500295
60
Zoom out
Zoom in
Previous page
1/95
Next page
Configuration Menu
59
Function Menu/Settings Explanation
Sync.
*2
*3
0 to 31 Adjusts computer images when flickering, fuzzi-
ness, or interference appear in the images.
Adjusting the Brightness, Contrast, or Sharp-
ness may cause flickering or blurriness.
Adjusting the synchronization after adjusting
tracking allows for more accurate adjustments.
Position
*2
*4
Adjusts the display position up, down, left, and
right when a part of the image is missing so that
the whole image is projected.
Progressive
*2
Off, Video, Film/Auto
*1
*5
(This can only be set when receiving signal input
from the Video port or when receiving 480i, 576i,
or 1080i signal input from the Component,
HDMI1, or HDMI2 ports or from WirelessHD.)
Converts the signal from interlaced (i) to pro-
gressive (p) using a method appropriate for the
image signal.
Off: No signal conversion is performed.
Video: This is ideal for viewing general video
images.
Film/Auto: Performs the optimal conversion for
film, CG, or animation input signals.
Motion Detec-
tion
*2
*5
1 to 5 Sets the image motion speed from 1 (slow, for
still images) to 5 (fast, for movies). Change this
setting if you are experiencing poor still image
quality or flickering movies.
Auto Setup
*3
On, Off Sets whether or not to automatically adjust the
image whenever the input signal is changed.
When enabled, the tracking, display position,
and synchronization are automatically config-
ured.
Advanced
2-2 Pull-down
*1
*5
On, Off (This can only be set when receiving 1080p/24
Hz signal input from the Component, HDMI1, or
HDMI2 ports, or from WirelessHD.)
Choose between projections that use 2-2 Pull-
down to interpolate between image frames or
2-3 Pull-down. Set to On for 2-2 Pull-down.
Noise Reduction
*2
*5
Off, 1, 2, 3 Smoothes out rough images. There are three
modes available. Select your favorite setting.
It is recommended that this is set to Off when
viewing image sources in which noise is very low,
such as for DVDs.
Setup Level
*2
*5
0%, 7.5% (This can only be set when receiving an NTSC or
component video signal from the Video port.)
Change this setting when using devices with a
different black level (Setup Level) such as prod-
ucts designed for the Korean market. Check the
specifications for your connected device before
changing this setting.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EH-TW6000W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EH-TW6000W in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EH-TW6000W

Epson EH-TW6000W User Manual - German - 98 pages

Epson EH-TW6000W User Manual - Dutch - 99 pages

Epson EH-TW6000W User Manual - Spanish - 97 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info