500286
66
Zoom out
Zoom in
Previous page
1/78
Next page
You can monitor and control the projector from a computer, via USB.
This is done by connecting the projector and the computer with a USB
cable, and entering communication commands (ESC/VP21 commands).
Before You Begin
To monitor and control the projector with ESC/VP21 commands, the
following preparations must be carried out.
Procedure
A
Install the USB communication driver (EPSON USB-COM
Driver) to your computer. For information about the EPSON
USB-COM Driver, contact your local dealer or the nearest
address provided in the Support and Service Guide.
s Epson
Projector Contact List
B
Set Extended - Link 21L to On from the projector's
Configuration menu.
C
Connect the computer's USB port to the projector's
USB(TypeB) port with a USB cable.
From second time on, start from step two.
Command List
When the power ON command is transmitted to the projector, the
power turns on and it enters warm-up mode. When the projector's
power has turned on, a colon ‘:’ (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ‘:’, and then accepts the next command.
If the command being processed terminates abnormally, an error
message is output and a ‘:’ is returned.
Item Command
Power ON/OFF On PWR ON
Off PWR OFF
Signal selection Computer Auto SOURCE 1F
RGB SOURCE 11
HDMI SOURCE 30
Video SOURCE 41
S-Video SOURCE 42
USB SOURCE 52
A/V Mute On/Off On MUTE ON
Off MUTE OFF
A/V Mute selection Black MSEL 00
Blue MSEL 01
Logo MSEL 02
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Communications protocol
Default baud rate setting: 9600bps (the speed during communication
complies with the USB 1.1 standard.)
Data length: 8 bit
Parity: None
Stop-bit: 1 bit
Flow control: None
Monitoring and Controlling the Projector Using a Computer (ESC/VP21 Commands)
66
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EH-TW4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EH-TW4500 in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EH-TW4500

Epson EH-TW4500 User Manual - Dutch - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info