500293
89
Zoom out
Zoom in
Previous page
1/95
Next page
User's Guide
Organization of the Guide and Notations in the Guide
1
Using Each Guide
The guides for this projector are organized as shown below.
Safety Instructions/Support and Service Guide
Contains information on using the projector safely, as well as a support and service guide,
troubleshooting check lists, and so on. Make sure you read this guide before using the pro-
jector.
User's Guide (this guide)
Contains information on setting up and basic operations before using the projector, using
the Configuration menu, and handling problems and performing routine maintenance.
Quick Start Guide
Contains information on the procedures for setting up the projector. Read this first.
3D Glasses User's Guide
Contains information on handling the 3D Glasses and warnings and so on.
WirelessHD Transmitter User's Guide
Contains information on handling the WirelessHD Transmitter and warnings and so on.
Organization of the Guide and Notations in the Guide
2
Notations Used in This Guide
Safety Indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
The following shows the symbols and their meanings. Please understand and respect these caution symbols
in order to avoid injury to persons or property.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death
due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical
damage due to incorrect handling.
General Information Indications
Attention
Indicates procedures which may result in damage or malfunctions to occur.
c
Indicates additional information and points which may be useful to know regarding a topic.
s Indicates a page where detailed information regarding a topic can be found.
Menu Name Indicates Configuration menu items.
Example: Image - Color Mode
Button Name Indicates the buttons on the remote control or the control panel.
Example:
button
About the Use of "This Product" or "This Projector"
As well as the main projector unit, supplied items or optional extras may be referred to using the phrase "this
product" or "this projector".
Organization of the Guide and Notations in the Guide
3
Checking Supplied Items
See the following list to check the supplied items.
If anything is missing or damaged, contact the store where you purchased the projector.
Projector Remote control
s
p.13
Power cable AA size alkaline batteries (x2)
s
p.21
3D Glasses Pack
s
p.41
See the documentation supplied with the 3D Glasses
for more information on the 3D Glasses pack.
WirelessHD Transmitter Pack
(EH-TW6000W only)
s
p.53
The HDMI cable is two meters long.
Guides
s
p.1 Cable clamps (x2)
s
p.11
Contents
4
Organization of the Guide and
Notations in the Guide
Using Each Guide ..................... 1
Notations Used in This Guide ........... 2
Safety Indications.......................2
General Information Indications.............2
About the Use of "This Product" or "This Projector"
..................................... 2
Checking Supplied Items .............. 3
Introduction
Projector Features .................... 7
Dynamic 3D Display ...................... 7
Selecting Modes to Match what you are
Watching (Color Mode) ................... 7
Absolute Color Adjustment................7
Conforms to Wireless Transmissions for the
WirelessHD Standards (EH-TW6000W only) . . . . . 8
Other Useful Functions .................... 8
Part Names and Functions ............. 9
Front/Top ............................. 9
Control Panel .......................... 10
Rear ................................ 11
Base ................................ 12
Remote Control ........................ 13
Appearance ......................... 15
Preparing
Setting Up .......................... 16
Various Projection Methods ...............16
Adjusting the Projection Size..............17
Connecting to Devices ............... 18
Connecting to Video Equipment ............ 18
Connecting to a Computer ................ 19
Connecting an HDMI Cable Clamp ........... 19
Connecting to External Devices ............. 19
Connecting USB devices ................19
Connecting WirelessHD devices (EH-
TW6000W only) ...................... 20
Preparing the Remote Control ........ 21
Installing the Remote Control Batteries.......21
Remote Control Operating Range ...........21
Operating range (left to right) ............21
Operating range (top to bottom) .......... 21
Basic Operations
Starting and Ending Projection ....... 22
Turning on the Projector and Projecting . . . . . . 22
If the Target Image is not Projected .......... 23
Turning off the Power .................... 23
Adjusting the Projection Screen ....... 25
Displaying the Test Pattern ................ 25
Focus Adjustment ......................25
Adjusting the Projection Size (Zoom
Adjustment) ..........................25
Adjusting the Projector's Tilt ...............26
Correcting Keystone Distortion ............. 26
Correct automatically (Auto V-Keystone) . . . . 26
Correct manually (H-Keystone adjuster) . . . . . 26
Correct manually (H/V-Keystone) .......... 27
Adjusting the Volume .................... 28
Hiding the Image and Sound Temporarily (A/V
Mute) ...............................28
Adjusting the Image
Basic Settings for Image .............. 29
Selecting the Projection Quality (Color Mode)
....................................29
Adjusting the Image's Aspect Ratio (Aspect) . . . . 30
Absolute Color Adjustments .......... 32
Adjusting Hue, Saturation, and Brightness . . . . . 32
Adjusting the Gamma ...................33
Select and adjust the correction value......33
Adjust while viewing the image..........33
Adjust using the gamma adjustment graph
.................................. 34
Adjusting the RGB (Offset/Gain)............34
Abs. Color Temp. ....................... 34
Skin Tone ............................35
Detailed Image Adjustments .......... 36
Adjusting the Sharpness .................. 36
Contents
5
Setting Auto Iris ........................ 36
Viewing the Image at the Saved Image
Quality (Memory Function) . . . . . . . . . . . 38
Saving Function ........................ 38
Saving a Memory ....................... 38
Loading a Memory ......................39
Erasing a Memory ......................39
Renaming a Memory .................... 39
Useful Functions
Enjoying 3D Images .................. 41
Watching 3D Images ....................41
Using 3D Glasses ..................... 41
Projecting 3D images .................. 42
Viewing Area for 3D Images ............... 43
Warnings Regarding Viewing 3D Images......43
Changing Between Two Types of
Images .............................. 47
Split Screen ...........................47
Projecting on a Split Screen...............47
Starting split screen display.............47
Changing the split screen settings ......... 48
HDMI Link ........................... 49
HDMI Link Function ..................... 49
HDMI Link Settings ...................... 49
Enabling HDMI Link ................... 49
Checking for connected devices..........50
Playing Back Image Data (Slideshow)
...................................... 51
Compatible Data ....................... 51
Playing a Slideshow ..................... 51
Display Settings for Image Files and Slideshow
Operation Settings ...................... 52
Connecting with WirelessHD (EH-
TW6000W Only) ..................... 53
Installing and Connecting the WirelessHD
Transmitter ........................... 53
WirelessHD Settings ..................... 53
Changing the source ..................53
Reconnecting .......................54
WirelessHD settings menu..............54
WirelessHD Transmission Range............55
Configuration Menu
Configuration Menu Functions ........ 56
Configuration Menu Operations............56
Configuration Menu Table................57
Image menu ........................57
Signal menu ........................ 58
Settings menu ....................... 61
Extended menu ...................... 63
Memory menu ....................... 64
Info menu .......................... 65
Reset menu ......................... 65
Split Screen menu .................... 66
Troubleshooting
Problem Solving . .................... 67
Reading the Indicators ................... 67
Indicator status during an error/warning....67
Indicator status during normal operation . . . . 68
When the Indicators Provide No Help........69
Check the problem .................... 69
Problems relating to images ............. 70
Problems when projection starts ..........74
Problems with the remote control ......... 74
Problems with 3D .................... 74
Problems with HDMI ..................75
Problems with WirelessHD (EH-TW6000W
only) ..............................75
Problems with USB storage devices ........ 76
Maintenance
Maintenance ........................ 77
Cleaning the Parts ...................... 77
Cleaning the air filter .................. 77
Cleaning the main unit ................. 78
Cleaning the lens ..................... 79
Cleaning the 3D Glasses ................ 79
Replacement Periods for Consumables.......79
Air filter replacement period ............. 79
Contents
6
Lamp replacement period.............. 79
Replacing Consumables .................. 80
Replacing the air filter .................80
Replacing the lamp ...................81
Resetting lamp hours ..................82
Appendix
Optional Accessories and
Consumables ........................ 84
Optional Items ......................... 84
Consumables .......................... 84
Supported Resolutions ............... 85
Component Video ...................... 85
Composite Video ....................... 85
Computer Signals (Analog RGB)............85
HDMI1/HDMI2 Input Signal ................ 86
3D Input Signal ........................ 86
WirelessHD Input Signal .................. 86
Specifications ....................... 87
Glossary ............................ 90
General Notes ....................... 91
General Notice ......................... 91
Introduction
7
Projector Features
Dynamic 3D Display
Enjoy 3D contents on Blu-ray and images filmed with a 3D camera through a stunning projection display.
s
p.41
You need 3D Glasses to view 3D images.
s
p.41
Selecting Modes to Match what you are Watching (Color Mode)
By simply selecting the Color Mode, you can project the optimum image to suit your surroundings.
s
p.29
Setting Example
Living Room
For use in a bright room
Cinema
For movies and concerts in a dark room
Absolute Color Adjustment
As well as using Color Mode, you can also adjust the absolute color temperature of the image and skin tones
to suit your taste.
s
p.34
What's more, you can obtain colors that match the image and achieve the colors you want through a
combination of gamma adjustment, RGB offset or gain adjustment for each color, and hue, saturation, and
brightness adjustment for each RGBCMY color.
s
p.32
Introduction
8
Conforms to Wireless Transmissions for the WirelessHD Standards (EH-TW6000W
only)
The projector can wirelessly receive data and control signals for images and audio from WirelessHD
compatible devices. Because devices do not need to be connected directly to the projector via a cable, they
can be setup wherever you like.
s
p.53
Projector Transmitter Player
Other Useful Functions
In addition, the following useful functions are provided.
The remote control contains a backlight function allowing for easy use even in dark rooms. Operations are also
simplified by only pressing the
button. s p.13
Audio is played back via the built-in speaker eliminating the need for external speakers. The Inverse Audio function
also allows you to switch the left and right audio streams when the projector is suspended from a ceiling.
s p.61
You can view slideshows by simply connecting a USB device to the projector. When a digital camera is connected,
you can view the photos on the camera using Slideshow.
s p.51
The H-Keystone slider allows you to quickly correct keystone distortion when the projector cannot be setup directly
in front of the screen. Because it is a slider, you can make corrections intuitively.
s p.26
Introduction
9
Part Names and Functions
Front/Top
Name Function
a
Lamp cover
Open when replacing the projector's lamp. s p.81
b
Air exhaust vent
Exhaust vent for air used to cool the projector internally.
Caution
While projecting, do not put your face or hands near the air exhaust vent,
and do not place objects that may become warped or damaged by heat near
the vent.
c
Remote receiver
Receives signals from the remote control. s p.21
d
Projector's lens
Images are projected from here.
e
Lens cover
Install when not using the projector to protect the lens from being scratched or
soiled.
s p.22
f
Air intake vent
Intake vent for air used to cool the projector internally.
g
Front adjustable foot
When setup on a surface such as a table, extend the foot to adjust the horizontal
tilt.
s p.26
h
Air filter cover
When cleaning or replacing the air filter, open this cover and remove the air filter.
s p.77, p.80
i
Focus ring
Adjusts the image focus. s p.25
j
Zoom ring
Adjusts the image size. s p.25
k
H-Keystone slider
Performs horizontal keystone correction. s p.26
l
Control panel
Control panel on the projector. s p.10
Introduction
10
Control Panel
Buttons/Indicators Function
a
Brightness sensor
Detects the brightness of the room. When Color Mode is set to "Auto", the
optimum image quality is set according to the brightness detected by the sen-
sor.
s p.29
b
Operation indicator
Flashes to indicate warm-up in progress or cool-down in progress. Shows the
projector's status through a combination of other indicators lit and flashing.
s p.67
c
Turns the projector power on or off. s p.22
Lit when the projector is on.
s p.68
d
Changes to the image from each input port. s p.23
e
Flashes orange when it is time to replace the lamp. Shows the projector's errors
through a combination of other indicators lit and flashing.
s p.67
f
Flashes orange if the internal temperature is too high. Shows the projector's
errors through a combination of other indicators lit and flashing.
s p.67
g
Select the adjustment value for the volume and for menu items. s p.28
Performs horizontal keystone correction when the Keystone screen is dis-
played.
s p.27
h
Select the adjustment value for the keystone correction and for menu items.
s p.27
i
Return to the previous menu level when a menu is displayed. s p.56
j
Select functions and settings when a menu is displayed. s p.56
k
Displays and closes the configuration menu.
On the configuration menu, you can make adjustments and settings for Signal,
Image, Input Signal, and so on.
s p.56
Introduction
11
Rear
Name Function
a
Speaker
The projector's built-in speaker. Outputs audio.
Set Inverse Audio to On to use the built-in speaker when the projector is
suspended from a ceiling.
s Settings - Audio - Inverse Audio p.61
b
Power inlet
Connects the power cable. s p.22
c
Remote receiver
Receives signals from the remote control. s p.21
d
External 3D IR port
Connects the optional External 3D IR emitter. s p.43
e
RS-232C port
When controlling the projector, connect the projector to a computer with an
RS-232C cable. This port is for control use and should not normally be used.
s p.87
f
PC port
Connects to the RGB output port on a computer. s p.19
g
Component port
Connects to the component (YCbCr or YPbPr) output port on video equip-
ment.
s p.18
h
Audio (L-R) port
Inputs audio from equipment connected to the Video port, Component port,
or the PC port.
s p.18
i
Video port
Connects to the composite video output port on video equipment. s p.18
j
USB port
Connects USB devices such as a USB memory device or a digital camera, and
projects images as a slideshow.
s p.19
k
Cable holder
Thick HDMI cables with a large outer diameter and so on, may disconnect
easily due to the weight of the cable. To prevent the cable from disconnecting,
fix it in place using the HDMI cable clamp supplied.
s p.19
l
HDMI2 port
Connects HDMI compatible video equipment and computers. s p.18
m
HDMI1 port
Introduction
12
Base
Name Function
a
Ceiling mount fixing
points (four points)
Attach the optional ceiling mount here when suspending the projector from a
ceiling.
s p.84
b
Front adjustable foot
When setup on a surface such as a table, extend the foot to adjust the height.
s p.26
Introduction
13
Remote Control
Button Function
a
Turns the projector on. s p.22
b
Turns the projector off. s p.23
c
The remote control buttons light up for ap-
proximately 10 seconds. This is useful when
operating the remote control in the dark.
d
Changes to the image from each input port.
s p.23
The
button is only available for EH-
TW6000W.
e
This button displays the settings menu for
HDMI Link.
With the other buttons, you can then start or
stop playback, adjust the volume, and so on
for connected equipment that meets the
HDMI CEC standards.
s p.49
f
Adjusts the volume. s p.28
g
Changes between 2D and 3D. s p.42
h
Changes the Color Mode. s p.29
i
Saves, loads, or erases a memory. s p.38
j
Selects menu items and adjustment values.
s p.56
k
When a menu is displayed, it accepts and en-
ters the current selection and moves to the
next level.
s p.56
l
The adjustment value returns to its default
value when pressed while the menu's adjust-
ment screen is displayed.
s p.56
Introduction
14
Button Function
m
Displays and closes the configuration menu.
On the configuration menu, you can make
adjustments and settings for Signal, Image,
Input Signal, and so on.
s p.56
n
Return to the previous menu level when a
menu is displayed.
s p.56
o
Sets Auto Iris. s p.36
p
Adjusts the hue, saturation, and brightness
for each RGBCMY color.
s p.32
q
Selects the aspect mode according to the in-
put signal.
s p.30
r
Splits the screen in two and projects two im-
age sources simultaneously.
s p.47
s
Displays and closes the test pattern. s p.25
t
Performs the function assigned to the user
button.
s p.61
A
Turns the video and audio on or off. s p.28
Introduction
15
Appearance
Units: mm
aCenter of lens
b Distance from center of lens to suspension bracket fixing point
Preparing
16
Setting Up
Various Projection Methods
Warning
A special method of installation is required when suspending the projector from a ceiling (ceiling mount). If
it is not installed correctly, it could fall causing an accident and injury.
If you use adhesives, lubricants, or oil on ceiling mount fixing points to prevent screws from loosening, or if
you use things such as lubricants or oils on the projector, the projector case may crack causing it to fall from
its ceiling mount. This could cause serious injury to anyone under the projector and also damage the projector.
Attention
Do not setup the projector on its side. This may cause malfunctions to occur.
Try not to setup the projector in locations subject to high humidity and dust, or in locations subject to smoke
from fires or tobacco smoke.
Clean the air filter once every three months. Clean it more often if the environment is particularly dusty.
s p.80
Placing on a table and so on and projecting Suspending from the ceiling and projecting
c
When projecting from a ceiling, change Projection to a ceiling setting. s Settings - Projection p.61
Set Inverse Audio to On to use the built-in speaker when the projector is suspended from a ceiling.
s Settings - Audio - Inverse Audio p.61
When the projector cannot be setup directly in front of the screen, you can correct keystone distortion
with the H-Keystone slider.
s p.26
Preparing
17
Adjusting the Projection Size
The size of the projection increases as the projector is moved away from the screen.
Use the table below to setup the projector at the optimum position from the screen. The values given here
are for your reference only.
B Distance from the center of the lens to the base of the projection screen
Unit: cm
16:9 Screen Size Projection Distance (C) Distance (B)
A W x H Minimum (Wide) Maximum (Tele)
40" 89 x 50 116 190 0
60" 130 x 75 176 287 0
80" 180 x 100 235 383 0
100" 220 x 120 295 480 0
120" 270 x 150 354 576 0
150" 330 x 190 444 721 1
180" 440 x 250 533 866 1
Unit: cm
4:3 Screen Size Projection Distance (C) Distance (B)
A W x H Minimum (Wide) Maximum (Tele)
40" 81 x 61 143 233 0
60" 120 x 90 216 352 0
80" 160 x 120 289 470 0
100" 200 x 150 361 588 0
120" 240 x 180 434 706 1
150" 300 x 230 544 883 1
200" 410 x 300 726 1179 1
Preparing
18
Connecting to Devices
Attention
Turn off the equipment you want to connect before connecting. If the equipment is on when you connect,
it could cause a malfunction.
Check the shape of the cable's connector and the shape of the port, and then connect. If you force a connector
of a different shape into the port, it could cause damage and a malfunction to occur.
Connecting to Video Equipment
To project images from DVD players or VHS video and so on, connect to the projector using one of the
following methods.
When using an HDMI cable
Fix the HDMI cable in place using the HDMI cable clamp. s p.19
When using a video cable
When using a component video cable
c
The cable differs depending on the output signal from the connected video equipment.
Some types of video equipment are capable of outputting different types of signals. Check the user's
guide supplied with the video equipment to confirm which signals can be output.
Preparing
20
Attention
If you use a USB hub, the connection may not operate correctly. Devices such as digital cameras and USB
devices should be connected to the projector directly.
Connect a digital camera using a USB cable specified for use with the device.
Use a USB cable less than 3 m in length. If the cable exceeds 3 m, slideshow may not function correctly.
Connecting WirelessHD devices (EH-TW6000W only)
The projector receives transmissions from the WirelessHD Transmitter, and projects the images.
s
p.53
Change the projected image by pressing the
button on the remote control or the button on the
control panel.
c
When receiving WirelessHD images, make sure WirelessHD is set to On. s Settings -
WirelessHD p.61
You can change which device is displayed by selecting a device from Device Connections in HDMI
Link.
s HDMI Link-Device Connections p.50
Preparing
21
Preparing the Remote Control
Installing the Remote Control Batteries
Attention
Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted the
correct way.
You cannot use other batteries except for the AA size manganese or alkaline.
a
Remove the battery cover.
While pushing the battery compartment
cover catch, lift the cover up.
b
Replace the old batteries with new
batteries.
Check the polarity of the batteries (+ and -)
before installing.
c
Reattach the battery cover.
Press the cover until it clicks into place.
c
If delays in the responsiveness of the
remote control occur or if it does not
operate, it probably means that the
batteries are becoming flat. When this
happens, replace them with new
batteries. Have two AA size manganese
or alkaline batteries ready.
Remote Control Operating Range
Operating range (left to right) Operating range (top to bottom)
Basic Operations
22
Starting and Ending Projection
Turning on the Projector and Projecting
a
Connect the power cable.
Connect using the power cable supplied.
b
Remove the lens cover.
c
Turn on the connected equipment.
d
Turn the power on.
Remote control Control panel
c
When Direct Power On is set to
On, you can start projecting by
simply connecting the power
cable to the projector without
having to press any buttons.
s
Extended - Operation - Direct
Power On p.63
Warning
Do not look into the lens during projection.
c
This projector provides a Child Lock function to prevent children from accidentally turning the power
on and a Control Panel Lock function to prevent accidental operations and so on.
s Settings - Child
Lock/Control Panel Lock p.61
When using at an altitude of 1500 m or more, set High Altitude Mode to On. s Extended - Operation -
High Altitude Mode p.63
This projector provides an Auto Setup function to automatically select the optimum settings when the
input signal for the connected computer image changes.
s Signal - Auto Setup p.58
Do not attach the lens cover during projection.
Basic Operations
23
If the Target Image is not Projected
If the image is not projected, you can change the source using one of the following methods.
Remote control Control panel
Press the button for the target port.
Press the
button and select the target port.
Press the
button to confirm the selection.
c
For video equipment, start playback first and then change the source.
If the projector is suspended from a ceiling, after removing the lens cap, make sure you keep it in a safe
place as you will need to attach it when transporting the projector.
If the color looks unnatural when changing to a Video or Component source, check that the port you
have connected to is the same as the Input Signal.
s Extended - Input Signal - Video Signal/
Component p.63
Turning off the Power
a
Turn off the connected equipment.
b
Press the button on the remote
control or the projector's control
panel.
Remote control Control panel
A confirmation message is displayed.
c
Press the button again.
c
When Standby Confirmation is
set to Off, you can turn off the
projector by pressing the
button on the remote control
once.
s
Extended - Display -
Standby Confirmation p.63
d
Wait until cool-down is complete.
The operation indicator on the projector's
control panel stops flashing.
e
Disconnect the power cable.
c
If the power cable is connected,
some electricity is consumed even
if no operations are made.
Basic Operations
24
f
Reattach the lens cover.
Basic Operations
25
Adjusting the Projection Screen
Displaying the Test Pattern
When adjusting the zoom/focus or the projection position just after setting up the projector, you can display
a test pattern instead of connecting video equipment.
Press the
button on the remote control to display the test pattern.
Press the button to close the test pattern, or select Exit.
Focus Adjustment
Turn the focus ring to adjust the focus.
Adjusting the Projection Size (Zoom Adjustment)
Turn the zoom ring to adjust the size of the projected screen.
Basic Operations
26
Adjusting the Projector's Tilt
If the projection screen is tilted (the left and right sides of the projector are at different heights) when the
projector is setup on a table, adjust the front foot so that both sides are level with each other.
Correcting Keystone Distortion
You can correct keystone distortion using one of the following methods.
Correct automatically Auto V-Keystone Automatically correct vertical keystone distortion.
Correct manually H-Keystone Adjuster Correct horizontal keystone distortion with the H-Keystone
slider.
H/V-Keystone Manually correct distortion in the horizontal and vertical di-
rections independently.
The projected screen becomes smaller when correcting keystone distortion. Increase the projection distance
to fit the projected screen to the screen size.
Correct automatically (Auto V-Keystone)
If the the projector detects movement during installation, vertical keystone distortion is corrected
automatically. If the projector detects movement after it has been left in the same position for two seconds
or more, the adjustment screen is displayed allowing you to make corrections.
Auto V-Keystone can make effective corrections within a projection angle of 30° top to bottom.
c
Auto V-Keystone only functions when Front is selected as the Projection mode. s Settings -
Projection p.61
If you do not want to use the Auto V-Keystone function, set Auto V-Keystone to Off. s Settings -
Keystone - Auto V-Keystone p.61
Correct manually (H-Keystone adjuster)
Move the H-Keystone Slider to the right or left to perform horizontal keystone correction.
Basic Operations
27
You can make effective corrections within a projection angle of 30° left to right.
c
If you want to use the H-Keystone Adjuster, set H-Keystone Adjuster to On.
s
Settings - Keystone -
H-Keystone Adjuster p.61
Correct manually (H/V-Keystone)
You can use the buttons on the control panel to correct keystone distortion.
Press the
buttons to display the V-Keystone/H-Keystone gauges.
When the gauges are displayed, press the
buttons to perform vertical correction, and press the
buttons to perform horizontal correction.
When the top or bottom is too wide
When the left or right is too wide
c
You can adjust the volume by pressing the buttons when the gauges are not displayed.
s p.28
You can set H/V-Keystone from the configuration menu. s Settings - Keystone - H/V-Keystone - V-
Keystone/H-Keystone p.61
You can make effective corrections within a projection angle of 30° top to bottom and left to right.
Basic Operations
28
Adjusting the Volume
You can adjust the volume by using the buttons on the remote control or the buttons on
the projector's control panel.
Remote control Control panel
c
You can also adjust the volume from the configuration menu. s Settings - Audio p.61
Under normal conditions, you can adjust the volume of the projector's built-in speaker. However, by
connecting an AV system to the projector and setting HDMI Link to On and Audio Out Device to AV
System, you can adjust the AV system's volume when projecting from HDMI1, HDMI2, and
WirelessHD sources.
s p.49
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so
that you can gradually increase the volume when you next turn on the power.
Hiding the Image and Sound Temporarily (A/V Mute)
You can use this to temporarily hide the image on the screen.
Each time you press the
button, A/V Mute turns on or off.
c
If you use this function when projecting moving images, the images and sound continue to be played
back by the source, and you cannot return to the point where A/V Mute was activated.
Adjusting the Image
30
Choices when projecting 2D images
Mode Application
Auto
Sets the color mode automatically according to the surroundings.
Dynamic
Ideal for use in a bright room. This is the brightest mode, and reproduces shadow tones
well.
Living Room
Ideal for use in a bright room. Images are clear and sharp.
Natural
Ideal for use in a dark room. We recommend performing color adjustment in this mode.
s p.7
Cinema
Ideal for watching movies and concerts in a dark room.
Choices when projecting 3D images
Mode Application
3D Dynamic
For use when projecting 3D images. Images are bright and sharper than 3D Cinema.
3D Cinema
For use when projecting 3D images.
Adjusting the Image's Aspect Ratio (Aspect)
You can change the input signal's type, aspect ratio, and resolution to match the Aspect of the projection
screen.
The available Aspect varies depending on the image signal currently being projected.
a
Press the button.
c
You can make settings from the
configuration menu.
s
Signal -
Aspect p.58
b
Use the buttons to
select the setting name, and then
press the
button to confirm the
selection.
c
Aspect may not be available
depending on the type of signal.
By normally selecting Auto, the optimum aspect is used to display the input signal. Change the setting if you
want to use a different aspect.
Adjusting the Image
31
Aspect Ratio of In-
put Image
Setting Name (Aspect Ratio)
Normal Full Zoom Wide
4:3 Images
16:9 Images and
Images Recorded
Using Squeeze
Letterbox Im-
ages
*1*2
Notes
Matches the vertical
size of the projection
panel. The aspect ra-
tio differs depend-
ing on the input im-
age.
Uses the entire pro-
jection panel.
Retains the aspect
ratio of the input sig-
nal, and matches the
horizontal size of the
projection panel.
The top and bottom
of the image may be
truncated.
Displays the vertical
and horizontal at the
maximum. Both of
the horizontal ends
are enlarged.
*1
When Zoom is set, subtitles and so on may not be displayed. If this happens, try adjusting Zoom Caption Pos.
s Signal - Zoom Caption Pos. p.58
*2
The letterbox image used in this explanation is a 4:3 aspect ratio image displayed in 16:9 with black margins at
the top and bottom for subtitle placement. The margins at the top and bottom of the screen image are used
for subtitles.
c
Images for the HDMI connection are displayed using the same resolution as the original image source.
Note that using the aspect ratio function of the projector to reduce, enlarge, or split the projected
image for commercial purposes or for public viewing may infringe upon the rights of the copyright
holder of that image based on copyright law.
Adjusting the Image
33
Adjusting the Gamma
You can adjust slight coloration differences that may occur due to the device being used when the image is
displayed.
You can use one of the following three methods selected from the configuration menu.
Setting Method Menu Settings
Select and adjust the correc-
tion value
Image - Advanced - Gamma
Adjust while viewing the im-
age
Image - Advanced - Gamma - Customized - Adjust it from the image
Adjust using the gamma ad-
justment graph
Image - Advanced - Gamma - Customized - Adjust it from the graph
Select and adjust the correction value
Select the adjustment value, and then press the button
to confirm the selection.
The smaller the value, the lighter the dark portions of the
image become, but bright areas may appear discolored. The
upper part of the gamma adjustment graph becomes roun-
ded.
When a large value is entered, bright parts of the image be-
come dark. The lower part of the gamma adjustment graph
becomes rounded.
c
The horizontal axis of the gamma adjustment graph shows the input signal level, and the vertical axis
shows the output signal level.
Press the button to return the adjustments to their default values.
Adjust while viewing the image
Make adjustments while viewing the image being projected.
a
Move the gamma icon displayed on
the image being projected to the area
for which you want to adjust the
brightness, and then press the
button.
The gamma adjustment graph is displayed.
b
Use the buttons to
adjust the brightness, and then press
the
button to confirm the
selection.
Adjusting the Image
34
Adjust using the gamma adjustment graph
Make adjustments while viewing the gamma adjustment graph for the image being projected.
a
Use the buttons to select the
part you want to adjust from the
graph.
b
Use the buttons to
adjust the brightness, and then press
the
button to confirm the
selection.
Adjusting the RGB (Offset/Gain)
For the image's brightness, you can adjust the dark areas (Offset) and the bright areas (Gain) for R (red), G
(green), and B (blue). The image becomes brighter when moved to the right (positive) and darker when moved
to the left (negative).
Offset
When the image is made brighter, shading for the darker sections is more vividly expressed.
When the image is made darker, the image appears more full-bodied but shading for the
darker sections is harder to distinguish.
Gain
When the image is made brighter, the bright sections become whiter and shading is lost.
When the image is made darker, shading for the bright sections is more vividly expressed.
The menu is displayed in the following order.
Image - Advanced - RGB
Use the
buttons to select the item, and then
use the
buttons to make the adjustments.
c
Press the button to return the adjustments to their default values.
Abs. Color Temp.
You can adjust the overall tint of the image. Make adjustments if the image is a little too blue or too red and
so on.
The menu is displayed in the following order.
Image - Abs. Color Temp.
Use the
buttons to make adjustments.
Blue tints grow stronger as the value is increased, and red
tints grow stronger as the value is reduced.
Adjusting the Image
35
c
Press the button to return the adjustments to their default values.
Skin Tone
You can adjust the skin tone. Make adjustments if the skin tone is too red or too green and so on.
The menu is displayed in the following order.
Image - Skin Tone
Use the
buttons to make adjustments.
The image becomes greener when set to the right (positive)
and redder when set to the left (negative).
c
Press the button to return the adjustments to their default values.
Adjusting the Image
36
Detailed Image Adjustments
Adjusting the Sharpness
You can make the image clearer.
It cannot be adjusted when a computer image signal is being input.
Thin Line Enhancement
Details such as hair and patterns on clothing are enhanced.
Thick Line Enhancement
Rough parts such as outlines for entire subjects or the background are enhanced,
making the overall image clearer.
Vert. Line Enhancement
Horiz. Line Enhancement
The horizontal and vertical directions for images are enhanced.
a
Press the button.
Remote control Control panel
The configuration menu is displayed.
b
Select Image - Sharpness.
The Sharpness adjustment screen is
displayed.
c
Select Advanced at the top right of
the screen, and then press the
button to confirm the selection.
The Advanced adjustment screen is
displayed.
d
Use the buttons to
select the item, and then use the
buttons to make the adjustments.
The image is enhanced when moved to the
right (positive) and softer when moved to
the left (negative).
The upper bar adjusts high and low areas
simultaneously.
Press the
button to return the
adjustments to their default values.
e
Press the button to close the
menu.
Setting Auto Iris
By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy
deep and rich images.
You can select the luminance adjustment tracking for changes in brightness in the displayed image from
Normal to High Speed.
(Depending on the image, you may hear the auto iris operating, but this is not a malfunction. )
Adjusting the Image
38
Viewing the Image at the Saved Image Quality
(Memory Function)
Saving Function
You can save the adjustment values for some images and image quality settings in the configuration menu
for later use (Save Memory).
Because these saved adjustment values can be loaded from the remote control, you can easily switch to your
preferred image quality (Load Memory).
The following configuration menu functions can be saved.
Image
s
p.57
Color Mode, Power Consumption, Brightness, Contrast, Color Saturation, Tint, Sharpness,
Abs. Color Temp., Skin Tone, Advanced-Sharpness, Offset, Gain, Gamma, Hue, Saturation,
Brightness, Auto Iris
Signal
s
p.58
Progressive, 2-2 Pull-down, Motion Detection
Advanced Noise Reduction, Setup Level, EPSON Super White, Overscan, HDMI Video
Range
Saving a Memory
You can register a memory when Color Mode is set to anything except Auto.
a
Make settings that you want to save to
the configuration menu.
b
Press the button.
c
Use the buttons to
select Save Memory, and then press
the
button to confirm the
selection.
The Save Memory screen is displayed.
d
Use the buttons to
select the memory name to be saved,
and then press the
button to
confirm the selection.
The current projector settings are saved to
the memory.
When the mark to the left of the memory
name turns green, saving is complete. If you
select a memory name that has already
been used, a message is displayed asking if
you want to overwrite the data. If you select
Yes, the previous content is erased and the
current settings are saved.
Adjusting the Image
39
Loading a Memory
a
Press the button, and then select Load Memory.
The Load Memory screen is displayed.
b
Select the target memory name.
c
The color mode saved to the memory is displayed on the right.
Depending on the input signal, part of the loaded memory item may not be applied to the
projected image.
Memories saved for 2D images can only be loaded when projecting 2D images. Memories saved
for 3D images can only be loaded when projecting 3D images.
Erasing a Memory
a
Press the button, and then select Erase Memory.
The Erase Memory screen is displayed.
b
Select the target memory name.
A confirmation message is displayed. If you select Yes, the content of the saved memory is erased.
c
If you want to erase all of the saved memories, go to Reset - Reset Memory on the
configuration menu.
s
p.65
Renaming a Memory
You can rename each memory name using up to 12 characters. Giving the memory a name that is easy to
remember is useful when loading the memory.
a
Press the button, and then select Rename Memory.
The Rename Memory screen is displayed.
b
Select the target memory name.
The name list screen is displayed.
c
Select a displayed name or Customized.
To enter a name of your own, select Customized, and then go to step 4. If you select Customized, a
keyboard is displayed.
If you select from the name list, check that the memory name has been changed.
Adjusting the Image
40
d
Enter a name.
Use the buttons to select a
character, and then press the
button to con-
firm the selection. Enter up to 12 characters.
When you have finished entering the name, se-
lect Finish.
The memory name is changed.
Useful Functions
41
Enjoying 3D Images
Watching 3D Images
When 3D data is received from the HDMI1, HDMI2, or WirelessHD (EH-TW6000W only) source, the image is
automatically projected in 3D.
The following 3D formats are supported.
Frame Packing
Side by Side
Top and Bottom
Using 3D Glasses
Use the supplied or optional 3D Glasses (ELPGS01) to view 3D images.
3D Glasses are not supplied with EH-TW5900.
c
When you first remove your 3D Glasses from their packaging, they may be protected by protective
stickers and tape. Remove the protective stickers and tape.
a
Hold down the [On] button for at least
one second to turn on the 3D Glasses.
The indicator turns on for five seconds, and
then turns off.
b
Put on the 3D Glasses and enjoy the
show.
c
When finished, press the [On]
button for at least one second to
turn off the power.
You need more pairs of optional
3D Glasses if more than one
person will be viewing the 3D
image.
s p.84
Useful Functions
42
Projecting 3D images
a
Connect an AV device capable of
playing 3D images to the projector.
b
Turn on the AV device and the
projector, and then press the
button.
If the 3D image is projected automatically,
you do not need to press any buttons.
c
How a 3D image is perceived varies depending on the individual.
The image is not displayed in 3D if 3D Display is set to Off. Press the button on the remote
control.
s Signal - 3D Setup - 3D Display p.58
The projector automatically selects the appropriate 3D format, but if the 3D image is not displayed
correctly, use 3D Format to select another format.
s Signal - 3D Setup - 3D Format p.58
If the 3D effect is not displayed correctly, try reversing using Inverse 3D Glasses. s Signal - 3D
Setup - Inverse 3D Glasses p.58
When using the optional External 3D IR emitter, connect the cable to the rear of the projector, and
then set 3D IR Emitter to External.
s Signal - 3D Setup - 3D IR Emitter p.58
When a 3D image is displayed, a warning about viewing 3D images is displayed. You can turn off this
warning by setting 3D Viewing Notice to Off.
s Signal - 3D Setup - 3D Viewing Notice p.58
During 3D projection, the following configuration menu functions cannot be changed.
Aspect (set to Normal), Noise Reduction (set to Off), Sharpness, Split Screen, Overscan (set to Off)
How the 3D image is viewed may change depending on the temperature of the surroundings and how
long the lamp has been used. Refrain from using the projector if the image is not projected normally.
3D images may not be displayed correctly if they are being affected by other infrared communication
devices.
Useful Functions
43
Viewing Area for 3D Images
The projector is equipped with an internal 3D emitter that synchronizes with your 3D Glasses to view 3D
images. This allows you to view 3D images within the range shown in the figure below.
Use the optional External 3D IR emitter if you cannot view the 3D image normally or if you are in a particularly
spacious room.
s
p.84
AScreen
BProjector
c Distance from the projector to the screen
Viewing distance when using the projector's built-in 3D emitter
5 m
d Viewing width 4 m
e Viewing angle 60°
f Distance from the screen (viewing is not possible) 0.3 m
c
If there are AV devices such as Blu-ray Disc players near the screen, signals from the projector's 3D
emitter may effect operations for the AV devices. Please setup the AV device further away from the
screen.
Do not stick anything that will block the signal onto the front of the 3D Glasses.
Connect the optional External 3D IR emitter to the External 3D IR port on the rear of the projector with
a LAN cable, and install it at the base of the screen, near the center.
The viewing range for the optional External 3D IR emitter is 10 m.
The 3D Glasses for this projector utilize 3D Active Shutter Eyewear Technology developed by the
Panasonic Corporation and X6D Ltd.
Warnings Regarding Viewing 3D Images
Note the following important points when viewing 3D images.
Warning
Do not disassemble or remodel the 3D Glasses.
This could cause a fire to occur or the images to appear abnormal when viewing, causing you to feel unwell.
Do not install the lithium coin batteries with their polarities (plus and minus) inversed.
If the batteries are inversed by mistake, they could explode or leak, causing a fire, injury, or damage the
surroundings. Follow the instructions to install the batteries correctly.
Do not leave the batteries or the supplied nose pad within reach of children.
They could be accidentally swallowed. If anything is accidentally swallowed, contact a doctor immediately.
Useful Functions
44
Caution
About the 3D Glasses
Do not drop or press too forcefully on the 3D Glasses.
If the glass sections and so on are broken, an injury could occur. Store the glasses in the soft glasses case
supplied.
Be careful of the edges of the frame when wearing the 3D Glasses.
If it pokes your eye and so on, an injury could occur.
Do not place your finger in any of the moving sections (such as the hinges) of the 3D Glasses.
Otherwise an injury could occur.
Caution
About Wearing 3D Glasses
Make sure you wear the 3D Glasses correctly.
Do not wear the 3D Glasses upside down.
If the image is not displayed correctly into the right and left eyes, it could cause you to feel unwell.
Do not wear the glasses unless you are viewing a 3D image.
How a 3D image is perceived varies depending on the individual. Stop using the 3D function if you feel strange
or cannot see in 3D.
Continuing to view the 3D images could cause you to feel unwell.
Stop wearing the 3D Glasses immediately if they seem abnormal or a malfunction occurs.
Continuing to wear the 3D Glasses could cause an injury or cause you to feel unwell.
Stop wearing the 3D Glasses if your ears, nose, or temples become red, painful, or itchy.
Continuing to wear the 3D Glasses could cause you to feel unwell.
Stop wearing the 3D Glasses if your skin feels unusual when wearing the glasses.
In some very rare cases the paint or materials used in the 3D Glasses could cause an allergic reaction.
Caution
Viewing Time
When viewing 3D images, always take periodic breaks during extended viewing.
Long periods of viewing 3D images may cause eye fatigue.
The amount of time and frequency of such breaks varies from person to person. If your eyes still feel tired or
uncomfortable even after taking a break from viewing, stop viewing immediately.
Useful Functions
45
Caution
Watching 3D Images
If your eyes feel fatigued or uncomfortable when viewing 3D images, stop viewing immediately.
Continuing to view the 3D images could cause you to feel unwell.
When viewing 3D images be sure to always wear 3D Glasses. Do not attempt to view 3D images without 3D
Glasses.
Doing so could cause you to feel unwell.
Do not place any breakable or fragile objects around you when using 3D Glasses.
3D images may cause you to move your body involuntarily, resulting in damage to nearby items or personal
injury.
Only wear 3D Glasses when viewing 3D images. Do not move around while wearing 3D Glasses.
Your vision may appear darker than normal, causing you to fall or injure yourself.
Try to stay as level with the viewing screen as possible when viewing 3D images.
Viewing 3D images at an angle reduces the 3D effect and may cause you to feel unwell due to unintended
color changes.
If using 3D Glasses in a room with fluorescent or LED lighting, you may see flashing or flickering throughout
the room. If this should occur, reduce the lighting until the flickering goes away or turn off the lights completely
when viewing 3D images. In some very rare cases, this flickering could trigger seizures or fainting for some
individuals. If you begin to feel uncomfortable or unwell at any time when viewing 3D images, stop
immediately.
Stay at least three times the height of the screen away from the screen when viewing 3D images.
The recommended viewing distance for an 80-inch screen is at least 3 meters, and at least 3.6 meters for a
100-inch screen.
Sitting or standing any closer than the recommended viewing distance may result in eye fatigue.
Caution
Health Risks
You should not use 3D Glasses if you are sensitive to light, have a heart condition, or are unwell.
Doing so could aggravate your pre-existing conditions.
Caution
Recommended Age of Use
The minimum recommended age to view 3D images is six years old.
Children under the age of six are still developing and viewing 3D images may cause complications. Consult
your doctor if you have any concerns.
Children viewing 3D images through 3D Glasses should always be accompanied by an adult. It is often difficult
to tell when a child is feeling tired or uncomfortable, which could result in them feeling suddenly unwell.
Always check with your child to ensure that they are not experiencing any eye fatigue during viewing.
Useful Functions
46
Caution
Lithium Coin Batteries
Only CR2032 lithium coin batteries can be used by this device. Do not attempt to use any other type of
batteries.
If the batteries are inversed by mistake, they could explode or leak, causing a fire, injury, or damaging the
surroundings.
Do not put batteries in a flame or heat them up in any way.
Doing so could result in an explosion.
Useful Functions
47
Changing Between Two Types of Images
Split Screen
You can project two different images at once, one on the left and
one on the right. You can project these images at the same size,
or make one larger or smaller than the other to view a sub image
while you are watching the larger main image.
Combinations of input sources for Split Screen projection
HDMI1 HDMI2 WirelessHD
*
Component Video PC
HDMI1
-- -
HDMI2
-- -
WirelessHD
*
-- -
Component
- -
Video
-
PC
- -
*
EH-TW6000W only
Projecting on a Split Screen
Starting split screen display
Press the button on the remote control while the projector
is projecting.
The input image is displayed as a split screen.
The image which was being displayed is projected on the left, and
the image specified in Source from the Split Screen Setup menu
is projected on the right. If the source being input is not supported,
nothing is displayed.
Press the
button again to exit split screen.
c
You cannot use split screen display when the source is USB.
Useful Functions
48
Changing the split screen settings
You can change the source and the display size used for split screen display from the Split Screen Setup menu.
a
Press the button during split
screen projection.
The Split Screen Setup menu is displayed.
c
Press the button during
split screen projection to
immediately display the Split
Screen Setup menu.
b
Make settings for each of the
displayed functions.
Available functions on the Split Screen Setup menu
Function Explanation
Screen Size
Changes the left and right screen size using Equal, Larger Left, and Larger Right.
Source Selects which source is displayed on the left and right.
Swap Screens Changes the left and right screens.
Audio Source Selects which screen's audio to output from the projector's built-in speaker.
When set to Auto, the audio from the image with the largest screen size is output. If
the screen sizes are the same, audio is output from the screen on the left.
Exit Split Screen Exits split screen display.
Useful Functions
49
HDMI Link
HDMI Link Function
When an AV device that meets the HDMI CEC standards is connected to the projector's HDMI port, you can
perform linked operations such as linked power on and volume adjustment for the AV system from one
remote control. Also, when projecting images in WirelessHD, you can use the HDMI link function (EH-
TW6000W only).
c
As long as the AV device meets the HDMI CEC standards, you can use the HDMI link function even
if the AV system in-between does not meet the HDMI CEC standards.
Connection Example
Projector Amplifier Player
HDMI Link Settings
Enabling HDMI Link
By pressing the button on the remote control, and
setting HDMI Link to On, you can operate the following
functions.
Function Explanation
Power On Link Powers on the projector when content is played back on the connected device. Or,
powers on the connected device when the projector is turned on.
Power Off Link Powers off the connected device when the projector is turned off.
This only works when the connected device's CEC power link function is enabled.
Note that depending on the status of the connected device (for example, if it is record-
ing), the device may not power off.
Audio Out Device When an AV system is connected, you can set whether to output audio from the pro-
jector's speaker, or from the AV system's speaker.
Input Change Link Changes the input source of the projector to HDMI when content is played back on the
connected device.
Connected Devices
Operations
You can perform operations such as Play, Stop, Fast Forward, Rewind, Next Chapter,
Previous Chapter, and Pause from the remote control for the projector.
Useful Functions
50
c
To use the HDMI Link function, you must configure the connected device. See the documentation
supplied with the connected device for more information.
Even when using the WirelessHD Transmitter with Power On Link set to Device -> PJ or
Bidirectional, if WirelessHD is set to On, this projector also turns on when the AV device connected
to the WirelessHD Transmitter is turned on (EH-TW6000W only).
s Settings-HDMI Link-Power On
Link p.61
Checking for connected devices
You can check the connected devices that are available for HDMI Link, and select on the device you want to
project the image from. Devices that can be controlled by HDMI link automatically become the selected
device.
a
Press the button, and then select
Device Connections.
The Device Connections list is displayed.
Devices that have a green icon to their left
are linked.
If the device name cannot be determined
this field is left blank.
b
Select the device you want to operate
using the HDMI Link function.
c
If the cable does not meet the HDMI standards, operations are not possible.
Some connected devices or functions of those devices may not operate properly even if they meet the
HDMI CEC standards. See the documentation and so on supplied with the connected device for more
information.
Useful Functions
51
Playing Back Image Data (Slideshow)
Compatible Data
The following types of files stored on USB storage devices such as USB memories, digital cameras, and so on
that are connected to the projector's USB port can be displayed as a slideshow.
Slideshow compatible file types
File Type (Extension) Notes
.jpg
Images using CMYK color mode are not compatible.
Progressive format images are not compatible.
Images with a resolution greater than 8192 x 8192 are not compatible.
Due to the characteristics of JPEG files, images may not be projected clearly if the
compression ratio is too high.
Playing a Slideshow
a
Connect a USB storage device.
Files are displayed as thumbnails.
To open a folder, select the folder, and then press the button.
If multiple drives are displayed, select the drive you want, and then press the
button.
c
If thumbnails of the files are not displayed, press the button on the remote control to
change the source.
b
Select Slideshow.
Use the buttons to select Slideshow at the bottom right of the screen, and then
press the
button.
Slideshow starts.
c
To close the Slideshow, disconnect the USB storage device.
Select an image from the thumbnails and press the button to enlarge the selected image.
Press the
buttons on the remote control when viewing an enlarged image to change between
images. You can also rotate the image using the
buttons.
Useful Functions
52
Display Settings for Image Files and Slideshow Operation Settings
You can set the file display order and slideshow operations on the option screen.
a
Use the buttons to position the cursor over the folder where you want
to set display conditions, and then press the
button. Select Option from the submenu
displayed, and then press the
button.
b
When the option screen is displayed, set each of the items.
Enable settings by positioning the cursor on the target item and pressing the button.
The following table shows the details for each item.
Display Order
You can select to display the files in Name Order or Date Order.
Sort Order
You can select to sort the files In Ascending or In Descending order.
Continuous Play
You can set whether to repeat the slideshow.
Screen Switching
Time
When playing a slideshow, you can set the time for a single file to be dis-
played. You can set a time between Off (0) to 60 seconds. When you set
Off, auto play is disabled.
Effect
You can set the screen effects when changing slides.
c
When you have finished making settings, use the buttons to position
the cursor over OK, and then press the
button.
The settings are applied.
If you do not want to apply the settings, position the cursor on Cancel, and then press the
button.
Useful Functions
53
Connecting with WirelessHD (EH-TW6000W
Only)
Installing and Connecting the WirelessHD Transmitter
You can use the included WirelessHD Transmitter to wirelessly receive image and sound data as well as control
signals.
This eliminates the need to connect any cables to the projector, which is convenient when you are unable to
place the projector near your AV devices.
Connect the Transmitter to the HDMI output of any AV device or AV System capable of HDMI playback.
Projector Transmitter Player
c
The receiver is located within the intake vent of the projector and therefore cannot receive any signals
directly from the rear. Set up the transmitter so that the front of the projector is facing the transmitter.
Place the WirelessHD Transmitter on a level surface.
You can view the signal strength from the WirelessHD settings menu. s Settings - WirelessHD -
Reception p.61
WirelessHD Settings
Changing the source
Press the button on the remote control to change the
source.
c
When receiving WirelessHD images, make sure Wire-
lessHD is set to On from the configuration menu.
s
Settings - WirelessHD p.61
Useful Functions
54
Reconnecting
If the projector cannot project images from the WirelessHD Transmitter, follow the steps below to reconnect.
a
Setup the WirelessHD Transmitter
close to the projector.
s
p.55
c
Check that there are no other
projectors operating in the area.
b
Start playback on the AV device, and
then turn on the projector and the
transmitter.
c
Approximately 10 seconds after
turning on the projector, press the
[Setup] button on the transmitter.
WirelessHD settings menu
a
Press the button.
The configuration menu is displayed.
b
Select Settings - WirelessHD.
The WirelessHD settings screen is
displayed.
c
Make settings for each of the
displayed functions.
Available functions on the WirelessHD settings menu
Function Explanation
Device Co nnectio ns Dis plays a list of available Wireles s H D devices that c an be connec ted. The device names
and MAC addresses are displayed in the list.
WirelessHD Enables or disables the WirelessHD function.
When it is disabled, turn off the WirelessHD Transmitter.
Reception Displays the reception.
Rename Device Name Allows you to change the names of devices displayed in Device Connections.
Erase Device Name Erases the changed device name, and returns the default name in its place.
Reset
You can reset all adjustment values for the WirelessHD settings menu to their default
settings.
c
You can find the unique MAC address for the WirelessHD Transmitter on the sticker on the bottom
of the device.
Useful Functions
55
WirelessHD Transmission Range
The following shows the communication transmission range for the WirelessHD.
Horizontal direction
Vertical direction (placed on a table and so on) Vertical direction (suspended from a ceiling)
c
The wireless transmission range varies depending on the placement and material of the surrounding
furniture and walls. The values given here are for your reference only.
The projector cannot communicate through walls.
Place the WirelessHD Transmitter on a wooden shelf or other location that does not block the signal
from being transmitted from the front of the device. Note that placing the transmitter on a metal shelf
may cause signal instability.
Depending on the reception strength, the image's color information may be automatically discarded
to avoid any interruptions and maintain a constant connection. To avoid any deterioration in image
quality, adjust the position of the transmitter so that the Reception is as strong as possible.
Configuration Menu
56
Configuration Menu Functions
Configuration Menu Operations
On the configuration menu, you can make adjustments and settings for Signal, Image, Input Signal, and so on.
a
Press the button.
Remote control Control panel
The configuration menu is displayed.
b
Use the buttons to
select the top menu on the left, and
then press the
button to confirm
the selection.
When you select the top menu on the left,
the sub menu on the right changes.
The line at the bottom is a guide for
operations.
c
Use the buttons to
select the sub menu on the right, and
then press the
button to confirm
the selection.
The adjustment screen for the selected
function is displayed.
d
Use the buttons to
adjust the settings.
Ex.) Adjustment bar
Ex.) Choices
Press the button on an item displaying
this
icon to change to the selection
screen for that item.
Press the
button to return to the
previous level.
e
Press the button to exit the
menu.
Configuration Menu
57
c
For items adjusted using an adjustment bar, such as the brightness level, you can press the
button while the adjustment screen is displayed to return the adjustment value to its default value.
Configuration Menu Table
If there is no image signal being input, you cannot adjust items related to the image or signal in the
configuration menu. Note that the items displayed for the image, the signal, and other information vary
depending on the image signal being projected.
Image menu
Function Menu/Settings Explanation
Color Mode
Auto, Dynamic, Living Room, Natural, Cinema,
3D Cinema, 3D Dynamic
Select a color mode based on your sur-
roundings and the image you are projec-
ting.
s p.29
Brightness
Adjusts the brightness when the image
appears too dark.
Contrast
Adjusts the contrast between light and
shade in the images. By increasing the
contrast, the images become vivid.
Color Satura-
tion
*
Adjusts the color saturation for the im-
ages.
Tint
*
Adjusts the tint for the images.
Sharpness
Standard
Adjusts the image sharpness.
Adjusts the overall image.
Advanced
*
Thin Line Enhance-
ment, Thick Line En-
hancement, Vert. Line
Enhancement, Horiz.
Line Enhancement
Adjusts the image sharpness.
Use this to adjust specific areas.
s p.36
Abs. Color
Temp.
5000 K to 10000K (12 increments) Adjusts the tint for the images. The image
is tinted blue for high values, and tinted
red for low values.
Skin Tone
Adjusts the skin tone. The image becomes
greener when set to a positive value and
redder when set to a negative value.
Advanced
Gamma 2.0, 2.1, 2.2, 2.3, 2.4 Performs gamma adjustments. You can
select a raw value or adjust the gamma
while looking at the image or graph.
s p.33
Customized
Adjust it from the im-
age, Adjust it from the
graph
Reset
RGB Offset R/G/B
Adjusts the offset and gain for each R, G,
and B color.
s p.34
Gain R/G/B
RGBCMY R/G/B/C/M/Y Hue, Satura-
tion, Bright-
ness
Adjusts the hue, saturation, and bright-
ness for each R, G, B, C, M, and Y color.
s p.32
Configuration Menu
58
Function Menu/Settings Explanation
Power Con-
sumption
Normal, ECO You can set the lamp brightness to one of
two settings.
Select ECO if the images being projected
are too bright. When ECO is selected, pow-
er consumption during projection decrea-
ses, and fan rotation noise is reduced.
Auto Iris
Off, Normal, High Speed You can change the luminance adjust-
ment tracking for changes in brightness in
the displayed image. Set to Off for no lu-
minance adjustment.
s p.36
Reset
Yes, No You can reset all adjustment values for
Image to their default settings.
*
This is not displayed when a computer image signal is being input.
Signal menu
No sub menu items are displayed for the signal menu for USB signal input.
Function Menu/Settings Explanation
3D Setup
*6
3D Display On, Off Enables or disables the 3D Display function.
s p.42
3D Format Auto, 2D, Side by
Side, Top and Bot-
tom
Sets the 3D format for the input signal. If set to
Auto, the format is recognized automatically.
3D Brightness Low, Medium, High Sets the brightness for the 3D image.
Inverse 3D Glasses Yes, No Reverses the synchronization timing for the left/
right shutters on the 3D Glasses and the left/right
images. Enable this function if the 3D effect is not
displayed correctly.
3D IR Emitter Built-in, External
Set to External if using an optional External 3D
IR emitter.
3D Viewing Notice On, Off Turns the notice that appears when viewing 3D
content on or off.
Aspect
*2
Auto, Normal, Full, Zoom, Wide Selects the aspect mode. s p.30
Zoom Size
*2
(Available when Aspect or Zoom are set.)
Any parts at the top or bottom that cannot be
seen when Zoom is set are squeezed vertically
to fit on the screen. The higher you set this value
the more the image is squeezed vertically.
Zoom Caption
Pos.
*2
(Available when Aspect or Zoom are set.)
If subtitles are not completely visible when view-
ing images with subtitles at the bottom, you can
adjust the position of the image up or down until
the subtitles become visible.
Tracking
*2
*3
Varies depending on the input signal. Adjusts computer images when vertical stripes
appear in the images.
Configuration Menu
60
Function Menu/Settings Explanation
(Advanced)
EPSON Super
White
*2
*6
On, Off
(This can only be set when the Color Mode is set
to Auto, Natural, Cinema, or3D Cinema and
when receiving signal input from the HDMI1 or
HDMI2 ports, or from WirelessHD.)
Set this to On if you are experiencing bright over
exposure of whites in your image. When set to
On, HDMI Video Range settings are disabled.
Overscan
*2
*6
Auto, Off, 2%, 4%,
6%, 8%
Changes the output image ratio (the range of the
projected image).
Off, 2 to 8%: Sets the range of the image. Off
projects all ranges. Depending on the image sig-
nal you may notice noise at the top and bottom
of the image.
Auto: This can only be set when receiving signal
input from the HDMI1 or HDMI2 ports, or from
WirelessHD. This may be automatically set to
Off or 8% depending on the input signal.
HDMI Video
Range
*1
*2
Auto, Normal, Ex-
panded
(This can only be set when EPSON Super
White is set to Off.)
When set to Auto, the video level for the DVD
input signal to the HDMI1 or HDMI2 ports, or to
the WirelessHD is automatically detected and
set.
If you experience under or overexposure when
set to Auto, set the video level of the projector
to match that of the DVD player's video level.
Your DVD player may be set to Normal or Expand.
The Auto option is not displayed when connec-
ted to a connected device's DVI port.
Reset
Yes, No
Resets all Signal settings except for Aspect to
their default settings.
*1
This is not displayed when a Video image signal is being input.
*2
Settings are saved for each type of input source or signal.
*3
This is only displayed when a PC image signal is being input.
*4
This cannot be set when an HDMI1, HDMI2, or WirelessHD image signal is being input.
*5
This is not displayed when a PC image signal is being input.
*6
This is only displayed when a Component, HDMI1, HDMI2, or WirelessHD image signal is being input.
(WirelessHD is for EH-TW6000W only.)
Configuration Menu
61
Settings menu
Function Menu/Settings Explanation
Keystone
H/V-Keystone V-Keystone -60 to 60 Performs vertical keystone correc-
tion.
s p.27
H-Keystone -60 to 60 Performs horizontal keystone cor-
rection.
s p.27
Auto V-Keystone On, Off
Enables or disables Auto V-Key-
stone.
s p.26
H-Keystone Adjuster On, Off
Enables or disables H-Keystone
Adjuster.
s p.26
Audio
Volume Volume 0 to 40 Adjusts the volume.
Inverse Audio On, Off Sets whether or not to invert the left
and right audio output channels.
Set to On when the projector is sus-
pended from a ceiling and is using
the internal speakers.
HDMI Link
Device Connections - Displays a list of devices connected
from the HDMI1 or HDMI2 ports, or
from WirelessHD
*
.
HDMI Link On, Off Enables or disables the HDMI Link
function.
Audio Out Device Projector, AV System When an AV system is connected,
you can set whether to output audio
from the projector's speaker, or
from the AV system's speaker.
Power On Link Off, Bidirectional, Device -> PJ,
PJ -> Device
Sets the link function when the
power is turned on.
Set to power on the projector when
content is played on a connected
device (Bidirectional or Device ->
PJ) or to power on a connected de-
vice when the projector is turned on
(Bidirectional or PJ -> Device).
Power Off Link On, Off Sets whether or not to power off
connected devices when the pro-
jector is turned off.
Configuration Menu
62
Function Menu/Settings Explanation
WirelessHD
*
Device Connections - Displays a list of available Wireless
HD devices that can be connected.
WirelessHD On, Off Enables or disables the WirelessHD
function.
Reception
Displays the reception.
Rename Device Name Device1 to Device9 Allows you to change the names of
devices displayed in Device Con-
nections.
Erase Device Name Device1 to Device9 Erases the changed device name,
and returns the default name in its
place.
Reset Yes, No
Resets WirelessHD settings to their
default settings.
Note that even if you reset the pro-
jector, the WirelessHD Transmitter
settings are not reset. See the doc-
umentation supplied with your
WirelessHD Transmitter for details
on how to reset the WirelessHD
Transmitter.
Lock Setting
Child Lock On, Off
This locks the
button on the
projector's control panel to prevent
children from turning on the pro-
jector by accident. You can turn on
the power when locked by holding
down the
button for approxi-
mately three seconds. You can still
turn off the device using the
button or the remote control as usu-
al.
If changed, this setting is enabled
after you power off the projector
and the cool-down process is com-
plete.
Note that even if Child Lock is set to
On, the projector still turns on when
the power cable is connected if Di-
rect Power On is set to On.
Control Panel Lock On, Off
When set to On, all buttons on the
control panel except for the
button are disabled. is dis-
played on the screen if any buttons
are pressed. To unlock, press and
hold the
button on the control
panel for at least 7 seconds.
If changed, this setting is enabled
once you close the configuration
menu.
Configuration Menu
63
Function Menu/Settings Explanation
Projection
Front, Front/Ceiling, Rear, Rear/Ceiling Change this setting depending on
how the projector is installed.
Front: Select if you are projecting
in front of the screen.
Front/Ceiling: Select if you are
projecting in front of the screen
suspended from the ceiling.
Rear: Select if you are projecting to
a rear screen from the back.
Rear/Ceiling: Select if you are pro-
jecting to a rear screen from the
back when the projector is suspen-
ded from the ceiling.
User Button
3D Format, 3D Brightness, Inverse 3D Glasses Select a configuration menu item to
assign to the
button on the
remote control. By pressing the
button, the assigned menu
item selection/adjustment screen is
displayed, allowing you to make
one-touch settings/adjustments.
Split Screen
- Starts split screen display. s p.47
Reset
Yes, No
Resets all Settings to their default
settings.
*
Only EH-TW6000W is displayed.
Extended menu
Function Menu/Settings Explanation
Operation
Direct Power On On, Off You can set up the projector so that projection
starts as soon as the power cable is plugged in
without any button operations.
Note that when this is set to On, projection starts
if power is restored after a blackout or other
power outage and the power cable is still plug-
ged into the projector.
Sleep Mode Off, 5min., 10min.,
30min.
If the set time is exceeded and no signal is input,
the projector is automatically turned off and en-
ters standby mode. When set to Off, the projec-
tor never enters sleep mode. When in standby
mode, press the
button on the remote con-
trol or the
button on the control panel to
start projection.
Illumination On, Off
Set this to Off if the light from the indicators on
the control panel bother you when watching a
movie in a dark room.
High Altitude Mode On, Off
Set this to On if you are using the projector above
an altitude of 1500 meters.
Configuration Menu
65
Info menu
Function Explanation
Lamp Hours
Displays the cumulative lamp operating time.
Source
Displays the source name for the connected equipment currently being projec-
ted.
Input Signal
Displays the content of Input Signal set in the Signal menu according to the
source.
Resolution
Displays the resolution.
Scan Mode
Displays the scan mode.
Refresh Rate
Displays the refresh rate.
3D Format
Displays the 3D format of the signal input during 3D projection (Frame Packing,
Side by Side, or Top and Bottom).
Sync Info
Displays the image signal information.
This information may be needed if service is required.
Deep Color
Displays deep color.
Video Signal
Displays the settings for Video Signal in the Signal menu.
Status
This is information about errors that have occurred on the projector.
This information may be needed if service is required.
Serial Number
Displays the projector's serial number.
Reset menu
Function Explanation
Reset All
Resets all items in the configuration menu to their default settings.
The following items are not reset to their defaults: Input Signal, Lamp Hours,
Language, User Button.
Reset Memory
Erases all settings saved using the Save Memory function.
Reset Lamp Hours
Resets the cumulative lamp hours use time to 0 H. Reset when you replace the
lamp.
Configuration Menu
66
Split Screen menu
Displayed by pressing the button during split screen projection.
Function Menu/Settings Explanation
Split Screen
Screen Size Equal, Larger Left, Larger Right Changes the left and right screen
sizes.
s p.48
Source Left, Right PC
Video
Component
HDMI1/HDMI2
WirelessHD
*
USB
Selects which source is displayed on
the left and right.
s p.48
Swap Screens Changes the left and right screens.
s p.48
Audio Source Auto, Screen Left, Screen Right Selects which screen's audio to out-
put from the projector's built-in
speaker.
s p.48
Exit Split Screen Exits split screen display.
s p.48
*
Only EH-TW6000W is displayed.
Troubleshooting
67
Problem Solving
Reading the Indicators
You can check the status of the projector from the flashing and lit , (operation indicators),
o
and
m
on the control panel.
Refer to the following table to check the projector's status and how to remedy problems shown by the
indicators.
Indicator status during an error/warning
: Lit : Flashing : Off
Indicators Status Remedy
(orange)
Replace Lamp
It is time to replace your lamp. Replace the lamp with a new lamp
as soon as possible.
s p.81
The lamp may explode if you continue to use it in this status.
(orange)
High Temp Warning
You can continue projecting. If the temperature rises too high
again, projection stops automatically.
If the projector is installed next to a wall, make sure there is at
least 20 cm between the wall and the projector's exhaust vent.
If the air filter is clogged, clean it. s p.77
(red)
Internal Error
The projector has malfunctioned.
Remove the power plug from the electrical outlet, and contact
your local dealer or the nearest Epson repair center.
s Epson
Projector Contact List
(red)
Fan Error
Sensor Error
Troubleshooting
68
Indicators Status Remedy
(red)
Lamp Error
Lamp Failure
There is a problem with the lamp, or it failed to turn on.
Disconnect the power cable, and then check if the lamp is
cracked.
s p.81
If it is not cracked, reinstall the lamp and turn on the power.
If reinstalling the lamp does not fix the problem, or if the lamp is
cracked, remove the power plug from the electrical outlet, and
contact your local dealer or the nearest Epson repair center.
s Epson Projector Contact List
If the air filter is clogged, clean it. s p.77
When using at an altitude of 1500 m or more, set High Altitude
Mode to On.
s Extended - Operation - High Altitude
Mode p.63
(red)
High Temp Error
(Overheating)
The internal temperature is too high.
The lamp turns off automatically and projection stops. Wait for
about five minutes. When the fan has stopped, disconnect the
power cable.
If the projector is installed next to a wall, make sure there is at
least 20 cm between the wall and the projector's exhaust vent.
If the air filter is clogged, clean it. s p.77
If turning the power back on does not clear the problem, stop
using the projector and remove the power plug from the elec-
trical outlet. Contact your local dealer or the nearest Epson repair
center.
s Epson Projector Contact List
Indicator status during normal operation
: Lit : Flashing : Off
Indicators Status Remedy
(blue)
Standby condition
When you press the button on the remote control, or the
button on the control panel, projection starts after a short
wait.
(blue)
Warm-up in progress
Warm-up time is about 30 seconds.
The power-off operation is disabled while the projector is warm-
ing-up.
(blue)
Cool-down in pro-
gress
All operations are disabled while the projector is cooling-down.
The projector enters standby condition when cool-down is com-
plete. If for any reason the power cable is disconnected during
cool-down, wait until the lamp has cooled down sufficiently
(about 10 minutes), reconnect the power cable, and then press
the
button on the remote control, or the button on the
control panel.
Troubleshooting
69
Indicators Status Remedy
(blue)
Projection in pro-
gress
The projector is operating normally.
c
Under normal operating conditions, the o and m indicators are off.
When the Illumination function is set to Off, all indicators are off under normal projection conditions.
s Extended - Operation - Illumination p.63
When the Indicators Provide No Help
Check the problem
Check the following table to see if your problem is mentioned, and go to the appropriate page for information
on handling the problem.
Problem Page
Problems relating to im-
ages
No images appear.
Projection does not start, the projection area is completely black, or
the projection area is completely blue.
p.70
Moving images being projected from a computer are not projected. p.70
The message "Not supported" is displayed.
p.71
The message "No Signal" is displayed.
p.71
Images are fuzzy or out of focus. p.71
Interference or distortion appears in the images. p.72
The image is truncated (large) or small, or only a part of the image is
projected.
p.72
Image colors are not right.
The whole image appears purplish or greenish, images are black &
white, or colors appear dull.
*
p.73
Images appear dark. p.73
Projection stops automatically. p.73
Problems when projection
starts
The projector does not turn on. p.74
Problems with the remote
control
The remote control does not respond. p.74
Problems with 3D Cannot project correctly in 3D. p.74
Problems with HDMI HDMI Link does not function. p.75
The device name is not displayed under device connections. p.75
Problems with WirelessHD Cannot project WirelessHD images. p.75
Problems with USB storage
devices
Slideshow does not start. p.76
*
Because color reproduction differs between monitors and computer LCD screens, the image projected by the
projector and the color tones displayed on the monitor may not match, however this is not a fault.
Troubleshooting
70
Problems relating to images
No images appear
Check Remedy
Is the projector turned on?
Press the
button on the remote control or the button
on the control panel.
Is the power cable connected? Connect the power cable.
Are the indicators switched off? Disconnect and then reconnect the projector's power cable.
Check that power is being supplied.
Is an image signal being input?
Check that the connected device is turned on. When Messag-
es is set to On from the configuration menu, image signal mes-
sages are displayed.
s Extended - Display - Messages p.63
Is the image signal format setting correct? When Video is input
If nothing is projected even when Video Signal is set to Auto
from the configuration menu, set the signal that matches the
connected device.
s Extended - Input Signal - Video Sig-
nal p.63
When Component is input
If nothing is projected even when Component is set to Auto
from the configuration menu, set the signal that matches the
connected device.
s Extended - Input Signal - Compo-
nent p.63
Are the configuration menu settings correct?
Reset all of the settings.
s Reset - Reset All p.65
(Only when projecting computer image sig-
nals)
Was the connection made while the power of
the projector or the computer was already
turned on?
If the connection is made while the power is already turned on,
the key (Function key and so on) that changes the computer's
image signal to external output may not work. Turn off the power
for the computer and the projector and then turn it back on
again.
Moving images are not displayed
Check Remedy
(Only when projecting computer image sig-
nals)
Is the computer's image signal set to external
output and to output to the LCD monitor at
the same time?
Depending on the computer's specifications, moving images
may not be displayed when the computer is set to external out-
put and to the LCD monitor output at the same time.
Change it so that the image signal is set to external output only.
For the computer's specifications, see the documentation sup-
plied with the computer.
Troubleshooting
71
The message "Not supported" is displayed
Check Remedy
Is the image signal format setting correct? When Video is input
If nothing is projected even when Video Signal is set to Auto
from the configuration menu, set the signal that matches the
connected device.
s Extended - Input Signal - Video Sig-
nal p.63
When Component is input
If nothing is projected even when Component is set to Auto
from the configuration menu, set the signal that matches the
connected device.
s Extended - Input Signal - Compo-
nent p.63
(Only when projecting computer image sig-
nals)
Do the image signal's frequency and resolu-
tion correspond to the mode?
Check the image signal being input in Resolution from the con-
figuration menu, and check that it corresponds to the projector's
resolution.
s p.85
The message "No Signal" is displayed
Check Remedy
Are the cables connected correctly?Check that all the cables required for projection are securely
connected.
s p.18
Is the correct image input port selected? Change the image with the source buttons on the remote con-
trol, or the
button on the control panel. s p.23
Is the connected device turned on? Turn on the device.
(Only when projecting computer image sig-
nals)
Are the image signals being output to the
projector?
Change it so that the image signal is set to external output, and
not just the computer's LCD monitor. For some models, when
the image signals are output externally, they no longer appear
on the LCD monitor.
For the computer's specifications, see the documentation sup-
plied with the computer.
If the connection is made while the power of the projector or the
computer is already turned on, the Fn key (Function key) that
changes the computer's image signal to external output may not
work. Turn the power for the computer and the projector off and
then back on again.
Images are fuzzy or out of focus
Check Remedy
Has the focus been adjusted? Adjust the focus. s p.25
Is the lens cover attached? Remove the lens cover.
Is the projector at the correct distance? Check the recommended projection range.
s p.17
Troubleshooting
73
Image colors are not right
Check Remedy
Is the image signal format setting correct? When Video is input
If nothing is projected even when Video Signal is set to Auto
from the configuration menu, set the signal that matches the
connected device.
s Extended - Input Signal - Video Sig-
nal p.63
When Component is input
If nothing is projected even when Component is set to Auto
from the configuration menu, set the signal that matches the
connected device.
s Extended - Input Signal - Compo-
nent p.63
Are the cables connected correctly?Check that all the cables required for projection are securely
connected.
s p.18
For the Video and Component ports, make sure the connector is
the same color as the cable port.
s p.18
Is the contrast adjusted correctly?
Adjust the Contrast setting from the configuration menu.
s Image - Contrast p.57
Is the color adjusted correctly?
Adjust the Advanced setting from the configuration menu.
s Image - Advanced p.57
(Only when projecting images from a video
device)
Are the color saturation and tint adjusted cor-
rectly?
Adjust the Color Saturation and Tint settings from the config-
uration menu.
s p.57
Images appear dark
Check Remedy
Is the image brightness set correctly?
Adjust the Brightness setting from the configuration menu.
s Image - Brightness p.57
Is the contrast adjusted correctly?
Adjust the Contrast setting from the configuration menu.
s Image - Contrast p.57
Is it time to replace the lamp? When the lamp is nearly ready for replacement, the images be-
come darker and the color quality becomes poorer. When this
happens, replace the lamp with a new lamp.
s p.81
Projection stops automatically
Check Remedy
Is Sleep Mode enabled?
If no image signal is being input and no operations are made for
approximately 30 minutes, the lamp turns off automatically, and
the projector enters standby status. The projector returns from
standby status when you press the
button on the remote
control or the
button on the control panel. If you do not want
to use Sleep Mode, change the setting to Off.
s Extended -
Operation - Sleep Mode p.63
Troubleshooting
74
Problems when projection starts
The projector does not turn on
Check Remedy
Is the power turned on?
Press the
button on the remote control or the button
on the control panel.
Is Child Lock set to On? When Child Lock is set to On from the configuration menu, hold
down the
button on the control panel for approximately
three seconds, or perform operations from the remote control.
s Settings - Lock Setting - Child Lock p.61
Is Control Panel Lock set to On?If Control Panel Lock is set to On from the configuration menu,
all of the control panel buttons except for
are disabled. Per-
form operations from the remote control.
s Settings - Lock
Setting - Control Panel Lock p.61
Are the indicators switched off? Disconnect and then reconnect the projector's power cable.
Check that power is being supplied.
Do the indicators turn on and off when the
power cable is touched?
Turn off the projector, and then disconnect and reconnect the
projector's power cable. If the problem continues, stop using the
projector, remove the power plug from the electrical outlet, and
contact your local dealer or the nearest projector information
center.
s Epson Projector Contact List
Problems with the remote control
The remote control does not respond
Check Remedy
Is the remote control light-emitting area
pointing towards the remote receiver on the
projector during operation?
Point the remote control towards the remote receiver. Also,
check the operating range.
s p.21
Is the remote control too far from the projec-
tor?
Check the operating range.
s p.21
Is direct sunlight or strong light from fluores-
cent lamps shining onto the remote receiver?
Set the projector up in a location where strong light does not
shine onto the remote receiver.
Are the batteries dead or have the batteries
been inserted correctly?
Make sure the batteries are inserted correctly or replace the bat-
teries with new ones if necessary.
s p.21
Problems with 3D
Cannot project correctly in 3D
Check Remedy
Are the 3D Glasses turned on? Turn on the 3D Glasses. Also, check that the insulation tape in
the battery section has been removed.
Is the input image in 3D? Check that the input image is 3D compatible.
Troubleshooting
76
Check Remedy
Is WirelessHD set to Off? When WirelessHD is set to Off from the configuration menu,
projection is not possible for WirelessHD input signals. Set Wire-
lessHD to On, and then press the
button. s Settings -
WirelessHD p.61
Are signals being received within the Wire-
lessHD transmission range?
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
s p.55
Is the supplied WirelessHD Transmitter
turned on?
Check the power lamp on the WirelessHD Transmitter. If there is
no power being supplied, make sure the connector for the AC
adapter is securely connected, and then turn on the power
switch.
Is the Link indicator for the supplied Wire-
lessHD Transmitter off?
No AV device is connected. Check that the HDMI cable is securely
connected.
Are the indicators of the supplied WirelessHD
Transmitter flashing alternately?
A temperature warning has occurred. Operations are stopped if
there is not enough ventilation, such as when the device is placed
on an audio rack, or if it is being used in a room with a high
ambient temperature. Wait until it has cooled down, and then
try again.
Interference or distortion appear in WirelessHD images
Check Remedy
Are signals being received within the Wire-
lessHD transmission range?
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
s p.55
Are there any obstructions between the Wire-
lessHD Transmitter and the projector?
Because WirelessHD communicates using a tight beamed elec-
tromagnetic wave, if there are any people or objects and so on
obstructing the communication path, this could have an adverse
affect on the image. Make sure that there are no obstacles be-
tween the WirelessHD Transmitter and the projector within the
WirelessHD transmission range.
s p.55
Is the reception too low? If the transmissions are not strong enough, communication may
be unstable.
Check Reception as you set up the transmitter as it is sometimes
possible to improve the strength of the transmission by moving
the WirelessHD Transmitter or changing its direction.
s Set-
tings - WirelessHD - Reception p.61
Transmission strength may differ depending on the surround-
ings, or they may be unstable. While checking Reception, setup
the transmitter in a location where the number displayed re-
mains steady.
s Settings - WirelessHD - Reception p.61
Problems with USB storage devices
Slideshow does not start
Check Remedy
Is the USB storage device using a security
function?
You may not be able to use USB storage devices that incorporate
security functions.
Maintenance
78
d
Hold the air filter with the surface
facing down and tap it 4 or 5 times to
remove the dust.
Turn it over and tap the other side in the
same way.
Attention
If the air filter is hit too hard, it may
become unusable due to deformities
and cracks.
e
Remove any dust remaining on the air
filter by using a vacuum cleaner from
the front side.
f
Install the air filter into the air filter
cover.
Insert the protruding section of the air filter
into the hole in the cover, and then press it
in firmly.
g
Install the air filter cover.
Press the cover until it clicks into place.
Cleaning the main unit
Clean the projector's surface by wiping it gently with a soft cloth.
If it is particularly dirty, moisten the cloth with water containing a small amount of neutral detergent, and
then firmly wring the cloth dry before using it to wipe the surface.
Attention
Do not use volatile substances such as wax, alcohol, or thinner to clean the projector's surface. The quality
of the case may change or the paint may peel off.
Maintenance
80
Replacing Consumables
Replacing the air filter
c
Dispose of used air filters in accordance with your local laws and regulations.
Material: Polypropylene
a
Press the button on the remote
control or the control panel to turn off
the power, and then disconnect the
power cable.
b
Remove the air filter cover.
Hook your finger into the tab on the air filter
cover, and pull it straight out.
c
Remove the old air filter.
Place your finger in the grove and remove
the air filter.
d
Install the new air filter into the air filter
cover.
Insert the protruding section of the air filter
into the hole in the cover, and then press it
in firmly.
e
Install the air filter cover.
Press the cover until it clicks into place.
Maintenance
81
Replacing the lamp
Warning
When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be
broken. If replacing the lamp of a projector that has been suspended from the ceiling, you should always
assume that the lamp is cracked, and remove the lamp cover with care. When you open the lamp cover,
small shards of glass could fall out. If any shards of glass get into your eyes or mouth, contact a doctor
immediately.
Caution
Do not touch the lamp cover immediately after turning off the projector as it is still hot. Wait until the lamp
has cooled down sufficiently before removing the lamp cover. Otherwise, you could get burnt.
a
Press the button on the remote
control or the control panel to turn off
the power, and then disconnect the
power cable.
b
Loosen the lamp cover fixing screw.
c
Remove the lamp cover.
Slide the lamp cover straight forward and
remove it.
d
Loosen the lamp fixing screw.
e
Remove the old lamp.
Grip the knob firmly and pull it straight out.
f
Install the new lamp.
Make sure the lamp is facing the correct
direction and press it in.
Maintenance
82
g
Tighten the lamp fixing screw.
h
Install the lamp cover.
Slide the cover back into place.
i
Tighten the lamp cover fixing screw.
Warning
Do not disassemble or remodel the lamp.
Caution
Make sure you install the lamp and lamp cover securely. If they are not installed correctly, the power does
not turn on.
The lamp contains mercury. Dispose of used lamps in accordance with your local laws and regulations on
disposing of fluorescent tubing.
Resetting lamp hours
After replacing the lamp, make sure you reset the lamp hours.
The projector records how long the lamp is turned on and a message and indicator notify you when it is time
to replace the lamp.
a
Turn on the power.
b
Press the button.
The configuration menu is displayed.
Maintenance
83
c
Select Reset - Reset Lamp Hours.
A reset confirmation message is displayed.
d
Use the buttons to select Yes,
and then press the
button to
execute.
The lamp hours are reset.
Appendix
84
Optional Accessories and Consumables
The following optional accessories/consumables are available for purchase if required. This list of optional
accessories/consumables is current as of: 2011.7. Details of accessories are subject to change without notice.
Varies depending on country of purchase.
Optional Items
Name Model No. Explanation
Ceiling mount
*
ELPMB20
ELPMB22
Use when installing the projector on a ceiling.
Ceiling pipe 600 (600 mm white)
*
ELPFP07 Use when installing the projector on a high ceiling.
Ceiling pipe 450 (450 mm white)
*
ELPFP13
Ceiling pipe 700 (700 mm white)
*
ELPFP14
3D Glasses ELPGS01 You will need additional pairs to watch 3D images
in a group.
External 3D IR emitter ELPIE01 Use this emitter when you cannot view 3D images
normally, or if you are in a particularly spacious room
and the projector is a long way from the screen.
*
Special expertise is required to suspend the projector from a ceiling. Contact your local dealer.
Consumables
Name Model No. Explanation
Lamp unit ELPLP68 Use as a replacement for used lamps. (1 lamp)
Air filter ELPAF38 Use as a replacement for used air filters. (1 air filter)
Appendix
85
Supported Resolutions
Component Video
Signal Refresh Rate (Hz) Resolution (dots)
SDTV (480i) 60 720 x 480
SDTV (576i) 50 720 x 576
SDTV (480p) 60 720 x 480
SDTV (576p) 50 720 x 576
HDTV (720p) 50/60 1280 x 720
HDTV (1080i) 50/60 1920 x 1080
HDTV (1080p) 50/60 1920 x 1080
Composite Video
Signal Refresh Rate (Hz) Resolution (dots)
TV (NTSC) 60 720 x 480
TV (SECAM) 50 720 x 576
TV (PAL) 50/60 720 x 576
Computer Signals (Analog RGB)
Signal Refresh Rate (Hz) Resolution (dots)
VGA 60/72/75/85 640 x 480
SVGA 56/60/72/75/85 800 x 600
XGA 60/70/75/85 1024 x 768
SXGA 70/75/85 1152 x 864
60/75/85 1280 x 960
60/75/85 1280 x 1024
WXGA 60 1280 x 768
60 1360 x 768
60/75/85 1280 x 800
Appendix
87
Specifications
Product name
EH-TW6000W/EH-TW6000/EH-TW5900
Appearance (not including adjustable
foot)
420 (W) x 137.3 (H) x 365 (D) mm
Panel Size
0.61" wide
Display method
Polysilicon TFT active matrix
Resolution
1920 (W) x 1080 (H) x 3
Scanning Fre-
quency
Digital
Pixel Clock: 13.5 - 148.5 MHz
Horizontal: 15.63 - 67.5 kHz
Vertical: 24 - 60 Hz
Analog
Pixel Clock: 13.5 - 157.5 MHz
Horizontal: 15.63 - 91.15 kHz
Vertical: 50 - 85 Hz
Focus adjustment
Manual
Zoom adjustment
Manual (approx. 1 to 1.6)
Lamp (light source)
UHE lamp 230 W, Model No.: ELPLP68
Power supply
100 to 240 V AC ±10%, 50/60 Hz, 3.7 - 1.7 A
Power con-
sumption
100 to 120 V area
Operating: 372 W
Standby power consumption (when HDMI Link is disabled) 0.26 W
Standby power consumption (when HDMI Link is enabled) 5.7 W
220 to 240 V area
Operating: 358 W
Standby power consumption (when HDMI Link is disabled) 0.35 W
Standby power consumption (when HDMI Link is enabled) 6.3 W
Operating altitude
Altitude 0 to 2286 m
Operating temperature
+5 to 35°C (No condensation)
Storage temperature
-10 to +60°C (No condensation)
Mass
Approx. 6.2 kg (EH-TW6000W), Approx. 6.0 kg (EH-TW6000/EH-
TW5900)
Connectors
Component port x 1, 3RCA pin jack
PC port x 1, Mini D-Sub15-pin (female) blue
HDMI port x 2, HDMI
For HDCP, For CEC signals, For linear PCM
Video port x 1, RCA pin jack
RS-232C port x 1, D-sub 9-pin (male)
Audio-L/R port x 1, RCA pin jack
USB TypeA port x 1, (for USB connected equipment)
External 3D IR port x 1, RJ45
Speaker
Maximum input 10 W x 2, Rated impedance 8 Ω
This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
Appendix
88
Обладнання відповідає вимогам Технічного регламенту обмеження використання деяких небезпечних
речовин в електричному та електронному обладнанні.
Angle of tilt
If you use the projector tilted at an angle of more than 10° it could be
damaged or cause an accident.
RS-232C Cable layouts
Connector shape: D-sub 9-pin (male)
Projector input port name: RS-232C
Signal name:
Signal Name Function
GND Signal wire ground
TD Transmit data
RD Receive data
<At the projector> <At the computer>
<At the projector> (PC serial cable) <At the computer>
Communications protocol
Default baud rate setting: 9600 bps
Data length: 8 bit
Parity: None
Stop-bit: 1 bit
Flow control: None
Appendix
89
DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers
We: Epson America, Inc.
Located at: 3840 Kilroy Airport Way
MS: 3-13
Long Beach, CA 90806
Tel: 562-290-5254
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the
FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and
found to be compliant with the standards. Records maintained continue to reflect the equipment being
produced can be expected to be within the variation accepted, due to quantity production and testing on a
statistical basis as required by 47CFR 2.909. Operation is subject to the following two conditions : (1) this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Trade Name: EPSON
Type of Product: LCD Projector
Model: H421C/H422C/H450C
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC
Certification or Declaration of this device and may cause interference levels which exceed the limits
established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded
equipment interface cable with this device. If this equipment has more than one interface connector, do not
leave cables connected to unused interfaces. Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
Appendix
90
Glossary
This section briefly explains the difficult terms that are not explained in context in the text of this guide. For
details, refer to other commercially available publications.
HDCP
HDCP is an abbreviation for High-bandwidth Digital Content Protection. It is used to pre-
vent illegal copying and protect copyrights by encrypting digital signals sent over DVI and
HDMI ports. Because the HDMI port on this projector supports HDCP, it can project digital
images protected by HDCP technology. However, the projector may not be able to project
images protected with updated or revised versions of HDCP encryption.
HDMI
An abbreviation for High Definition Multimedia Interface. This is the standard by which
HD images and multichannel audio signals are digitally transmitted.
HDMI
is a standard aimed at digital consumer electronics and computers. By not com-
pressing the digital signal, the image can be transferred at the highest quality possible. It
also provides an encryption function for the digital signal.
HDTV
An abbreviation for High-Definition Television. This refers to high-definition systems
which satisfy the following conditions.
Vertical resolution of 720p or 1080i or greater (p = Progressive, i = Interlace)
Screen aspect of 16:9 Dolby Digital audio reception and playback (or output)
NTSC
An abbreviation for the National Television Standards Committee. A terrestrial analog
color broadcasting method. This method is used in Japan, North America, and Latin Amer-
ica.
PAL
An abbreviation for Phase Alternation by Line. A terrestrial analog color broadcasting
method. This method is used in various Western European countries (with the exception
of France), Asian countries such as China, and Africa.
SDTV
An abbreviation for Standard Definition Television. This refers to standard television sys-
tems which do not satisfy the conditions for HDTV High-Definition Television.
SECAM
An abbreviation for SEquential Couleur A Memoire. A terrestrial analog color broadcasting
method. This method is used in France, Eastern Europe, the former Soviet Union, the
Middle East, Africa, and so on.
SVGA
A screen size standard with a resolution of 800 (horizontal) x 600 (vertical) dots.
SXGA
A screen size standard with a resolution of 1,280 (horizontal) x 1,024 (vertical) dots.
VGA
A screen size standard with a resolution of 640 (horizontal) x 480 (vertical) dots.
XGA
A screen size standard with a resolution of 1,024 (horizontal) x 768 (vertical) dots.
YCbCr
In component image signals for SDTV, Y is the brightness, while Cb and Cr indicate the
color difference.
YPbPr
In component image signals for HDTV, Y is the brightness, while Pb and Pr indicate the
color difference.
Aspect Ratio
The ratio between an image's length and its height. Screens with a horizontal:vertical ratio
of 16:9, such as HDTV screens, are known as wide screens.
SDTV and general computer displays have an aspect ratio of 4:3.
Interlace
Transmits information needed to create one screen by sending every other line, starting
from the top of the image and working down to the bottom. Images are more likely to
flicker because one frame is displayed every other line.
Appendix
91
General Notes
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the
information contained herein. Neither is any liability assumed for damages resulting from the use of the infor-
mation contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties
for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse,
or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the
U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options
or any consumable products other than those designated as Original Epson Products or Epson Approved Prod-
ucts by Seiko Epson Corporation.
The contents of this guide may be changed or updated without further notice.
Illustrations in this guide and the actual projector may differ.
Restriction of Use
When this product is used for applications requiring high reliability/safety such as transportation devices related
to aviation, rail, marine, automotive etc.; disaster prevention devices; various safety devices etc; or functional/
precision devices etc, you should use this product only after giving consideration to including fail-safes and
redundancies into your design to maintain safety and total system reliability. Because this product was not
intended for use in applications requiring extremely high reliability/safety such as aerospace equipment, main
communication equipment, nuclear power control equipment, or medical equipment related to direct medical
care etc, please make your own judgment on this product’s suitability after a full evaluation.
General Notice
Macintosh, Mac, Mac OS, and iMac are trademarks of Apple Inc.
Microsoft, Windows, Windows NT, Windows Vista, Windows 7, PowerPoint, and Windows logo are trademarks
or registered trademarks of Microsoft Corporation in the United States and/or other countries.
HDMI and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing
LLC.
WirelessHD and the WirelessHD logo are trademarks or registered trademarks of WirelessHD LLC.
Other product names used herein are also for identification purposes only and may be trademarks of their
respective owners. Epson disclaims any and all rights in those marks.
©SEIKO EPSON CORPORATION 2011. All rights reserved.
Index
92
2
2-2 Pull-down ................................................. 59
3
3D brightness ................................................. 58
3D display ......................................................... 58
3D emitter ........................................................ 43
3D format ......................................................... 58
3D Glasses ........................................................ 41
3D images ........................................................ 41
3D IR emitter ................................................... 58
3D settings ....................................................... 58
3D viewing notice ......................................... 58
A
Abs. Color Temp. ........................................... 57
Adjusting RGB ................................................. 34
Adjusting the tilt ............................................ 26
Advanced .................................................. 57, 59
Air filter .............................................................. 77
Air filter cover .......................................... 77, 80
Air filter replacement period ..................... 79
Appearance ..................................................... 15
Aspect ......................................................... 30, 58
Audio ................................................................. 61
Audio source ................................................... 66
Auto iris ...................................................... 36, 58
Auto setup ....................................................... 59
Auto V-Keystone ..................................... 26, 61
B
Brightness ................................................. 32, 57
Brightness control ......................................... 58
C
CEC standards ................................................. 49
Child lock .......................................................... 62
Cleaning the 3D Glasses ............................. 79
Cleaning the air filter .................................... 77
Cleaning the lens ........................................... 79
Cleaning the main unit ................................ 78
Color mode ............................................... 29, 57
Color saturation ............................................. 57
Component ..................................................... 64
Component port ............................................ 18
Configuration menu ..................................... 56
Connecting ...................................................... 18
Connecting to a computer ......................... 19
Connecting to video equipment ............. 18
Connecting USB devices ............................. 19
Connecting WirelessHD devices .............. 20
Contrast ............................................................ 57
Control panel .............................................. 9, 10
Control panel lock ......................................... 62
Cool-down ....................................................... 23
D
Deep color ........................................................ 65
Device connections ...................................... 62
Direct power on ............................................. 63
Display background ..................................... 64
Display settings .............................................. 64
Displaying the test pattern ........................ 25
E
EPSON Super White ...................................... 60
Erase device name ........................................ 62
Erase memory .......................................... 39, 64
Error/Warning indicators ............................ 67
Exit split screen .............................................. 66
Extended menu .............................................. 63
F
Focus .................................................................. 71
Focus adjustment .......................................... 25
Focus ring .................................................... 9, 25
Frame Packing ................................................ 42
G
Gain ............................................................. 34, 57
Gamma ....................................................... 33, 57
H
H/V-Keystone ........................................... 27, 61
HDMI link .......................................................... 49
HDMI port ......................................................... 49
HDMI video range ......................................... 60
HDMI1 port ............................................... 18, 19
HDMI2 port ............................................... 18, 19
High altitude mode ...................................... 63
H-Keystone ...................................................... 61
H-Keystone adjuster .............................. 26, 61
H-Keystone slider ............................................. 9
Hue .............................................................. 32, 57
I
Illumination ..................................................... 63
Image ................................................................. 29
Image menu .................................................... 57
Images ............................................................... 51
Indicators .......................................................... 67
Info menu ......................................................... 65
Index
93
Input signal ............................................... 64, 65
Inverse 3D Glasses ......................................... 58
Inverse audio ................................................... 61
K
Keystone .................................................... 26, 61
Keystone distortion ...................................... 26
L
Lamp cover ................................................. 9, 81
Lamp cover fixing screw ............................. 81
Lamp hours ...................................................... 65
Lamp replacement period ......................... 79
Language ......................................................... 64
Left screen ........................................................ 66
Load memory ........................................... 39, 64
Lock setting ..................................................... 62
M
Memory function ........................................... 38
Memory menu ................................................ 64
Menu .................................................................. 56
Menu color ....................................................... 64
Menu position ................................................ 64
Messages .......................................................... 64
Model no. display mode ............................. 64
Motion detection ........................................... 59
N
Noise .................................................................. 72
Noise reduction .............................................. 59
O
Offset .......................................................... 34, 57
Operating range ............................................ 21
Operating time ............................................... 82
Operation ......................................................... 63
Overscan ........................................................... 60
P
PC port ............................................................... 19
Position ............................................................. 59
Power ................................................................. 23
Power Off Link ................................................ 49
Power On Link ................................................ 49
Power supply .................................................. 22
Progressive ...................................................... 59
Projection ......................................................... 63
Projection size ......................................... 17, 25
R
Reception ......................................................... 62
Refresh rate ...................................................... 65
Remote control ....................................... 13, 21
Rename device name .................................. 62
Rename memory ........................................... 64
Renaming a memory .................................... 39
Replacement periods for consumables
................................................................................ 79
Replacing consumables .............................. 80
Replacing the air filter .................................. 80
Replacing the lamp ....................................... 81
Reset ....................................... 58, 60, 62, 63, 64
Reset all ............................................................. 65
Reset lamp hours .................................... 65, 82
Reset memory .......................................... 39, 65
Reset menu ...................................................... 65
Resolution ........................................................ 65
RGB ..................................................................... 57
RGBCMY ..................................................... 32, 57
Right screen ..................................................... 66
S
Saturation .................................................. 32, 57
Save memory ........................................... 38, 64
Scan mode ....................................................... 65
Screen size ....................................................... 66
Serial number ................................................. 65
Settings menu ................................................ 61
Setup level ....................................................... 59
Sharpness .................................................. 36, 57
Side by Side ..................................................... 42
Signal menu .................................................... 58
Skin tone ........................................................... 57
Sleep mode ...................................................... 63
Slideshow ......................................................... 51
Source .................................................. 23, 65, 66
Specifications .................................................. 87
Split screen ............................................... 47, 66
Standby confirmation .................................. 64
Startup screen ................................................ 64
Status ................................................................. 65
Sub menu ......................................................... 56
Supported resolutions ................................. 85
Swap screens .................................................. 66
Sync info ........................................................... 65
Sync. ................................................................... 59
T
Tint ...................................................................... 57
Top and Bottom ............................................. 42
Top menu ......................................................... 56
Index
94
Tracking ............................................................ 58
Transmission range ...................................... 55
U
USB ..................................................................... 51
User button ...................................................... 63
V
Video port ........................................................ 18
Video signal .............................................. 64, 65
Viewing area .................................................... 43
V-Keystone ....................................................... 61
Volume ....................................................... 28, 61
W
Wide ................................................................... 30
WirelessHD ................................................ 53, 62
Z
Zoom .................................................................. 30
Zoom adjustment ......................................... 25
Zoom Caption Pos. ....................................... 58
Zoom ring ........................................................... 9
Zoom size ......................................................... 58
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EH-TW5900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EH-TW5900 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EH-TW5900

Epson EH-TW5900 User Manual - German - 98 pages

Epson EH-TW5900 User Manual - Dutch - 99 pages

Epson EH-TW5900 User Manual - Spanish - 97 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info