617826
140
Zoom out
Zoom in
Previous page
1/166
Next page
140
Solving Image or Sound Problems
• "Correcting the Image Shape with Quick Corner" p.43
a
Open the System Preferences utility and select Displays.
• Check your computer display settings to disable dual display and set the
resolution within the projector's limits. (See your computer manual for
b
Select the Display or Color LCD option, if necessary. details.)
• Check the resolution assigned to your presentation files to see if they are
c
Click the Arrange or Arrangement tab.
created for a different resolution. (See your software help for details.)
• Make sure you selected the correct projection mode. You can select Front,
d
Select Mirror Displays.
Front/Ceiling, Rear, or Rear/Ceiling as the Projection setting in the
projector's Extended menu.
gg Related Links
Solutions When "Not Supported" Message Appears
• "Input Signal Settings - Signal Menu" p.103
If the message "Not supported" is displayed, try the following solutions:
• "Projector Setup Settings - Extended Menu" p.107
• "Supported Monitor Display Resolutions" p.153
• Make sure the correct input signal is selected on the projector's Signal
menu.
• Make sure the computer's display resolution does not exceed the projector's
Solutions When the Image is not Rectangular
resolution and frequency limits. If necessary, select a different display
If the projected image is not evenly rectangular, try the following solutions:
resolution for your computer. (See your computer manual for details.)
• Place the projector directly in front of the center of the screen, facing it
gg Related Links
squarely, if possible.
• "Input Signal Settings - Signal Menu" p.103
• If you adjusted the projector height using the projector feet, press the
keystone buttons on the projector to adjust the image shape.
Solutions When Only a Partial Image Appears
• Turn on horizontal keystone slider in the projector's Settings menu. Then,
adjust the slider until the image is evenly rectangular.
If only a partial computer image appears, try the following solutions:
s Settings > Keystone > H/V-Keystone > H-Keystone Adjuster
• Press the [Auto] button on the remote control to optimize the image signal.
• Turn on automatic adjustment in the projector's Settings menu. The
• Try adjusting the image position using the Position setting in the
projector automatically corrects the image every time you move the
projector's Signal menu.
projector.
• Press the [Aspect] button on the remote control to select a different image
s Settings > Keystone > H/V-Keystone > Auto V-Keystone
aspect ratio.
• Adjust the Quick Corner setting to correct the image shape.
• Change the Resolution setting in the projector's Signal menu according to
s Settings > Keystone > Quick Corner
the signal for the connected equipment.
gg Related Links
• If you zoomed into or out of the image using the [E-Zoom] buttons, press
• "Auto V-Keystone" p.41
the [Esc] button until the projector returns to a full display.
• "Correcting the Image Shape with the Keystone Buttons" p.42
140


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-U130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-U130 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-U130

Epson EB-U130 User Manual - German - 169 pages

Epson EB-U130 User Manual - Dutch - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info