771251
19
Zoom out
Zoom in
Previous page
1/157
Next page
Light Status Solutions
The printer was not turned o correctly.*
Because the printer was turned o while
operating, the nozzles may have dried
and clogged.
* The power was turned o with a power
strip or breaker, the plug was pulled out of
the outlet, or an electrical failure occurred.
After clearing the error by pressing the button,
we recommend performing a nozzle check. Cancel
any pending print jobs.
To turn o the printer, make sure you press the
P
button.
When the
H
light and the
b
light ash
simultaneously
An ink pad is nearing or at the end of its
service life.
The ink pads need to be replaced.
Contact Epson or an authorised Epson service
provider to replace the ink pad
*1
. It is not a user-
serviceable part.
When a message saying that you can continue
printing is displayed on the computer, press the
button to continue printing. The lights stop ashing
for the time being, however, they will continue to
ash at regular intervals until the ink pad is replaced.
When the
H
light and the
b
light ash
alternately
A borderless printing ink pad is nearing or at
the end of its service life.
The borderless printing ink pad need to be replaced.
Contact Epson or an authorised Epson service
provider to replace the ink pad
*2
. It is not a user-
serviceable part.
When a message saying that you can continue
printing is displayed on the computer, press the
button to continue printing. The lights stop ashing
for the time being, however, they will continue to
ash at regular intervals until the ink pad is replaced.
Borderless printing is not available, but printing with
a border is available.
The printer has started in recovery mode
because the rmware update failed.
Follow the steps below to try to update the rmware
again.
1. Connect the computer and the printer with a USB
cable. (During recovery mode, you cannot update the
rmware over a network connection.)
2. Visit your local Epson website for further
instructions.
A printer error has occurred. Remove any paper inside the printer. Turn the power
o and on again.
If the error continues to occur after turning the power
o and on again, contact Epson support.
*1 In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage
from the pad, the printer is designed to stop printing when the pad has reached its limit. Whether and how oen
this is required will vary according to the number of pages you print, the type of material that you print and the
number of cleaning cycles that the printer performs. e need for replacement of the pad does not mean that your
printer has ceased to operate in accordance with its specications. e printer will advise you when the pad
Guide to the Control Panel
>
Checking Lights and Printer Status
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Ecotank L1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Ecotank L1250 in the language / languages: English as an attachment in your email.

The manual is 3.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson Ecotank L1250

Epson Ecotank L1250 Quick start guide - English - 2 pages

Epson Ecotank L1250 Quick start guide - German - 2 pages

Epson Ecotank L1250 User Manual - German - 163 pages

Epson Ecotank L1250 Quick start guide - Dutch - 2 pages

Epson Ecotank L1250 User Manual - Dutch - 162 pages

Epson Ecotank L1250 User Manual - French - 162 pages

Epson Ecotank L1250 Quick start guide - French - 2 pages

Epson Ecotank L1250 Quick start guide - Italian - 2 pages

Epson Ecotank L1250 Quick start guide - Turkish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info