617841
109
Zoom out
Zoom in
Previous page
1/135
Next page
Troubleshooting
108
The Panel Alignment adjustment is not satisfactory or difficult to achieve
Check Remedy
Does the Projection setting match the pro-
jector's installation position?
The panel alignment adjustment method changes depending
on the Projection setting. Make sure the Projection setting
matches the projector's installation position.
s Settings - Pro-
jection p.90
Is the projection surface suitable? For best results, the projection surface should not be colored or
textured, otherwise the adjustment grids will be difficult to align.
Project onto a screen and so on that is white and does not have
a pattern.
Were adjustments made immediately after
the projector was turned on?
To obtain stable image quality, leave the projector on for a while
before making adjustments.
Is the image size suitable? The projected image should be a minimum of 60".
Is the shifted color magenta?
Adjust R (red) and B (blue) for Select Color since magenta is a
mixture of red and blue.
Do the lines in the pattern look fuzzy or out of
focus?
Adjust the focus.
s p.32
Problems when projection starts
The projector does not turn on
Check Remedy
Is the power turned on?
Press the
button on the remote control or the button
on the control panel.
Is Child Lock set to On? When Child Lock is set to On from the Configuration menu, hold
down the
button on the control panel for approximately
three seconds, or perform operations from the remote control.
s Settings - Lock Setting - Child Lock p.90
Do the indicators turn on and off when the
power cord is touched?
Turn off the projector, and then disconnect and reconnect the
projector's power cord. If the problem continues, stop using the
projector, remove the power plug from the electrical outlet, and
contact your local dealer or the nearest projector information
center.
s Epson Projector Contact List
Problems with the remote control
The remote control does not respond
Check Remedy
Is the remote control light-emitting area
pointing towards the remote receiver on the
projector during operation?
Point the remote control towards the remote receiver. Also,
check the operating range.
s p.25
Is the remote control too far from the projec-
tor?
Check the operating range.
s p.25
Is direct sunlight or strong light from fluores-
cent lamps shining onto the remote receiver?
Set the projector up in a location where strong light does not
shine onto the remote receiver.
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EH-LS10000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EH-LS10000 in the language / languages: English as an attachment in your email.

The manual is 9,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EH-LS10000

Epson EH-LS10000 User Manual - German - 133 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info