65
No images appear (Messages do appear)
Poor image quality (out of focus or distorted)
Check the mode which corresponds to the frequency
of the image signals being output from the computer.
Refer to the documentation provided with your computer
for details on changing the resolution and frequency of the
image signals being output from the computer. (p.86)
Are the cables connected correctly?
(p.17–23)
Does the input signal match the connected source?
Use the [Source] button on the projector's control panel (or
the [Computer] or [S-Video/Video] button on the remote
control) to select the correct signal source. (p.30)
Is the power for the computer or video source turned
on?
(p.29)
If a laptop computer or a computer with a LCD screen
has been connected to the projector, it is necessary to
output the image signals to the projector rather than
to the screen.
Normally image signals are output to only the computer's
LCD screen, so you need to change the output to an
external destination. For some computer models, when the
image signals are output externally, they no longer appear
on the LCD screen. For details, refer to the section of the
documentation provided with your computer under a
heading such as "External output", "Connecting an external
monitor" or similar. (p.30)
Has the focus been adjusted correctly?
(p.37)
Is the lens cover still attached?
Has the front adjustable feet been adjusted so that the
image angle is too big?
If the image angle is too big, the image will be out of focus
vertically. (p.34)
Is the projector at the correct distance?
The recommended distance from the projector to the screen
is within 0.9–11.3 m (2.937.0 ft.). Set up the projector so
that the projection distance is within this range. (p.16)
"Not Supported." is
displayed
"No-Signal." is displayed
The image is fuzzy
Part of the image is
out of focus
The whole image is
out of focus
When the Indicators Provide No Help
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 52 video projector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 52 video projector in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info