500289
36
Zoom out
Zoom in
Previous page
1/66
Next page
34
Configuration Menu Functions
This adjusts the images if vertical stripes appear in the images.
This adjusts the images if flickering, fuzziness or interference appear in the images.
Flickering and fuzziness may also occur when the brightness, contrast
and sharpness settings are
adjusted.
Clearer adjustments can be obtained if you adjust the "Tracking" first and then adjust the "Sync".
(Setting is not possible when signals are being input from the [HDMI1] /[HDMI2] input port.)
When part of the image is clipped, move the image display position vertically and horizontally so that the
entire image is projected. Press , , and to adjust the position.
(This can be set only when signals are being input from the [Video] / [S-Video] input port, or 480i, 576i,
1080i signals are being input from the [Component] / [HDMI1] / [HDMI2] input port.)
Interlace
(i) signals are converted to progressive (p) signals using a method appropriate for the image.
Off :This is ideal for using when viewing images with a large amount of movement.
Video :This is ideal for general video images.
Film/Auto :Optimum conversion is performed for movie, computer graphics, and animation input
signals.
(Setting is not possible when "4-4 pull-down" is set to "On". And this can be set only when signals are
being input from the [Video] / [S-Video] input port, or 480i, 576i, 1080i signals are being input from the
[Component] / [HDMI1] / [HDMI2] input port.)
Interlace
(i) signals are converted to progressive (p) signals using a method appropriate for the image.
Video :This is ideal for general video images.
Film :This is ideal for film images. Select this if the setting is "Auto" and flickering appears in
the film images.
Auto :Optimum conversion is performed for movie, computer graphics, and animation input
signals.
(This can be set only when signals are being input from the [Video] / [S-Video] input port, or 480i, 576i,
1080i signals are being input from the [Component] / [HDMI1] / [HDMI2] input port.)
Select whether the progressive conversion operation mode is for fast-moving images or for slow-moving
images. The smaller the value, the more suitable the mode is for viewing still images. The larger the
value, the more suitable the mode is for viewing video images.
Setting is not possible when "4-4 pull-down" is set to "On". Set to "Off" if noise occurs at the "Low",
"Normal" or "High" setting. The current and previous frames are compared, and the frame in the middle
of them is interpolated to reduce fuzziness and to produce clearer moving images. The degree of
interpolation can be set to "Low", "Normal" or "High" as desired.
Displayed for input sources other than computer image
Only displayed for Computer image input (does not appear when signals from the [HDMI1] /[HDMI2] input port are being input)
Tracking
*1
Sync.
*1
Position
*1
Progressive
*1
(EH-TW3500/TW2900 only)
Progressive
*1
(EH-TW4500/TW4400 only)
Motion Detection
*1
(EH-TW3500/TW2900 only)
Frame Interpolation (EH-TW4500/TW4400 only)
*1 The setting values are stored separately for each image source and signal type.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EH-TW2900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EH-TW2900 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EH-TW2900

Epson EH-TW2900 User Manual - German - 65 pages

Epson EH-TW2900 User Manual - Dutch - 66 pages

Epson EH-TW2900 User Manual - Dutch - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info