Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
Are the contents of the moving image you are trying to project
copyright protected?
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player and so on.
Projection stops automatically
CheckRemedy
Are Sleep Mode, Lens Cover Timer, or A/V Mute Timer set to
On?
If any of these are set to On, the power turns off automatically in the following situations.
•When Sleep Mode is set to On: If no operations are performed for a specified length of time while no image signal is
being input.
•When Lens Cover Timer is set to On: If approximately 30 minutes has passed since the lens cover was closed.
•When A/V Mute Timer is set to On: If approximately 30 minutes has passed since the A/V mute was enabled.
To prevent the projector from switching off automatically, make sure each setting is set to Off.
s "ECO Menu" p.99
Is the computer in power-saving mode?If the computer is in power-saving mode and no operations are performed for a specified period of time, the image may
disappear. Perform an operation on the computer to display the image again.
The message "Not supported" is displayed
CheckRemedy
Is the image signal format setting correct?
(Only when projecting images from a video source)
Change the setting according to the signal for the connected equipment.
sSignal - Video Signalp.86
Do the image signal resolution and the refresh rate correspond to the
mode?
(Only when projecting computer images)
Refer to the computer's documentation for how to change the image signal resolution and the refresh rate output from
how do you get to open a epson eb x20 Ive taken all the screws out of the bottom the side come away from the base but for some reason the top of the case will not come off,Ive check about four to five times to see if I have left any screws in but there isnt please someone help
Submitted on 25-7-2021 at 03:35
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Epson EB-X20 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Epson EB-X20 in the language / languages: English as an attachment in your email.
The manual is 11,23 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
