543654
32
Zoom out
Zoom in
Previous page
1/130
Next page
When an ID is set for the projector and the remote control, you can
use the remote control to operate only the projector with a matching
ID. This is very useful when managing multiple projectors.
You can set an ID for the projector within a range of "1" to "9". The
default value is Off.
You can set an ID for the remote control within a range of "0" to "9".
The default value is "0". When the ID switch on the side of the remote
control is set to Off, you can operate all projectors by the remote
control regardless of the ID setting for the projector or the remote control.
The following table shows the possible combinations of projector ID
and remote control ID.
Opera-
tion
Combinations Descriptions
Possible
Projector ID: 1 When the control switch is
set to On, and Projector ID
matches the remote control
ID, you can operate the
projector with the remote
control.
ID switch: On
Remote control ID: 1
Possible
Projector ID: 1 When the ID switch on the
side of the remote control is
set to Off, you can operate
the projector with the
remote control regardless of
the projector's ID setting.
ID switch: Off
Remote control ID: 3
Possible
Projector ID: Off When the Projector ID is
Off, you can operate with
the remote control
regardless of the remote
control ID setting.
ID switch: On
Remote control ID: 1
Opera-
tion
Combinations Descriptions
Possible
Projector ID: 1 When the remote control ID
is "0", you can operate with
the remote control
regardless of the Projector
ID setting.
ID switch: On
Remote control ID: 0
Not possi-
ble
Projector ID: 1 When the remote control
switch is On, and Projector
ID and remote control ID do
not match, you cannot
operate with the remote
control.
ID switch: On
Remote control ID: 3
When Remote Control Type is set to Simple from Operation in the
configuration menu, you cannot set the remote control ID.
Limitation of the Number of the Target Projectors when Using Multiple Projectors
32
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB Z8000WU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB Z8000WU in the language / languages: English as an attachment in your email.

The manual is 5,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info