617836
63
Zoom out
Zoom in
Previous page
1/86
Next page
Troubleshooting
62
Check Remedy
Is an extension cable being used? If an extension cable is used, electrical interference may affect
the signals.
(Only when projecting computer image sig‐
nals)
Are the Sync. and Tracking settings adjusted
correctly?
The projector uses automatic adjustment functions to project at
the optimum status. However, depending on the signal, some
may not be adjusted correctly even after performing self correc‐
tions. If this happens, adjust the Tracking and Sync. settings
from the Configuration menu.
s Signal - Tracking/Sync. p.47
(Only when projecting computer image sig‐
nals)
Is the correct resolution selected?
Set the computer so that the signals being output are compatible
with the projector.
s p.74
Part of the image is truncated (large) or small
Check Remedy
Is the correct Aspect selected?
Press the
button, and then select the Aspect that matches
the input signal.
s Signal - Aspect p.47
Is the image Position adjusted correctly? Adjust the Position setting from the Configuration menu.
s Signal - Position p.47
(Only when projecting computer image sig‐
nals)
Is the correct resolution selected?
Set the computer so that the signals being output are compatible
with the projector.
s p.74
Is the 3D Format set to something other than
Auto?
Unless the 3D format of the AV device and 3D Format of the
projector are the same, part of the image may not be displayed.
Check that Auto is set during 3D video projection.
s Signal -
3D Setup - 3D Format p.47
Image colors are not right
Check Remedy
Is the image signal format setting correct? When Video is input
If nothing is projected even when Video Signal is set to Auto
from the Configuration menu, set the signal that matches the
connected device.
s Extended - Input Signal - Video Sig‐
nal p.51
When PC is input
If nothing is projected even when PC Signal is set to Auto from
the Configuration menu, set the signal that matches the con‐
nected device.
s Extended - Input Signal - PC Signal p.51
Are the cables connected correctly?Check that all the cables required for projection are securely
connected.
s p.17
For the Video and PC ports, make sure the connector is the same
color as the cable port.
s p.17
Is the contrast adjusted correctly?
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.46
Is the color adjusted correctly?
Adjust the Advanced setting from the Configuration menu.
s Image - Advanced p.46
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EH-TW5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EH-TW5100 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EH-TW5100

Epson EH-TW5100 User Manual - German - 91 pages

Epson EH-TW5100 User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info