617816
2
Zoom out
Zoom in
Previous page
1/166
Next page
User's Guide
2
Contents
Image Aspect Ratio .......................................................................... 51
Connecting to a Composite Video Source..................................................................... 26
Notations Used in This Guide 6
Connecting to External USB Devices ..................................................................................... 27
USB Device Projection ........................................................................................................... 27
Connecting to a USB Device ............................................................................................... 27
Introduction to Your Projector 7
Disconnecting a USB Device ............................................................................................... 28
Connecting to a Document Camera ...................................................................................... 28
Projector Features.............................................................................. 8
Quick and Easy Setup..................................................................................................................... 8
Installing Batteries in the Remote Control.................................... 29
Easy Wireless Projection................................................................................................................ 8
Remote Control Operation.............................................................. 30
Flexible Connectivity ...................................................................................................................... 9
Opening the Lens Cover .................................................................. 31
Connect with Computers........................................................................................................ 9
Connect with Mobile Devices............................................................................................. 10
Projector Parts and Functions ........................................................ 11
Using Basic Projector Features 32
Projector Parts - Front.................................................................................................................. 11
Projector Parts - Rear.................................................................................................................... 12
Turning On the Projector ................................................................ 33
Projector Parts - Base ................................................................................................................... 13
Home Screen................................................................................................................................... 34
Projector Parts - Control Panel................................................................................................. 14
Turning Off the Projector ................................................................ 36
Projector Parts - Remote Control ............................................................................................ 15
Selecting the Language for the Projector Menus ......................... 37
Projection Modes ............................................................................. 38
Setting Up the Projector 18
Changing the Projection Mode Using the Remote Control.......................................... 38
Changing the Projection Mode Using the Menus ............................................................ 38
Projector Placement ........................................................................ 19
Projector Setup and Installation Options............................................................................. 19
Adjusting the Image Height............................................................ 40
Projection Distance....................................................................................................................... 20
Image Shape..................................................................................... 41
Projector Connections ..................................................................... 21
Auto V-Keystone ............................................................................................................................ 41
Connecting to a Computer........................................................................................................ 21
Correcting the Image Shape with the Horizontal Keystone Slider............................. 41
Connecting to a Computer for VGA Video and Audio.............................................. 21
Correcting the Image Shape with the Keystone Buttons .............................................. 42
Connecting to a Computer for USB Video and Audio............................................... 22
Correcting the Image Shape with Quick Corner ............................................................... 43
Connecting to a Computer for HDMI Video and Audio ........................................... 23
Resizing the Image with the Zoom Ring........................................ 46
Connecting to Smartphones or Tablets................................................................................ 23
Resizing the Image with the Buttons ............................................. 47
Connecting to Video Sources ................................................................................................... 24
Connecting to an HDMI Video Source ............................................................................ 24
Focusing the Image Using the Focus Ring..................................... 48
Connecting to a Component-to-VGA Video Source .................................................. 25
Selecting an Image Source.............................................................. 49
Connecting to an S-Video Video Source ........................................................................ 26
3
Contents
Matching Multiple-Projector Display Quality ..................................................................... 75
Changing the Image Aspect Ratio.......................................................................................... 51
Projector Security Features............................................................. 76
Available Image Aspect Ratios ................................................................................................. 51
Password Security Types ............................................................................................................ 76
Projected Image Appearance with Each Aspect Mode .................................................. 52
Setting a Password.................................................................................................................. 76
Selecting Password Security Types................................................................................... 77
Color Mode ....................................................................................... 53
Entering a Password to Use the Projector ..................................................................... 78
Changing the Color Mode ......................................................................................................... 53
Locking the Projector's Buttons............................................................................................... 78
Available Color Modes................................................................................................................. 53
Unlocking the Projector's Buttons .................................................................................... 79
Setting Auto Iris ............................................................................................................................. 53
Installing a Security Cable.......................................................................................................... 80
Controlling the Volume with the Volume Buttons ....................... 55
Using the Projector on a Network 81
Adjusting Projector Features 56
Wireless Network Projection........................................................... 82
Projecting Two Images Simultaneously ........................................ 57
Installing the Wireless LAN Module ....................................................................................... 82
Unsupported Input Source Combinations for Split Screen Projection..................... 58
Selecting Wireless Network Settings Manually.................................................................. 83
Split Screen Projection Restrictions........................................................................................ 59
Selecting Wireless Network Settings in Windows ............................................................ 85
Projecting a PC Free Presentation.................................................. 60
Selecting Wireless Network Settings in OS X...................................................................... 85
Supported PC Free File Types................................................................................................... 60
Setting Up Wireless Network Security................................................................................... 85
Precautions on PC Free Projection ......................................................................................... 60
Using a QR Code to Connect a Mobile Device............................... 87
Starting a PC Free Slide Show .................................................................................................. 61
Using Quick Wireless Connection (Windows Only)....................... 89
Starting a PC Free Movie Presentation ................................................................................. 62
PC Free Display Options ............................................................................................................. 63
Monitoring and Controlling the Projector 90
Shutting Off the Image and Sound Temporarily .......................... 65
Stopping Video Action Temporarily .............................................. 66
EasyMP Monitor ............................................................................... 91
Zooming Images............................................................................... 67
Controlling a Networked Projector Using a Web Browser........... 92
Using the Remote Control as a Wireless Mouse............................ 68
Setting Up Projector Network E-Mail Alerts.................................. 94
Using the Remote Control as a Pointer.......................................... 70
Network Projector E-mail Alert Messages............................................................................ 94
Saving a User's Logo Image ............................................................ 71
Setting Up Monitoring Using SNMP............................................... 95
Color Difference Correction when Projecting from Multiple
Using ESC/VP21 Commands ........................................................... 96
Projectors.......................................................................................... 73
Setting Up for Using ESC/VP21 Commands........................................................................ 96
Setting the Projector ID .............................................................................................................. 73
ESC/VP21 Command List............................................................................................................ 96
Selecting the Projector You want to Operate .................................................................... 73
Communications Protocol ......................................................................................................... 96
4
Contents
Solving Network Problems ........................................................... 146
Air Filter and Vent Maintenance .................................................. 125
Adjusting the Menu Settings 98
Cleaning the Air Filter and Vents.......................................................................................... 125
Replacing the Air Filter ............................................................................................................. 125
Using the Projector's Menus ........................................................... 99
Projector Lamp Maintenance ....................................................... 127
Using the On-screen Keyboard..................................................... 100
Replacing the Lamp................................................................................................................... 127
Available Text Using the On-screen Keyboard................................................................ 100
Resetting the Lamp Timer ....................................................................................................... 130
Image Quality Settings - Image Menu ......................................... 101
Replacing the Remote Control Batteries ..................................... 132
Input Signal Settings - Signal Menu............................................. 103
Projector Feature Settings - Settings Menu ................................ 105
Solving Problems 133
Projector Setup Settings - Extended Menu ................................. 107
Projection Problems ...................................................................... 134
Projector Network Settings - Network Menu.............................. 109
Network Menu - Basic Menu .................................................................................................. 109
Projector Indicators Status ........................................................... 135
Network Menu - Wireless LAN Menu .................................................................................. 110
Using the Projector Help Displays................................................ 137
Network Menu - Security Menu ............................................................................................ 111
Solving Image or Sound Problems............................................... 138
Network Menu - Mail Menu .................................................................................................... 112
Solutions When No Image Appears..................................................................................... 138
Network Menu - Others Menu............................................................................................... 113
Solutions When Image is Incorrect Using the USB Display Function ..................... 138
Network Menu - Reset Menu.................................................................................................. 113
Solutions When "No Signal" Message Appears............................................................... 139
Projector Setup Settings - ECO Menu .......................................... 115
Displaying From a Laptop.................................................................................................. 139
Projector Information Display - Info Menu ................................. 116
Displaying From a Mac Laptop........................................................................................ 139
Info Menu - Projector Info Menu .......................................................................................... 116
Solutions When "Not Supported" Message Appears .................................................... 140
Event ID Code List................................................................................................................. 117
Solutions When Only a Partial Image Appears................................................................ 140
Solutions When the Image is not Rectangular................................................................ 140
Projector Reset Options - Reset Menu ......................................... 118
Solutions When the Image Contains Noise or Static..................................................... 141
Copy Menu Settings to Another Projector (Batch Setup).......... 119
Solutions When the Image is Fuzzy or Blurry .................................................................. 141
Performing Batch Setup Using a USB Flash Drive.......................................................... 119
Solutions When the Image Brightness or Colors are Incorrect ................................. 142
Performing Batch Setup Using a USB Cable..................................................................... 120
Solutions to Sound Problems................................................................................................. 142
Batch Setup Error Notification ......................................................................................... 121
Solutions When Image File Names are not Displayed Correctly in PC Free......... 143
Solving Projector or Remote Control Operation Problems....... 144
Maintaining the Projector 122
Solutions to Projector Power or Shut-Off Problems...................................................... 144
Solutions to Problems with the Remote Control............................................................ 144
Cleaning the Lens........................................................................... 123
Solutions to Password Problems........................................................................................... 145
Cleaning the Projector Case.......................................................... 124
5
Contents
Copyright Attribution................................................................................................................ 166
Solutions When You Cannot Access the Projector Through the Web ................... 146
Solutions When Network Alert E-Mails are not Received............................................ 146
Solutions When the Image Contains Static During Network Projection............... 146
Appendix 147
Optional Accessories and Replacement Parts............................. 148
Optional Accessories ................................................................................................................. 148
Replacement Parts...................................................................................................................... 148
Screen Size and Projection Distance............................................ 149
Supported Monitor Display Resolutions ..................................... 153
Projector Specifications ................................................................ 155
Connector Specifications ......................................................................................................... 156
External Dimensions...................................................................... 157
USB Display System Requirements .............................................. 159
List of Safety Symbols (corresponding to IEC60950-1 A2) ........ 160
Glossary .......................................................................................... 162
Notices ............................................................................................ 164
FCC Compliance Statement.................................................................................................... 164
Indication of the manufacturer and the importer in accordance with
requirements of EU directive.................................................................................................. 165
Restriction of Use........................................................................................................................ 165
Operating System References................................................................................................ 165
Trademarks.................................................................................................................................... 165
Copyright Notice......................................................................................................................... 166
Notations Used in This Guide
Safety Symbols
The projector and its manuals use graphical symbols and labels to indicate content that tells you how to use the projector safely.
Read and carefully follow the instructions that are marked with these symbols and labels to avoid injury to persons or damage to property.
This symbol indicates information that, if ignored, could possibly result in personal injury or even death.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
Caution
General Information Notations
This label indicates procedures that may result in damage or injury if sufficient care is not taken.
Attention
This label indicates additional information that may be useful to know.
[Button name] Indicates the name of the buttons on the remote control or the control panel.
Example: [Esc] button
Menu/Setting name Indicates projector menu and setting names.
Example:
Select the Image menu
s Image > Advanced
This label indicates links to the related pages.
This label indicates a page where detailed information regarding a topic can be found.
s
Introduction to Your Projector
Refer to these sections to learn more about your projector's features and part names.
gg Related Links
• "Projector Features" p.8
• "Projector Parts and Functions" p.11
8
Projector Features
• "Correcting the Image Shape with Quick Corner" p.43
This projector has a quick and easy setup, and flexible connectivity features.
Easy Wireless Projection
gg Related Links
• EasyMP Network Projection to share the projector over the network and
• "Quick and Easy Setup" p.8
project images from any of the computers on the network.
• "Easy Wireless Projection" p.8
See the EasyMP Network Projection Operation Guide for details.
• "Flexible Connectivity" p.9
Quick and Easy Setup
• Direct Power On feature to turn on the projector as soon as you plug it in.
• Auto Power On feature to turn on the projector when the projector detects
an image signal from the port you specified as the Auto Power On source.
• Home screen feature to easily select an input source and useful functions.
• Real-time, automatic vertical keystone correction always displays a
rectangular screen (Auto V-Keystone).
• Horizontal keystone adjuster allows you to quickly correct horizontal
distortion in the projected image.
• Epson iProjection to connect your projector and mobile device wirelessly
using the app available on App Store or Google play.
Any fees incurred when communicating with the App Store or
Google play are the responsibility of the customer.
a
• EasyMP Multi PC Projection to project up to four images at the same time
by splitting the projected screen. You can project images from computers
on the network, or from smartphones or tablet devices on which Epson
gg Related Links
iProjection is installed.
• "Auto V-Keystone" p.41
• "Projector Setup Settings - Extended Menu" p.107
• "Turning On the Projector" p.33
• "Correcting the Image Shape with the Horizontal Keystone Slider" p.41
9
Projector Features
gg Related Links
See the EasyMP Multi PC Projection Operation Guide for details.
• "Wireless Network Projection" p.82
• "Using a QR Code to Connect a Mobile Device" p.87
Flexible Connectivity
This projector supports a wide variety of easy-to-use connectivity options as
shown below.
gg Related Links
• "Connect with Computers" p.9
• "Connect with Mobile Devices" p.10
Connect with Computers
Connect with one USB cable to project images and output audio (USB
Display).
When projecting images using a wireless LAN, you must install the
Epson 802.11b/g/n wireless LAN module, and then set up your
a
projector and computer for wireless projection (EB-W31/EB-
X36/EB-X31/EB-S31/EB-U04/EB-W04/EB-X04/EB-S04/EB-
U130/EB-W130/EB-X130/EB-S130/EB-X350/EB-X300/EB-S300).
The Epson 802.11b/g/n wireless LAN module may not be included
with your projector.
Some models have built-in wireless LAN modules (EB-U32/EB-
W32).
You can download the necessary software and manuals from the
following Web site:
http://www.epson.com/
10
Projector Features
Connect with Mobile Devices
• HDMI/MHL port to connect an MHL cable to the mobile device and to the
projector.
11
Projector Parts and Functions
The following sections explain the projector parts and their functions.
Name Function
A
Air exhaust vent Exhaust vent for air used to cool the projector
gg Related Links
internally.
• "Projector Parts - Front" p.11
• "Projector Parts - Rear" p.12
Warning
• "Projector Parts - Base" p.13
• "Projector Parts - Control Panel" p.14
Do not look into the vents. If the lamp
explodes, gases may escape and small
• "Projector Parts - Remote Control" p.15
fragments of glass may be scattered which
could cause an injury. Contact a doctor if any
fragments of broken glass are inhaled or get
Projector Parts - Front
into the eyes or mouth.
All of the features in this guide are explained using illustrations of EB-W04
unless otherwise mentioned.
Caution
While projecting, do not put your face or
hands near the air exhaust vent, and do not
place objects that may become warped or
damaged by heat near the vent. Hot air from
the air exhaust vent could cause burns,
warping, or accidents to occur.
B
A/V Mute slide lever Slide the knob to open and close the lens cover.
C
Foot release lever Press the foot release lever to extend and retract the
front adjustable foot.
D
Lens cover Close when not using the projector to protect the lens.
By closing it during projection you can hide the image
and the sound.
E
Front adjustable foot When the projector is set up on a surface such as a
desk, extend the foot to adjust the position of the
image.
F
Lens Images are projected from here.
G
Remote receiver Receives signals from the remote control.
H
Horizontal keystone Corrects horizontal distortion in the projected image.
adjuster
I
Air intake vent (air Takes in air to cool the projector internally.
filter)
J
Air filter cover Open to access the air filter.
12
Projector Parts and Functions
EB-U32/EB-U04/EB-U130
Name Function
K
Security slot The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
L
Control panel Operates the projector.
M
Zoom ring Adjusts the image size.
(EB-U32/EB-
W32/EB-W31/EB-
X36/EB-X31/EB-
U04/EB-W04/EB-
X04/EB-U130/EB-
W130/EB-X130/EB-
X350/EB-X300)
N
Focus ring Adjusts the image focus.
O
Lamp cover Open to access the projector's lamp.
Name Function
A
Power inlet Connects the power cord to the projector.
gg Related Links
B
Wireless LAN module Secures the wireless LAN module cover.
• "Projector Indicators Status" p.135
fixing screw
• "Resizing the Image with the Zoom Ring" p.46
(EB-W31/EB-
• "Focusing the Image Using the Focus Ring" p.48
X36/EB-X31/EB-
S31/EB-W04/EB-
X04/EB-S04/EB-
Projector Parts - Rear
W130/EB-X130/EB-
S130/EB-X350/EB-
EB-W32/EB-W31/EB-X36/EB-X31/EB-S31/EB-W04/EB-X04/EB-S04/EB-
X300/EB-S300)
W130/EB-X130/EB-S130/EB-X350/EB-X300/EB-S300
C
Audio ports Inputs audio from equipment connected to the
Computer, S-Video, or Video port.
D
Video port Inputs composite video signals from video sources.
E
Remote receiver Receives signals from the remote control.
F
Speaker Outputs audio.
13
Projector Parts and Functions
gg Related Links
Name Function
• "Using the Remote Control as a Wireless Mouse" p.68
G
HDMI port Inputs video signals from HDMI compatible video
• "Installing a Security Cable" p.80
equipment and computers.
(EB-X36/EB-X31/EB-
• "Projecting a PC Free Presentation" p.60
S31/EB-W04/EB- The HDMI/MHL port can also input video signals
X04/EB-S04/EB- from MHL (Mobile High-Definition) compatible
W130/EB-X130/EB- mobile devices.
Projector Parts - Base
S130/EB-X350/EB-
This projector is compatible with HDCP.
X300/EB-S300)
HDMI/MHL port
(EB-W32/EB-W31)
HDMI1,
HDMI2/MHL port
(EB-U32/EB-U04/EB-
U130)
H
Computer port Inputs image signals from a computer and component
video signals from other video sources.
I
S-Video port For S-video signals from video sources.
(EB-W32/EB-
W31/EB-X36/EB-
X31/EB-S31/EB-
W04/EB-X04/EB-
S04/EB-W130/EB-
X130/EB-S130/EB-
X350/EB-X300/EB-
S300)
J
USB-B port Connects a USB cable to the computer to project
computer images or to use the Wireless Mouse
function.
K
USB-A port Connects a USB memory device or a digital camera
and projects movies or images using PC Free.
Connects the optional Document Camera.
Connects the wireless LAN module (EB-W31/EB-
Name Function
X36/EB-X31/EB-S31/EB-U04/EB-W04/EB-X04/EB-
S04/EB-U130/EB-W130/EB-X130/EB-S130/EB-
A
Ceiling mount fixing Attach the optional ceiling mount here when
X350/EB-X300/EB-S300).
points (three points) suspending the projector from a ceiling.
Connects the optional Quick Wireless Connection USB
B
Security cable Pass a commercially available wire lock through here
Key.
attachment point and lock it in place.
14
Projector Parts and Functions
Name Function Name Function
C
Rear feet When the projector is set up on a surface such as a
B
[Enter] button [ ] Enters the current selection and moves to the next level
desk, turn to extend and retract the feet to adjust the while displaying the projector's menu or help.
horizontal tilt.
Optimizes Tracking, Sync., and Position in the
projector's Signal menu while projecting an analog
D
Front adjustable foot When the projector is set up on a surface such as a
RGB signal from the Computer port.
desk, extend the foot to adjust the position of the
image. From now on, referred to as the [Enter] button.
C
Keystone adjustment Displays the Keystone screen allowing you to correct
buttons and arrow keystone distortion.
gg Related Links
buttons
Selects menu items while displaying the projector's
• "Installing a Security Cable" p.80
menu or help.
D
[Esc] button Stops the current function.
Projector Parts - Control Panel
Moves back to the previous menu level while
displaying the projector's menu.
E
Volume buttons and
EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-
arrow buttons
U04/EB-W04/EB-X04/EB-U130/EB-W130/EB-
Wide/Tele buttons
X130/EB-X350/EB-X300:
: Decreases the volume.
: Increases the volume.
EB-S31/EB-S04/EB-S130/EB-S300:
: Enlarges the size of the projected image.
: Reduces the size of the projected image.
Corrects keystone distortion in the horizontal direction
when the Keystone screen is displayed.
Selects menu items while displaying the projector's
menu or help.
Name Function
F
[Menu] button Displays and closes the projector's menu.
A
[Source Search] Changes to the next input source.
button
G
[Home] button Displays and closes the Home screen.
H
Turns the projector on or off.
Power button [ ]
From now on, referred to as the power button.
I
Indicators Indicates the projector's status.
15
Projector Parts and Functions
gg Related Links
Projector Parts - Remote Control
• "Home Screen" p.34
• "Input Signal Settings - Signal Menu" p.103
• "Projector Indicators Status" p.135
• "Correcting the Image Shape with the Keystone Buttons" p.42
16
Projector Parts and Functions
Name Function Name Function
A
Turns the projector on or off.
P
[Home] button Displays and closes the Home screen.
Power button [ ]
From now on, referred to as the power button.
Q
[Freeze] button Pauses or resumes images.
B
[Computer] button Selects the Computer port as the image source.
R
[Volume] up/down Adjusts the speaker volume.
buttons
C
[Video] button Switches the image source between the S-Video, Video
and HDMI port.
S
[Pointer] button Displays the on-screen pointer.
D
Numeric buttons Enters numbers in the projector's menu while holding
T
[Esc] button Stops the current function.
down the [Num] button.
Moves back to the previous menu level while
E
[Auto] button Optimizes Tracking, Sync., and Position in the displaying the projector's menu.
projector's Signal menu while projecting an analog
Acts as a mouse's right button when using the Wireless
RGB signal from the Computer port.
Mouse function.
F
[Aspect] button Changes the aspect mode.
U
[ID] button Hold down this button and press the numeric buttons
to select the ID for the projector you want to operate
G
[Num] button Hold down this button to enter numbers using the
using the remote control.
numeric buttons.
V
[Color Mode] button Changes the color mode.
H
[Menu] button Displays and closes the projector's menu.
W
[MHL Menu] button Displays the settings menu for the device linked to the
I
Arrow buttons Selects menu items while displaying the projector's
projector's HDMI/MHL port.
menu or help.
X
[LAN] button Switches the image source between the network
J
[Enter] button [ ] Enters the current selection and moves to the next level
connected devices.
while displaying the projector's menu or help.
Acts as a mouse's left button when using the Wireless
Y
[USB] button Switches the image source between the USB Display
Mouse function. and USB-A port.
From now on, referred to as the [Enter] button.
Z
[Source Search] Changes to the next input source.
button
K
[User] button Performs settings assigned in the User Button setting
in the projector's Settings menu.
a
Remote control light Outputs remote control signals.
emitting area
L
[Page] up/down Controls page up and down on your computer when
buttons you connect a projector and computer using a USB
cable or over a network.
gg Related Links
Displays the previous or next screen while using the PC
• "Image Aspect Ratio" p.51
Free feature.
• "Color Mode" p.53
M
[E-Zoom +/–] Zooms in or zooms out the image area.
• "Input Signal Settings - Signal Menu" p.103
buttons
• "Projector Setup Settings - Extended Menu" p.107
N
[A/V Mute] button Turns the video and audio on or off temporarily.
• "Projecting Two Images Simultaneously" p.57
• "Using the Remote Control as a Wireless Mouse" p.68
O
[Split] button Projects two images from different image sources
simultaneously by splitting the projected screen.
• "Using the Remote Control as a Pointer" p.70
17
Projector Parts and Functions
• "Using the Projector on a Network" p.81
• "Connecting to a Computer" p.21
• "Projecting a PC Free Presentation" p.60
Setting Up the Projector
Follow the instructions in these sections to set up your projector.
gg Related Links
• "Projector Placement" p.19
• "Projector Connections" p.21
• "Installing Batteries in the Remote Control" p.29
• "Remote Control Operation" p.30
• "Opening the Lens Cover" p.31
19
Projector Placement
You can place the projector on almost any flat surface to project an image.
If you cannot install the projector parallel to the screen, correct
keystone distortion using the projector controls.
You can also install the projector in a ceiling mount if you want to use it in a
a
fixed location. An optional ceiling mount is required when suspending the
projector from a ceiling.
Warning
Note the following points when selecting a projector location:
You must install a ceiling mount when suspending the projector from a ceiling.
• Place the projector on a sturdy, level surface or install it using a compatible
If you do not install the projector correctly, it could fall and cause damage or
mount.
injury.
Do not use adhesives on the ceiling mount fixing points to prevent the screws
from loosening, or use lubricants, oils, or similar substances on the projector; the
projector case may crack causing it to fall from its ceiling mount. This could
cause serious injury to anyone under the ceiling mount and could damage the
projector.
Do not cover the projector's air intake or air exhaust vents. If the vents are
covered, the internal temperature could rise and cause a fire.
Attention
Do not operate the projector on its side. This may cause the projector to
malfunction.
• Leave plenty of space around and under the projector for ventilation, and
If you are using the projector at altitudes above 1500 m, set the High Altitude
do not place it on top of or next to anything that could block the vents.
Mode setting to On in the projector's Extended menu to ensure the projector's
internal temperature is regulated properly.
• Position the projector within reach of a grounded electrical outlet or
s Extended > Operation > High Altitude Mode
extension cord.
• Place the projector parallel to the screen.
gg Related Links
• "Projector Setup and Installation Options" p.19
• "Projection Distance" p.20
• "Image Shape" p.41
• "Projector Setup Settings - Extended Menu" p.107
• "Optional Accessories" p.148
Projector Setup and Installation Options
You can set up or install your projector in the following ways:
20
Projector Placement
screen based on the size of the projected image.
Front/Rear
When correcting keystone distortion, your image is slightly smaller.
a
Front Ceiling/Rear Ceiling
gg Related Links
• "Screen Size and Projection Distance" p.149
When projecting from the ceiling or from the rear, make sure you select the
correct Projection option in the projector's Extended menu.
gg Related Links
• "Projection Modes" p.38
Projection Distance
The distance at which you place the projector from the screen determines the
approximate size of the image. The image size increases the farther the
projector is from the screen, but can vary depending on the zoom factor,
aspect ratio, and other settings.
See the Appendix for details about how far to place the projector from the
21
Projector Connections
cable. The VGA computer cable may not be included with your projector.
You can connect the projector to a variety of computer, video, and audio You can play sound through the projector's speaker system by connecting a
sources to display presentations, movies, or other images, with or without commercially available RCA audio cable.
sound.
To connect a Mac that includes only a Mini DisplayPort, Thunderbolt
Illustrations in this section are of EB-W04.
port, or Mini-DVI port for video output, you need to obtain an adapter
a
• Connect a computer that has a USB port, standard video output (monitor)
that allows you to connect to the projector's VGA video port. Contact
Apple for compatible adapter options.port, or HDMI port.
• For video projection, connect devices such as DVD players, gaming
consoles, digital cameras, and smartphones with compatible video output
a
Connect the VGA computer cable to your computer's monitor port.
ports.
• If your presentation or video includes sound, you can connect audio input
b
Connect the other end to a Computer port on the projector.
cables.
• For slide shows or presentations without a computer, you can connect USB
devices (such as a flash drive or camera) or the optional Epson document
camera.
gg Related Links
• "Connecting to a Computer" p.21
• "Connecting to Smartphones or Tablets" p.23
• "Connecting to Video Sources" p.24
• "Connecting to External USB Devices" p.27
• "Connecting to a Document Camera" p.28
Connecting to a Computer
c
Tighten the screws on the VGA connector.
Follow the instructions in these sections to connect a computer to the
d
Connect the audio cable to your laptop's headphone or audio-out jack,
projector.
or your desktop's speaker or audio-out port.
gg Related Links
• "Connecting to a Computer for VGA Video and Audio" p.21
• "Connecting to a Computer for USB Video and Audio" p.22
• "Connecting to a Computer for HDMI Video and Audio" p.23
Connecting to a Computer for VGA Video and Audio
You can connect the projector to your computer using a VGA computer
22
Projector Connections
b
Connect the other end to any available USB port on your computer.
e
Connect the other end to the projector's Audio ports.
c
Turn on the projector.
d
Do one of the following to install the Epson USB Display software:
You only need to install this software the first time you connect
the projector to the computer.
a
Windows 2000: Double-click Computer > EPSON_PJ_UD >
EMP_UDSE.EXE.
Windows XP: Wait as messages are displayed on your computer
screen and the projector installs the Epson USB Display software on
your computer. If it is not installed automatically, double-click My
Computer > EPSON_PJ_UD > EMP_UDSE.EXE.
Connecting to a Computer for USB Video and Audio
Windows Vista/Windows 7/Windows 8/Windows 8.1: Select Run
EMP_UDSE.EXE in the dialog box that is displayed to install the
If your computer meets the system requirements, you can send video and
Epson USB Display software.
audio output to the projector through the computer's USB port. This function
is called USB Display. The USB cable may not be included with your
OS X: The Epson USB Display setup folder is displayed on your
projector.
screen. Select USB Display Installer and follow the on-screen
instructions to install the Epson USB Display software. If the USB
Display Setup folder is not displayed automatically, double-click
If you use a USB hub, the connection may not operate correctly.
EPSON_PJ_UD > USB Display Installer.
Connect the USB cable directly to the projector.
a
e
Follow any on-screen instructions.
a
Connect the cable to your projector's USB-B port.
Do not disconnect the USB cable or turn off the projector until the
projector displays an image.
If you are using Windows 2000 or Windows XP and you see a
message asking if you want to restart your computer, select No.
a
The projector displays the image from your computer's desktop and outputs
sound if your presentation contains audio.
23
Projector Connections
b
Connect the other end to the projector's HDMI/MHL port.
b
Connect the other end to the projector's HDMI port.
If the projector does not project any images, do one of the following:
a
Windows: Click All Programs > EPSON Projector > Epson USB
Display > Epson USB Display Ver.x.xx.
OS X: Double-click the USB Display icon in the Application
folder.
When you finish projection, do one of the following:
Windows: Disconnect the USB cable. You do not need to operate
Safely Remove Hardware.
OS X: Select Disconnect from the USB Display icon menu on the
menu bar or Dock, and then disconnect the USB cable.
gg Related Links
gg Related Links
• "USB Display System Requirements" p.159
• "Projector Setup Settings - Extended Menu" p.107
Connecting to a Computer for HDMI Video and Audio
Connecting to Smartphones or Tablets
If your computer has an HDMI port, you can connect it to the projector using
a commercially available HDMI cable and send the computer's audio with the
You can connect the projector to smartphones and tablets using a
projected image.
commercially available MHL cable and send the audio with the projected
image (EB-U32/EB-W32/EB-W31/EB-U04/EB-U130).
To connect a Mac that includes only a Mini DisplayPort, Thunderbolt
port, or Mini-DVI port for video output, you need to obtain an adapter
a
You may not be able to connect an MHL cable to all devices.
that allows you to connect to the projector's HDMI port. Contact
a
You may not be able to project correctly, depending on the model
Apple for compatible adapter options. Older Mac computers (2009 and
and settings of the smartphone or tablet.
earlier) may not support audio through the HDMI port.
To check if your smartphone or tablet device supports MHL, contact
the manufacturer of your smartphone or tablet device.
a
Connect the HDMI cable to your computer's HDMI output port.
a
Connect the MHL cable to your device's MHL port.
24
Projector Connections
a
Connect the HDMI cable to your video source's HDMI output port.
EB-W32/EB-W31
If images are not projected correctly, disconnect and then reconnect
the MHL cable.
a
Connecting to Video Sources
Follow the instructions in these sections to connect video devices to the
projector.
Attention
Check the shape and orientation of the connectors on any cable you plan to
connect. Do not force a connector into a port if it does not fit. The device or your
projector could be damaged or could malfunction.
EB-U32/EB-U04/EB-U130
If the port on the device you connect has an unusual shape, use the
cable supplied with the device or an optional cable to connect to the
a
projector.
gg Related Links
• "Connecting to an HDMI Video Source" p.24
• "Connecting to a Component-to-VGA Video Source" p.25
• "Connecting to an S-Video Video Source" p.26
• "Connecting to a Composite Video Source" p.26
Connecting to an HDMI Video Source
Attention
If you connect an MHL cable that does not support the MHL standard, the
If your video source has an HDMI port, you can connect it to the projector
smartphone or tablet device may become hot, or leakage or explosion may
using a commercially available HDMI cable and send the image source's audio
happen.
with the projected image.
The connected smartphone or tablet begins charging when images are
Attention
projected. If you connect using a commercially available MHL-HDMI
Do not turn on the video source before connecting it to the projector. Doing so
conversion adapter, charging the smartphone or tablet device may not
could damage the projector.
work or you may not be able to perform operations using the
projector's remote control.
25
Projector Connections
• "Input Signal Settings - Signal Menu" p.103
b
Connect the other end to the projector's HDMI port.
b
Connect the VGA connector to a Computer port on the projector.
gg Related Links
c
Tighten the screws on the VGA connector.
• "Projector Setup Settings - Extended Menu" p.107
d
Connect the audio cable to your video source's audio-out ports.
Connecting to a Component-to-VGA Video Source
e
Connect the other end to the projector's Audio ports.
If your video source has component video ports, you can connect it to the
projector using an optional component-to-VGA video cable. Depending on
your component ports, you may need to use an adapter cable along with a
component video cable.
You can play sound through the projector's speaker system by connecting a
commercially available RCA audio cable.
Make sure the audio cable is labeled "No resistance".
a
a
Connect the component connectors to your video source's color-coded
component video output ports.
If your image colors appear incorrectly, you may need to change the Input
Signal setting in the projector's Signal menu.
The ports usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using
s Signal > Advanced > Input Signal
an adapter, connect these connectors to your component video
a
cable.
gg Related Links
26
Projector Connections
d
Connect the other end to the projector's Audio ports.
Connecting to an S-Video Video Source
If your video source has an S-Video port, you can connect it to the projector
using a commercially available S-Video cable (EB-W32/EB-W31/EB-X36/EB-
X31/EB-S31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EB-S130/EB-
X350/EB-X300/EB-S300).
You can play sound through the projector's speaker system by connecting a
commercially available RCA audio cable.
Make sure the audio cable is labeled "No resistance".
a
Connecting to a Composite Video Source
a
Connect the S-Video cable to your video source's S-Video output port.
If your video source has a composite video port, you can connect it to the
b
Connect the other end to the projector's S-Video port.
projector using a commercially available RCA-style video or A/V cable.
You can play sound through the projector's speaker system by connecting a
commercially available RCA audio cable.
Make sure the audio cable is labeled "No resistance".
a
a
Connect the cable with the yellow connector to your video source's
yellow video output port.
b
Connect the other end to the projector's Video port.
c
Connect the audio cable to your video source's audio-out ports.
27
Projector Connections
c
Connect the audio cable to your video source's audio-out ports.
Digital cameras or smartphones must be USB-mounted devices, not
TWAIN-compliant devices, and must be USB Mass Storage Class-
a
compliant.
d
Connect the other end to the projector's Audio ports.
USB hard drives must meet these requirements:
USB Mass Storage Class-compliant (not all USB Mass Storage
Class devices are supported)
Formatted in FAT or FAT32
Self-powered by their own AC power supplies (bus-powered hard
drives are not recommended)
Avoid using hard drives with multiple partitions
You can project image files on a connected USB device using PC Free.
gg Related Links
• "Projecting a PC Free Presentation" p.60
Connecting to External USB Devices
Connecting to a USB Device
Follow the instructions in these sections to connect external USB devices to
You can connect your USB device to the projector's USB-A port and use it to
the projector.
project images and other content.
gg Related Links
• "USB Device Projection" p.27
a
If your USB device came with a power adapter, plug the device into an
• "Connecting to a USB Device" p.27
electrical outlet.
• "Disconnecting a USB Device" p.28
b
Connect the USB cable (or USB flash drive or USB memory card
reader) to the projector's USB-A port shown here.
USB Device Projection
You can project images and other content without using a computer or video
device by connecting any of these devices to your projector:
• USB flash drive
• Digital camera or smartphone
• USB hard drive
• Multimedia storage viewer
28
Projector Connections
model. See the document camera manual for details.
Attention
Use the USB cable supplied with or specified for use with the device.
Do not connect a USB hub or a USB cable longer than 3 meters, or the
device may not operate correctly.
c
Connect the other end to your device, if necessary.
Disconnecting a USB Device
When you have finished presenting with a connected USB device, disconnect
the device from the projector.
a
Turn off and unplug the device, if necessary.
b
Disconnect the USB device from the projector.
Connecting to a Document Camera
You can connect a document camera to your projector to project images
viewed by the camera.
The connection method varies depending on your Epson document camera
29
Installing Batteries in the Remote Control
The remote control uses the two AA batteries that came with the projector.
Warning
Check the positions of the (+) and (–) marks inside the battery holder to
Attention
ensure the batteries are inserted the correct way. If the batteries are not used
Make sure you read the Safety Instructions before handling the batteries.
correctly, they could explode or leak causing a fire, injury, or damage to the
product.
a
Open the battery cover as shown.
c
Close the battery cover and press it down until it clicks into place.
b
Insert the batteries with the + and ends facing as shown.
30
Remote Control Operation
The remote control lets you control the projector from almost anywhere in
the room.
Make sure that you aim the remote control at the projector's receivers within
the distance and angles listed here.
Avoid using the remote control in conditions with bright fluorescent
lights or in direct sunlight, or the projector may not respond to
a
commands. If you are not going to use the remote control for a long
time, remove the batteries.
31
Opening the Lens Cover
sound, close the lens cover.
a
To open the projector's lens cover, slide the A/V Mute slide lever until
it clicks.
b
To cover the lens or temporarily turn off the projected image and
Using Basic Projector Features
Follow the instructions in these sections to use your projector's basic features.
gg Related Links
• "Turning On the Projector" p.33
• "Turning Off the Projector" p.36
• "Selecting the Language for the Projector Menus" p.37
• "Projection Modes" p.38
• "Adjusting the Image Height" p.40
• "Image Shape" p.41
• "Resizing the Image with the Zoom Ring" p.46
• "Resizing the Image with the Buttons" p.47
• "Focusing the Image Using the Focus Ring" p.48
• "Selecting an Image Source" p.49
• "Image Aspect Ratio" p.51
• "Color Mode" p.53
• "Controlling the Volume with the Volume Buttons" p.55
33
Turning On the Projector
indicator stops flashing and turns blue.
Turn on the computer or video equipment you want to use after you turn on
c
Open the projector's lens cover.
the projector.
a
Connect the power cord to the projector's power inlet and plug it into
an electrical outlet.
Try the following if you do not see a projected image.
• Verify the lens cover is open all the way.
• Turn on the connected computer or video device.
• Change the screen output from the computer when using a laptop
computer.
• Insert a DVD or other video media, and press play (if necessary).
• Press the [Source Search] button on the control panel or remote control to
The projector's power indicator turns blue. This indicates that the
detect the source.
projector is receiving power, but is not yet turned on (it is in standby
• Press the button for the desired video source on the remote control.
mode).
• If the Home screen is displayed, select the source you want to project.
b
Press the power button on the control panel or remote control to turn
on the projector.
The projector beeps and the status indicator flashes blue as the
projector warms up. Once the projector is warmed up, the status
34
Turning On the Projector
• "Projector Setup Settings - ECO Menu" p.115
Warning
Never look into the projector lens when the lamp is on. This can damage your
Home Screen
eyes and is especially dangerous for children.
During projection, do not block the light from the projector with a book or other
The Home screen feature allows you to easily select an image source and
objects. If the light from the projector is blocked, the area on which the light
access useful functions. You can display the Home screen by pressing the
shines becomes hot which could cause it to melt, burn, or start a fire. Also, the
[Home] button on the control panel or remote control. The Home screen is
lens may get hot due to the reflected light which could cause the projector to
also displayed when you turn on the projector and no signal is being input
malfunction. To stop projection, use the A/V Mute function, or turn off the
from the selected input source.
projector.
Press the arrow buttons on the control panel or remote control to select a
A mercury lamp with high internal pressure is used as the projector's light
source. If the lamp is subjected to vibrations or shocks, or if it is used for an
menu item, and then press [Enter].
overly extended length of time, the lamp may break or it may not turn on. If the
lamp explodes, gases may escape and small fragments of glass may be scattered
which could cause an injury. Be sure to observe the instructions below.
Do not disassemble or damage the lamp or subject it to any impacts.
Do not bring your face close to the projector while it is in use.
Particular care should be taken when the projector is installed to a ceiling, as
small pieces of glass may fall down when the lamp cover is removed. When
cleaning the projector or replacing the lamp yourself, be very careful not to
allow such pieces of glass to get into the eyes or mouth.
If the lamp breaks, ventilate the area immediately, and contact a doctor if any
fragments of broken glass are inhaled or get into the eyes or mouth.
When the Direct Power On setting is set to On in the projector's
Extended menu, the projector turns on as soon as you plug it in.
a
Note that the projector also turns on automatically in cases such as
recovery from a power outage.
s Extended > Operation > Direct Power On
If you select a specific port as the Auto Power On setting in the
projector's Extended menu, the projector turns on as soon as it
detects a signal or cable connection from that port. (Set Standby
A
Select the source you want to project.
Mode to Communication On in the projector's ECO menu first.)
B
Displays the QR code and projects data on a smartphone or tablet device.
s Extended > Operation > Auto Power On
C
Displays the Help screen.
D
Displays the projector's menu.
gg Related Links
• "Home Screen" p.34
E
Performs menu options assigned to Home Screen setting in the projector's
• "Projector Setup Settings - Extended Menu" p.107
Extended menu.
35
Turning On the Projector
• "Connecting to a Computer" p.21
F
Projects two images from different image sources simultaneously by splitting
the projected screen.
G
Corrects the shape of an image that is an uneven rectangle.
The Home screen disappears after 10 minutes of inactivity.
a
gg Related Links
• "Image Shape" p.41
• "Projector Setup Settings - Extended Menu" p.107
• "Using a QR Code to Connect a Mobile Device" p.87
• "Using the Projector's Menus" p.99
• "Using the Projector Help Displays" p.137
36
Turning Off the Projector
Turn off the projector after use.
c
To transport or store the projector, make sure the power indicator is
blue (but not flashing) and the status indicator is off, then unplug the
power cord.
Turn off this product when it is not in use to prolong the life of the
projector. Lamp life varies depending on the mode selected,
a
environmental conditions, and usage. Brightness decreases over time.
a
Press the power button on the control panel or remote control.
The projector displays a shutdown confirmation screen.
b
Press the power button again. (To leave it on, press any other button.)
The projector beeps twice, the lamp turns off, and the status indicator
d
Close the projector's lens cover.
turns off.
With Epson's Instant Off technology, there is no cool-down
period so you can pack up the projector for transport right away.
a
37
Selecting the Language for the Projector Menus
e
Select the language you want to use and press [Enter].
If you want to view the projector's menus and messages in another language,
f
Press [Menu] or [Esc] to exit the menus.
you can change the Language setting.
a
Turn on the projector.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Extended menu and press [Enter].
d
Select the Language setting and press [Enter].
38
Projection Modes
Mute] button for 5 seconds again.
Depending on how you positioned the projector, you may need to change the
Changing the Projection Mode Using the Menus
projection mode so your images project correctly.
Front (default setting) lets you project from a table in front of the screen.
You can change the projection mode to flip the image over top-to-bottom
and/or left-to-right using the projector menus.
Front/Ceiling flips the image over top-to-bottom to project upside-down
from a ceiling or wall mount.
a
Turn on the projector and display an image.
Rear flips the image horizontally to project from behind a translucent
screen.
b
Press the [Menu] button on the control panel or remote control.
Rear/Ceiling flips the image over top-to-bottom and horizontally to project
from the ceiling and behind a translucent screen.
gg Related Links
• "Changing the Projection Mode Using the Remote Control" p.38
• "Changing the Projection Mode Using the Menus" p.38
• "Projector Setup and Installation Options" p.19
Changing the Projection Mode Using the Remote
Control
c
Select the Extended menu and press [Enter].
You can change the projection mode to flip the image over top-to-bottom.
a
Turn on the projector and display an image.
b
Hold down the [A/V Mute] button on the remote control for 5 seconds.
The image disappears briefly and reappears flipped top-to-bottom.
c
To change projection back to the original mode, hold down the [A/V
39
Projection Modes
f
Press [Menu] or [Esc] to exit the menus.
d
Select Projection setting and press [Enter].
e
Select a projection mode and press [Enter].
40
Adjusting the Image Height
If you are projecting from a table or other flat surface and the image is too
A
Extend the rear foot
high or low, you can adjust the image height using the projector's adjustable
B
Retract the rear foot
feet. The larger the angle of tilt, the harder it becomes to focus. Locate the
projector so that it only needs to be tilted at a small angle.
If the projected image is unevenly rectangular, you need to adjust the image
a
Turn on the projector and display an image.
shape.
b
To adjust the front foot, pull up on the foot release lever and lift the
gg Related Links
front of the projector.
• "Image Shape" p.41
The foot extends from the projector. You can adjust the position up to
12 degrees.
c
Release the lever to lock the foot.
d
If the image is tilted, rotate the rear feet to adjust their height.
41
Image Shape
• "Projector Setup Settings - Extended Menu" p.107
You can project an even, rectangular image by placing the projector directly
Correcting the Image Shape with the Horizontal
in front of the center of the screen and keeping it level. If you place the
Keystone Slider
projector at an angle to the screen, or tilt it up or down, or off to the side, you
may need to correct the image shape.
You can use the projector's horizontal keystone slider to correct the shape of
gg Related Links
an image that is an uneven horizontal rectangle, such as when the projector is
• "Auto V-Keystone" p.41
placed to the side of the projection area.
• "Correcting the Image Shape with the Horizontal Keystone Slider" p.41
• "Correcting the Image Shape with the Keystone Buttons" p.42
a
Turn on the projector and display an image.
• "Correcting the Image Shape with Quick Corner" p.43
b
Adjust the slider until the image is an even rectangle.
Auto V-Keystone
When the projector is moved or tilted, Auto V-Keystone automatically
corrects any vertical keystone distortion.
When the projector is moved, it displays an adjustment screen and then
automatically corrects the projected image.
Auto V-Keystone can correct the projected image distortion in these
conditions:
After correction, your image is slightly smaller.
• Projection angle is about 30º up or down
• The Projection setting is set to Front in the projector's Extended menu
When you use the horizontal keystone slider, set H-Keystone
Adjuster to On in the projector's Settings menu.
a
s Settings > Keystone > H/V-Keystone > H-Keystone
If you do not want to use the Auto V-Keystone function, set Auto V-
Adjuster
Keystone to Off in the projector's Settings menu.
a
You can also correct the shape of the image in the horizontal
s Settings > Keystone > H/V-Keystone > Auto V-Keystone
direction by pressing the [Menu] button on the remote control
and selecting H/V-Keystone in the projector's Settings menu.
gg Related Links
s Settings > Keystone > H/V-Keystone
• "Projection Modes" p.38
• "Projector Feature Settings - Settings Menu" p.105
42
Image Shape
c
Press a keystone button to adjust the image shape.
Correcting the Image Shape with the Keystone
Buttons
You can use the projector's keystone correction buttons to correct the shape
of an image that is unevenly rectangular.
You can use keystone buttons to correct images up to 30º right, left, up, or
down.
a
Turn on the projector and display an image.
b
Press one of the keystone adjustment buttons on the control panel to
display the Keystone adjustment screen.
After correction, your image is slightly smaller.
If the projector is installed out of your reach, you can also correct
the shape of the image by pressing the [Menu] button on the
a
remote control and selecting H/V-Keystone in the projector's
Settings menu.
s Settings > Keystone > H/V-Keystone
43
Image Shape
gg Related Links
c
Select the Settings menu and press [Enter].
• "Projector Feature Settings - Settings Menu" p.105
Correcting the Image Shape with Quick Corner
You can use the projector's Quick Corner setting to correct the shape and size
of an image that is unevenly rectangular.
d
Select Keystone and press [Enter].
a
Turn on the projector and display an image.
b
Press the [Menu] button on the control panel or remote control.
44
Image Shape
control panel, the Quick Corner adjustment screen is displayed.
e
Select Quick Corner and press [Enter]. Press [Enter] again if necessary.
If you see this screen, you cannot adjust the shape any further
in the direction indicated by the gray triangle.
a
You see the Quick Corner adjustment screen.
f
Use the arrow buttons to select the corner of the image you want to
adjust. Then press [Enter].
To reset the Quick Corner corrections, hold down [Esc] for
about 2 seconds while the Quick Corner adjustment screen is
displayed, and select Reset Quick Corner. Select Switch to
H/V-Keystone to switch the image shape correction method to
H/V-Keystone.
g
Press the arrow buttons to adjust the image shape as necessary.
h
Repeat steps 6 and 7 as needed to adjust any remaining corners.
When you press [Enter], the Quick Corner adjustment screen is
displayed.
i
When you are finished, press [Esc].
The Keystone setting is now set to Quick Corner in the projector's Settings
menu. The next time you press the keystone adjustment buttons on the
45
Image Shape
• "Projector Feature Settings - Settings Menu" p.105
gg Related Links
46
Resizing the Image with the Zoom Ring
You can resize the image using the projector's zoom ring (EB-U32/EB-
W32/EB-W31/EB-X36/EB-X31/EB-U04/EB-W04/EB-X04/EB-U130/EB-
W130/EB-X130/EB-X350/EB-X300).
a
Turn on the projector and display an image.
b
Rotate the zoom ring to enlarge or reduce the image.
47
Resizing the Image with the Buttons
You can resize the image using the Wide and Tele buttons (EB-S31/EB-
S04/EB-S130/EB-S300).
a
Turn on the projector and display an image.
b
Press the Wide button on the projector's control panel to enlarge the
image size. Press the Tele button to reduce the image size.
48
Focusing the Image Using the Focus Ring
You can correct the focus using the focus ring.
EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EB-W04/EB-X04/EB-
U130/EB-W130/EB-X130/EB-X350/EB-X300
EB-S31/EB-S04/EB-S130/EB-S300
49
Selecting an Image Source
When multiple image sources are connected to the projector, such as a
This screen is displayed when no image signal is detected.
computer and DVD player, you can switch from one image source to the
Check the cable connections between the projector and image
a
other.
source.
a
Make sure the connected image source you want to use is turned on.
b
For video image sources, insert a DVD or other video media and press
play.
c
Do one of the following:
Press the [Source Search] button on the control panel or remote
control until you see the image from the source you want.
Press the button for the source you want on the remote control. If
there is more than one port for that source, press the button again to
cycle through the sources.
A
Computer port source (Computer port)
B
Video, S-Video, HDMI, and MHL sources (Video, S-Video, HDMI,
and HDMI/MHL ports)
C
USB port sources (USB-B port and external devices connected to the
USB-A port)
D
Network source (LAN)
50
Selecting an Image Source
Press the [Home] button on the control panel or remote control.
Then select the source you want to use from the screen displayed.
S-Video is available with the EB-W32/EB-W31/EB-X36/EB-
X31/EB-S31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EB-
a
S130/EB-X350/EB-X300/EB-S300.
51
Image Aspect Ratio
The projector can display images in different width-to-height ratios called
To display images without black bars, set Resolution to Wide or
aspect ratios. Normally, the input signal from your video source determines
Normal in the projector’s Signal menu according to the computer’s
a
the image's aspect ratio. However, for certain images you can change the
resolution.
aspect ratio to fit your screen by pressing a button on the remote control.
If you always want to use a particular aspect ratio for a certain video input
gg Related Links
source, you can select it using the projector's Signal menu.
• "Input Signal Settings - Signal Menu" p.103
gg Related Links
• "Changing the Image Aspect Ratio" p.51
Available Image Aspect Ratios
• "Available Image Aspect Ratios" p.51
• "Projected Image Appearance with Each Aspect Mode" p.52
You can select the following image aspect ratios, depending on the input
• "Input Signal Settings - Signal Menu" p.103
signal from your image source.
Changing the Image Aspect Ratio
Black bands and cropped images may project in certain aspect ratios,
depending on the aspect ratio and resolution of your input signal.
a
You can change the aspect ratio of the displayed image.
The Auto aspect ratio setting is available only for HDMI/MHL image
sources.
a
Turn on the projector and switch to the image source you want to use.
For projectors with a resolution of WUXGA (1920 × 1200) or WXGA
b
Press the [Aspect] button on the remote control.
(1280 × 800)
Aspect mode Description
Auto Automatically sets the aspect ratio according to the
input signal and the Resolution setting.
Normal Displays images using the full projection area and
maintains the aspect ratio of the image.
16:9 Converts the aspect ratio of the image to 16:9.
Full Displays images using the full size of the projection
area, but does not maintain the aspect ratio.
Zoom Displays images using the full width of the projection
c
To cycle through the available aspect ratios for your input signal, press
area and maintains the aspect ratio of the image.
the [Aspect] button repeatedly.
Native Displays images as is (aspect ratio and resolution are
maintained).
52
Image Aspect Ratio
For projectors with a resolution of XGA (1024 × 768) or SVGA (800 × 600)
Aspect mode Aspect ratio for input signals
16:10 16:9 4:3
Aspect mode Description
Native
Auto Automatically sets the aspect ratio according to the
input signal and the Resolution setting.
4:3 Converts the aspect ratio of the image to 4:3.
16:9 Converts the aspect ratio of the image to 16:9.
For projectors with a resolution of XGA (1024 × 768) or SVGA (800 × 600)
Aspect mode Aspect ratio for input signals
Projected Image Appearance with Each Aspect Mode
16:10 16:9 4:3
Black bands and cropped images may project in certain aspect ratios,
Auto
depending on the aspect ratio and resolution of your input signal. See the
following table to confirm the position of black bands and cropped images.
4:3
The image for Native varies depending on the input signal.
a
For projectors with a resolution of WUXGA (1920 × 1200) or WXGA
16:9
(1280 × 800)
Aspect mode Aspect ratio for input signals
16:10 16:9 4:3
Normal
Auto
16:9
Full
Zoom
53
Color Mode
press the [Color Mode] button repeatedly.
The projector offers different Color Modes to provide optimum brightness,
You can also set the Color Mode setting in the projector's Image
contrast, and color for a variety of viewing environments and image types.
menu.
a
You can select the mode designed to match your image and environment, or
experiment with the available modes.
gg Related Links
gg Related Links
• "Image Quality Settings - Image Menu" p.101
• "Changing the Color Mode" p.53
• "Available Color Modes" p.53
• "Setting Auto Iris" p.53
Available Color Modes
You can set the projector to use these Color Modes, depending on the input
Changing the Color Mode
source you are using:
You can change the projector's Color Mode using the remote control to
Color Mode Description
optimize the image for your viewing environment.
Presentation Best for color presentations and television images in a
bright room, with vivid images in sharp contrast.
a
Turn on the projector and switch to the image source you want to use.
Dynamic Best for projecting in a bright room. This is the
brightest mode.
b
Press the [Color Mode] button on the remote control to change the
Color Mode.
Cinema Best for movies projected in a dark room with natural
tone images.
sRGB Best for still images projected in a bright room that
conform to the sRGB color standard.
Blackboard Best for presentations onto a green chalkboard
(adjusts the colors accordingly).
Setting Auto Iris
In Dynamic or Cinema color modes, you can turn on Auto Iris to
automatically optimize the image based on the brightness of the content.
The name of the Color Mode appears briefly on the screen and then
image appearance changes.
a
Turn on the projector and switch to the image source you want to use.
c
To cycle through all of the available Color Modes for your input signal,
54
Color Mode
b
Press the [Menu] button on the control panel or remote control.
d
Select Auto Iris and press [Enter].
c
Select the Image menu and press [Enter].
e
Choose one of the following options and press [Enter]:
High Speed to adjust brightness as soon as the scene changes.
Normal for standard brightness adjustment.
f
Press [Menu] or [Esc] to exit the menus.
55
Controlling the Volume with the Volume Buttons
• "Projector Feature Settings - Settings Menu" p.105
The volume buttons control the projector's internal speaker system.
You must adjust the volume separately for each connected input source.
a
Turn on the projector and start a presentation.
b
To lower or raise the volume, press the [Volume] buttons on the
control panel or remote control as shown.
The [Volume] buttons on the control panel are available only
with EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EB-
a
W04/EB-X04/EB-U130/EB-W130/EB-X130/EB-X350/EB-X300.
A volume gauge appears on the screen.
c
To set the volume to a specific level for an input source, select Volume
in the projector's Settings menu.
Caution
Do not start a presentation at a high volume setting. Sudden loud noises may cause
hearing loss.
Always lower the volume before powering off, so that you can power on and then
gradually increase the volume.
gg Related Links
Adjusting Projector Features
Follow the instructions in these sections to use your projector's adjustment features.
gg Related Links
• "Projecting Two Images Simultaneously" p.57
• "Projecting a PC Free Presentation" p.60
• "Shutting Off the Image and Sound Temporarily" p.65
• "Stopping Video Action Temporarily" p.66
• "Zooming Images" p.67
• "Using the Remote Control as a Wireless Mouse" p.68
• "Using the Remote Control as a Pointer" p.70
• "Saving a User's Logo Image" p.71
• "Color Difference Correction when Projecting from Multiple Projectors" p.73
• "Projector Security Features" p.76
57
Projecting Two Images Simultaneously
You can use the split screen feature to simultaneously project two images
a
Press [Split] button on the remote control.
from different image sources. You can control the split screen feature using
the remote control or the projector menus.
The currently selected input source moves to the left of the screen.
You can perform the same operations from Split Screen in the
projector's Settings menu.
a
b
Press the [Menu] button.
You see this screen:
While using the split screen feature, other projector features may not
be available and some settings may be automatically applied to both
a
images.
58
Projecting Two Images Simultaneously
• USB Display, USB and LAN
c
To select an input source for the other image, select the Source setting,
e
To enlarge one image while reducing the other image, select Screen
press [Enter], select the input source, select Execute, and press [Enter]. Size, press [Enter], select a size, press [Enter], and press [Menu] to exit.
Depending on the video input signals, the images may not
appear at the same size even if you select Equal.
a
f
To select the audio, select Audio Source, press [Enter], select an audio
option, press [Enter], and press [Menu] to exit.
Select Auto to hear audio from the largest screen or the left
screen.
a
You can only select input sources that can be combined.
a
While using the split screen feature, the source screen appears
when you change the input source from the remote control.
g
To exit the split screen feature, press [Split] or [Esc].
gg Related Links
d
To switch images, select Swap Screens and press [Enter].
• "Unsupported Input Source Combinations for Split Screen Projection" p.58
The projected images on the left and right are swapped.
• "Split Screen Projection Restrictions" p.59
Unsupported Input Source Combinations for Split
Screen Projection
These input source combinations cannot be projected on a split screen.
• Computer, Video and S-Video
59
Projecting Two Images Simultaneously
• "Setting Auto Iris" p.53
Split Screen Projection Restrictions
Operating restrictions
The following operations cannot be performed during split screen projection.
• Setting the projector's menu
• E-Zoom
• Switching the aspect mode (the aspect mode is set to Normal)
• Operations using the [User] button on the remote control
• Auto Iris
Help can only be displayed when no image signals are being input or
when an error or warning notification is displayed.
a
Image restrictions
• If you make adjustments such as Brightness, Contrast, Color Saturation,
Tint, and Sharpness in the projector's Image menu, you can apply them
only to the image on the left. Default adjustments are applied to the image
on the right. Adjustments that affect the entire projected image such as
Color Mode and Color Temp. are applied for both left and right images.
• Even if you make adjustments for Noise Reduction and Deinterlacing in
the projector's Image menu, Noise Reduction is set to 0 and Deinterlacing
is set to Off for the image on the right.
• Even if you set Display Background to Logo in the projector's Extended
menu, the blue screen appears when no image signal is being input.
gg Related Links
• "Image Aspect Ratio" p.51
• "Color Mode" p.53
• "Input Signal Settings - Signal Menu" p.103
• "Projector Feature Settings - Settings Menu" p.105
• "Projector Setup Settings - Extended Menu" p.107
• "Zooming Images" p.67
60
Projecting a PC Free Presentation
reader at one time.
You can use your projector's PC Free feature whenever you connect a USB
File contents File type Details
device that contains compatible presentation files. This lets you quickly and
(extension)
easily display a presentation and control it using the projector's remote
Image .jpg Make sure the file is not:
control.
CMYK format
Progressive format
Highly compressed
Above 8192 × 8192 resolution
.bmp Make sure the file resolution is not above 1280 × 800
.gif Make sure the file is not:
Above 1280 × 800 resolution
Animated
.png Make sure the file resolution is not above 1280 × 800
Movie .avi Make sure the file is not:
(Motion
gg Related Links
Saved with an audio codec other than PCM or
JPEG)
ADPCM
• "Supported PC Free File Types" p.60
• "Precautions on PC Free Projection" p.60
Above 1280 × 720 resolution
• "Starting a PC Free Slide Show" p.61
Larger than 2 GB
• "Starting a PC Free Movie Presentation" p.62
• "PC Free Display Options" p.63
Precautions on PC Free Projection
Supported PC Free File Types
Note the following precautions when using PC Free features.
You can project these types of files using the projector's PC Free feature.
• Do not disconnect the USB storage device while it is being accessed;
otherwise, PC Free may not operate correctly.
For best results, place your files on media that is formatted in
• You may not be able to use the security features on certain USB storage
FAT16/32.
a
devices with PC Free features.
If you have trouble projecting from media formatted for non-
• When connecting a USB device that includes an AC adapter, connect the
Windows file systems, try formatting the media for Windows
AC adapter to an electrical outlet when you use the device with your
instead.
projector.
• Some commercially available USB card readers may not be compatible with
the projector.
• The projector can recognize up to 5 cards inserted into the connected card
61
Projecting a PC Free Presentation
file list screen.)
The PC Free file list screen is displayed.
• You cannot correct keystone distortion while projecting in PC Free, so
correct the image shape before you begin your presentation.
• You can use the following functions while projecting in PC Free.
• Freeze
• A/V Mute
• E-Zoom
• Pointer
gg Related Links
• "Stopping Video Action Temporarily" p.66
• "Shutting Off the Image and Sound Temporarily" p.65
• "Zooming Images" p.67
• "Using the Remote Control as a Pointer" p.70
Starting a PC Free Slide Show
After connecting a USB device to the projector, you can switch to the USB
If the Select Drive screen is displayed, press the arrow buttons
input source and start your slide show.
to select the drive and press [Enter].
a
To display the Select Drive screen, highlight Select Drive at the
top of the file list screen and press [Enter].
You can change the PC Free operation options or add special effects by
highlighting Option at the bottom of the screen and pressing [Enter].
a
b
Do one of the following to locate your files:
a
Press the [USB] button on the remote control.
If you need to display files inside a subfolder on your device, press
the arrow buttons to highlight the folder and press [Enter].
To move back up a folder level on your device, highlight Back to
Top and press [Enter].
To view additional files in a folder, highlight Next Page or Previous
Page and press [Enter], or press the [Page] up or down buttons on
the remote control.
c
Do one of the following:
To display an individual image, press the arrow buttons to highlight
the image and press [Enter]. (Press the [Esc] button to return to the
62
Projecting a PC Free Presentation
You return to the file list screen.
To display a slide show of all the images in a folder, press the arrow
f
Turn off the USB device, if necessary, and then disconnect the device
buttons to highlight the Slideshow option at the bottom of the screen from the projector.
and press [Enter].
gg Related Links
You can change the image switching time by highlighting
• "PC Free Display Options" p.63
Option at the bottom of the screen and pressing [Enter].
a
• "Connecting to a USB Device" p.27
If any file names are longer than the display area or include
unsupported symbols, the file names may be shortened or
changed only on the screen display.
Starting a PC Free Movie Presentation
After connecting a USB device to the projector, you can switch to the USB
d
While projecting, use the following commands to control the display:
input source and start your movie.
To rotate a displayed image, press the up or down arrow button.
You can change the PC Free operation options by highlighting Option
at the bottom of the screen and pressing [Enter].
a
a
Press the [USB] button on the remote control.
The PC Free file list screen is displayed.
To move to the next or previous image, press the left or right arrow
button.
e
To stop the display, follow the on-screen instructions or press the [Esc]
button.
63
Projecting a PC Free Presentation
• "Connecting to a USB Device" p.27
If the Select Drive screen is displayed, press the arrow buttons
PC Free Display Options
to select the drive and press [Enter].
a
To display the Select Drive screen, highlight Select Drive at the
You can select these display options when using PC Free. To access this
top of the file list screen and press [Enter].
screen, highlight Option at the bottom of the PC Free file list screen and press
[Enter].
b
Do one of the following to locate your files:
If you need to display files inside a subfolder on your device, press
the arrow buttons to highlight the folder and press [Enter].
To move back up a folder level on your device, highlight Back to
Top and press [Enter].
To view additional files in a folder, highlight Next Page or Previous
Page, and press [Enter], or press the [Page] up or down buttons on
the remote control.
c
To play back a movie, press the arrow buttons to highlight the file and
press [Enter].
If any file names are longer than the display area or include
unsupported symbols, the file names may be shortened or
a
Setting Options Description
changed only on the screen display.
If you want to play back all the movies in a folder in sequence,
Display Order Name Order Displays files in name order
select the Slideshow option at the bottom of the screen.
Date Order Displays files in date order
Sort Order In Ascending Sorts files in first-to-last order
d
To stop movie playback, press the [Esc] button, highlight Exit, and
In Descending Sorts files in last-to-first order
press [Enter].
Continuous Play On Displays a slide show continuously
You return to the file list screen.
Off Displays a slide show once
e
Turn off the USB device, if necessary, and then disconnect the device
Screen Switching No Does not display the next file
Time automatically
from the projector.
1 Second to 60 Seconds Displays files for the selected time
and switches to the next file
gg Related Links
automatically; high resolution images
• "PC Free Display Options" p.63
may switch at a slightly slower rate
64
Projecting a PC Free Presentation
Setting Options Description
Effect No No effect
Wipe Transitions between images using a
wipe effect
Dissolve Transitions between images using a
dissolve effect
Random Transitions between images using a
random variety of effects
65
Shutting Off the Image and Sound Temporarily
b
To turn the image and sound back on, press [A/V Mute] again.
You can temporarily turn off the projected image and sound if you want to
You can also stop projection using the A/V Mute slide lever on the
redirect your audience's attention during a presentation. Any sound or video
projector.
a
action continues to run, however, so you cannot resume projection at the
The projector's power automatically turns off 30 minutes after A/V
point that you stopped it.
Mute is enabled. You can disable this feature in the projector's ECO
menu.
s ECO > Lens Cover Timer
s ECO > A/V Mute Timer
The lamp is still operating during A/V Mute, so the lamp hours
continue to accumulate.
gg Related Links
• "Projector Setup Settings - Extended Menu" p.107
• "Projector Setup Settings - ECO Menu" p.115
If you want to display an image such as a company logo or picture
when the [A/V Mute] button is pressed, you can select the screen
a
displayed in the A/V Mute setting in the projector's Extended menu.
s Extended > Display > A/V Mute
a
Press the [A/V Mute] button on the remote control to temporarily stop
projection and mute any sound.
66
Stopping Video Action Temporarily
b
To restart the video action in progress, press [Freeze] again.
You can temporarily stop the action in a video or computer presentation and
keep the current image on the screen. Any sound or video action continues to
run, however, so you cannot resume projection at the point that you stopped
it.
a
Press the [Freeze] button on the remote control to stop the video
action.
67
Zooming Images
To return to the original image size, press [Esc].
You can draw attention to parts of a presentation by zooming into a portion The enlarged image is projected and the enlargement ratio is displayed
of the image and enlarging it on the screen. on the screen.
a
Press the [E-Zoom +] button on the remote control.
You see a crosshair on the screen indicating the center of the zoom
area.
b
Use the following buttons on the remote control to adjust the zoomed
image:
Use the arrow buttons to position the crosshair in the image area you
want to zoom into. To move the crosshair diagonally, press any pair
of adjacent arrow buttons at the same time.
Press the [E-Zoom +] button repeatedly to zoom into the image area.
Press and hold the [E-Zoom +] button to zoom in more quickly. The
selected area can be enlarged to between one to four times in 25
incremental steps.
To pan around the zoomed image area, use the arrow buttons.
To zoom out of the image, press the [E-Zoom –] button.
68
Using the Remote Control as a Wireless Mouse
You can use the projector's remote control as a wireless mouse so you can
d
Use the following buttons on the remote control to control your
control projection at a distance from the computer. presentation:
You can use the wireless mouse features with Windows 2000 and later,
or OS X 10.3.x and later.
a
a
Connect the projector to a computer using the projector's USB-B,
Computer, or HDMI port.
The wireless mouse function does not work when projecting
images from a device connected to the HDMI/MHL port using
a
an MHL cable.
b
If you connected your computer to the port other than the USB-B port,
also connect a USB cable to the projector's USB-B port and to a USB
port on your computer (for wireless mouse support).
To move through slides or pages, press the [Page] up or down
buttons.
c
Start your presentation.
To move the cursor on the screen, use the arrow buttons. To move
the cursor diagonally, press any pair of adjacent arrow buttons at the
same time.
To left-click, press the [Enter] button once (press it twice to double-
click). To right-click, press the [Esc] button.
To drag-and-drop, hold the [Enter] button as you move the cursor
with the arrow buttons, then release [Enter] at the destination.
If the mouse button settings are set to reverse on the computer, the
operation of the remote control buttons is also reversed.
a
The Wireless Mouse function does not work under the following
conditions:
When the projector's menu or a Help screen is displayed.
When operating functions other than the Wireless Mouse function
(such as adjusting the volume).
However, when using the E-Zoom or Pointer function, the page up
or down function is available.
69
Using the Remote Control as a Wireless Mouse
• "Using the Remote Control as a Pointer" p.70
gg Related Links
• "Zooming Images" p.67
70
Using the Remote Control as a Pointer
c
Press [Esc] to remove the pointer from the screen.
You can use the projector's remote control as a pointer to help you focus your
gg Related Links
audience on important information on the screen. The default pointer shape
• "Projector Feature Settings - Settings Menu" p.105
is an arrow. You can change the shape in the Pointer Shape setting in the
projector's Settings menu.
a
Press the [Pointer] button on the remote control.
b
Use the arrow buttons to move the pointer on the screen. To move the
pointer diagonally, press any pair of adjacent arrow buttons at the same
time.
71
Saving a User's Logo Image
You can save an image on the projector and display it whenever the projector
d
Select User's Logo and press [Enter].
turns on. You can also display the image when the projector is not receiving
an input signal or when you temporarily stop projection (using A/V Mute).
This image is called the user's logo screen.
You can select a photo, graphic, or company logo as the user's logo, which is
useful in identifying the projector's owner to help deter theft. You can prevent
changes to the user's logo by setting up password protection.
Once you save a user's logo, you cannot return to the factory default
logo.
a
If the User's Logo Protection setting is set to On in the Password
Protection menu, set to Off before saving the user's logo.
When you copy the menu settings from one projector to another
using the batch setup feature, user's logo is also copied. Do not
register the information that you do not want to share between
multiple projectors as a user's logo.
You see a prompt asking if you want to use the displayed image as a
a
Display the image you want to project as the user's logo.
user's logo.
b
Press the [Menu] button on the control panel or remote control.
Adjustments such as Keystone, E-Zoom, or Aspect are
temporarily cancelled when you select User's Logo.
a
c
Select the Extended menu and press [Enter].
e
Select Yes and press [Enter].
You see a selection box overlaying your image.
Depending on the current image signal, the screen size may
change to match the resolution of the image signal.
a
72
Saving a User's Logo Image
logo.
f
Use the arrow buttons to surround the image area you want to use as
i
Select Yes and press [Enter].
the user's logo and press [Enter].
The user's logo is overwritten and a completion message appears.
j
Press [Esc] to exit the message screen.
k
Select the Extended menu and press [Enter].
l
Select Display and press [Enter].
m
Select when you want to display the User's Logo screen:
To display it whenever there is no input signal, select Display
Background and set it to Logo.
You see a prompt asking if you want to select this image area.
To display it whenever you turn the projector on, select Startup
You cannot change the image area size (400 × 300 pixels).
Screen and set it to On.
a
To display it whenever you press the [A/V Mute] button, select A/V
Mute and set it to Logo.
g
Select Yes and press [Enter]. (If you want to change the selected area,
select No, press [Enter], and repeat the last step.)
To prevent anyone from changing the User's Logo settings without first
entering a password, set the User's Logo Protection setting to On in the
You see the User's Logo zoom factor menu.
Password Protection menu and set the password.
h
Select a zoom percentage and press [Enter].
gg Related Links
• "Shutting Off the Image and Sound Temporarily" p.65
• "Selecting Password Security Types" p.77
You see a prompt asking if you want to save the image as the user's
73
Color Difference Correction when Projecting from Multiple Projectors
c
Select Projector ID and press [Enter].
When lining up multiple projectors to project images, you can correct the
d
Use the arrow buttons to select the identification number you want to
brightness and color tone of each projector's image so that the images match use for the projector. Then press [Enter].
closely.
You can set a unique projector ID for each projector to operate them
individually using a remote control, and then correct the brightness and color
for each projector.
In some cases the brightness and color tone may not match
completely even after correction.
a
If brightness and color tone differences become more noticeable over
time, repeat the adjustments.
gg Related Links
• "Setting the Projector ID" p.73
• "Selecting the Projector You want to Operate" p.73
• "Matching Multiple-Projector Display Quality" p.75
e
Press [Menu] or [Esc] to exit the menus.
Setting the Projector ID
Repeat these steps for all the other projectors you want to operate from one
If you want to control multiple projectors from a remote control, give each
remote control.
projector a unique ID.
Selecting the Projector You want to Operate
a
Press the [Menu] button on the control panel or remote control.
After setting the projector's ID, select the ID for the projector you want to
b
Select the Extended menu and press [Enter].
operate using the remote control.
74
Color Difference Correction when Projecting from Multiple Projectors
a
Aim the remote control at the target projector and press the [ID]
b
While holding the [ID] button, press the number button that matches
button. the ID of the projector you want to operate.
The current Projector ID is displayed on the projected screen. It
disappears after about 3 seconds.
The projector you want to operate is selected.
c
Press the [ID] button to check if the ID-setting process worked.
You see a message displayed by the projector.
• If the remote control is listed as On, you can operate the projector
from the remote control.
• If the remote control is listed as Off, you cannot operate the projector
from the remote control. Repeat the steps above to enable the remote
control.
You must select the projector ID from the remote control each
time you turn on the projector you have set it to control. When
a
you turn on the projector, 0 is selected as the remote control's
projector ID.
When you set the Projector ID setting to Off, you can operate
the projector using the remote control whichever ID you select
on the remote control.
When you select 0 on the remote control, you can operate all
projectors regardless the Projector ID setting.
75
Color Difference Correction when Projecting from Multiple Projectors
Image menu adjustments as necessary to match the projectors' displays.
Matching Multiple-Projector Display Quality
You can match the display quality of multiple projectors that will project next
to each other.
a
Turn on all the projectors on which you want to match the display
quality.
b
Set ID numbers on each projector.
c
Make sure all the projectors are using the same Color Mode setting.
d
Select the remote control ID to match the first projector.
e
Press the [Menu] button, select the Image menu, and press [Enter].
f
Select settings as necessary.
g
Select the remote control ID to match the next projector, then repeat
76
Projector Security Features
• "Entering a Password to Use the Projector" p.78
You can secure your projector to deter theft or prevent unintended use by
Setting a Password
setting up the following security features:
To use password security, you must set a password.
• Password security to prevent people who do not know the password from
using the projector, and prevent changes to the startup screen and other
The default password is set to "0000". Change this to your own
settings. This acts as an anti-theft function as the projector cannot be used
password.
a
even if it is stolen, and you can limit who can use the projector.
• Button lock security to block operation of the projector using the buttons
on the control panel. This is useful at events or shows when you want to
a
Hold down the [Freeze] button on the remote control for about 5
deactivate all buttons during projection or at schools when you want to
seconds.
limit button operation.
• Security cabling to physically secure the projector in place.
gg Related Links
• "Password Security Types" p.76
• "Locking the Projector's Buttons" p.78
• "Installing a Security Cable" p.80
Password Security Types
You see the Password Protection setting menu.
You can set up the following types of password security using one shared
password:
If Password Protection is already activated, you must enter the
correct password to display the Password Protection setting
a
Power On Protection password prevents anyone from using the projector
menu.
without first entering a password. When plugging the power cord and
turning on the projector at first time, you must enter the correct password.
This also applies to Direct Power On and Auto Power On.
b
Select Password and press [Enter].
User's Logo Protection password prevents anyone from changing the
custom screen displayed when the projector turns on, when no signal is
being input, or when you use the A/V Mute feature. The custom screen
discourages theft by identifying the projector's owner.
Network Protection password prevents anyone from changing the
projector's Network settings.
gg Related Links
• "Setting a Password" p.76
• "Selecting Password Security Types" p.77
77
Projector Security Features
g
Make a note of the password and keep it in a safe place.
You see the prompt "Change the password?".
Selecting Password Security Types
After setting a password, you see this menu, allowing you to select the
c
Select Yes and press [Enter].
password security types you want to use.
If you select No, the Password Protection setting menu is
displayed again.
a
d
Hold down the [Num] button on the remote control and use the
numeric buttons to set a four-digit password.
If you do not see this menu, hold down the [Freeze] button on the remote
control for 5 seconds until the menu appears.
• To prevent unauthorized use of the projector, select On as the Power On
Protection setting.
• To prevent changes to the User's Logo screen or related display settings,
select On as the User's Logo Protection setting.
• To prevent changes to network settings, select On as the Network
The password displays as **** as it is entered. A confirmation prompt is
Protection setting.
displayed when you enter the fourth digit.
You can attach the password protect sticker to the projector as an additional
theft deterrent.
e
Enter the password again.
You see the message "Password accepted". If you enter the password
Be sure to keep the remote control in a safe place; if you lose it, you will
incorrectly, a message is displayed prompting you to re-enter the
not be able to enter the password.
a
password.
f
Press [Esc] to return to the menu.
78
Projector Security Features
again. Enter the correct password to proceed.
Entering a Password to Use the Projector
Attention
If an incorrect password is entered three times in succession, the message
When the password screen is displayed, enter the correct password.
"The projector's operation will be locked." is displayed for approximately
5 minutes, and the projector switches to standby mode. If this happens,
disconnect the power plug from the electrical outlet, reinsert it, and turn
the projector back on. The projector displays the password entry screen
again so that you can enter the correct password.
If you have forgotten the password, make a note of the "Request Code:
xxxxx" number that appears on the screen and contact Epson for help.
If you continue to repeat the above operation and input the wrong
password 30 times in succession, the message "The projector's operation
will be locked. Contact Epson as described in your documentation." is
displayed and the projector does not accept any more password entries.
Contact Epson for help.
a
Hold down the [Num] button on the remote control while you enter
Locking the Projector's Buttons
the password using the numeric buttons.
You can lock the buttons on the control panel to prevent anyone from using
the projector. You can lock all the buttons or all the buttons except the power
button. The projector can still be operated using the remote control.
a
Press the [Menu] button on the control panel or remote control.
The password screen closes.
b
If the password is incorrect, you see a message and a prompt to try
79
Projector Security Features
A message is displayed and the lock is released.
b
Select Settings and press [Enter].
d
Select Control Panel Lock and press [Enter].
e
Select one of these lock types and press [Enter]:
c
Select Lock Setting and press [Enter].
To lock all of the projector's buttons, select Full Lock.
To lock all buttons except the power button, select Partial Lock.
You see a confirmation prompt.
f
Select Yes and press [Enter].
The control panel buttons are locked using the setting you chose.
gg Related Links
• "Unlocking the Projector's Buttons" p.79
Unlocking the Projector's Buttons
If the projector's buttons have been locked, do one of the following to unlock
them.
• Hold down the [Enter] button on the control panel for 7 seconds.
80
Projector Security Features
• Select Off as the Control Panel Lock setting in the projector's Settings
menu.
s Settings > Lock Setting > Control Panel Lock
gg Related Links
• "Projector Feature Settings - Settings Menu" p.105
Installing a Security Cable
You can install two types of security cables on the projector to deter theft.
• Use the security slot on the projector to attach a Kensington Microsaver
Security system.
For more details on the Microsaver Security System, see
http://www.kensington.com/.
a
• Use the security cable attachment point on the projector to attach a wire
cable and secure it to a room fixture or heavy furniture.
You can use a commercially available theft-prevention wire lock. See
the documentation supplied with the wire lock for locking
a
instructions.
Using the Projector on a Network
Follow the instructions in these sections to set up your projector for use on a network.
gg Related Links
• "Wireless Network Projection" p.82
• "Using a QR Code to Connect a Mobile Device" p.87
• "Using Quick Wireless Connection (Windows Only)" p.89
82
Wireless Network Projection
You can send images to your projector through a wireless network.
Attention
Never remove the module while its indicator is blue or flashing, or while you are
• To do this, you must install the Epson 802.11b/g/n wireless LAN module,
projecting wirelessly. This could damage the module or lose data.
and then set up your projector and computer for wireless projection (EB-
W31/EB-X36/EB-X31/EB-S31/EB-U04/EB-W04/EB-X04/EB-S04/EB-
U130/EB-W130/EB-X130/EB-S130/EB-X350/EB-X300/EB-S300).
a
Use a cross-head screwdriver to remove the screw that secures the
• Some models have built-in wireless LAN modules (EB-U32/EB-W32). You
wireless LAN module cover.
don't need to install the Epson 802.11b/g/n wireless LAN module.
There are two ways to connect the projector to your wireless network:
• Using the optional Quick Wireless Connection USB Key (Windows only)
• Configuring the connection manually using the projector's Network menus
After installing the wireless LAN module and setting up the projector, install
the network software from the Epson Projector Software CD-ROM (if
available) or download the software, as necessary. Use the following software
and documentation to set up and control wireless projection:
• EasyMP Network Projection software sets up your computer for wireless
network projection. See the EasyMP Network Projection Operation Guide for
instructions.
• EasyMP Multi PC Projection software allows you to hold interactive
meetings by projecting the computer screens of users over a network. See
the EasyMP Multi PC Projection Operation Guide for instructions.
b
Connect the wireless LAN module to the USB-A port.
gg Related Links
• "Installing the Wireless LAN Module" p.82
• "Selecting Wireless Network Settings Manually" p.83
• "Selecting Wireless Network Settings in Windows" p.85
• "Selecting Wireless Network Settings in OS X" p.85
• "Setting Up Wireless Network Security" p.85
Installing the Wireless LAN Module
To use the projector over a wireless network, install the Epson 802.11b/g/n
wireless LAN module (EB-W31/EB-X36/EB-X31/EB-S31/EB-U04/EB-
W04/EB-X04/EB-S04/EB-U130/EB-W130/EB-X130/EB-S130/EB-X350/EB-
X300/EB-S300). Do not install any other type of wireless LAN module.
83
Wireless Network Projection
d
Select Network Configuration and press [Enter].
c
Attach the wireless LAN module cover, and secure it in place with the
b
Select the Network menu and press [Enter].
screw.
c
Select Wireless LAN On as the Wireless Mode setting.
Selecting Wireless Network Settings Manually
Before you can project from your wireless network, you need to select
network settings for the projector.
a
Press the [Menu] button on the control panel or remote control.
84
Wireless Network Projection
Subnet Mask, and Gateway Address as necessary.
e
Select the Basic menu and press [Enter].
g
Select the Wireless LAN menu and press [Enter].
h
Select the Connection Mode setting.
f
Select the basic options as necessary.
Quick lets you quickly connect to one computer.
Projector Name lets you enter a name up to 16 alphanumeric
characters long to identify the projector over the network.
Advanced lets you connect to computers over a wireless network
access point.
Web Control Password lets you enter a password up to 8
alphanumeric characters long for accessing the projector over the
Web. (Default user name is EPSONWEB; default password is
i
If you selected the Advanced connection mode, select Search Access
admin.) Point to select the access point you want to connect to.
Projector Keyword lets you turn on a security password to prevent
If you need to assign the SSID manually, select SSID to enter the
access to the projector by anyone not in the room with it. You must
SSID.
a
enter a displayed, randomized keyword from a computer using the
EasyMP Network Projection software to access the projector.
j
For the Advanced connection mode, assign the IP settings for your
Use the displayed keyboard to enter the name, passwords and
network as necessary.
keyword. Press the arrow buttons on the remote control to
a
highlight characters and press [Enter] to select them.
If your network assigns addresses automatically, select IP Settings to
set the DHCP setting to On.
If you must set addresses manually, select IP Settings to set the
DHCP setting to Off, and then enter the projector's IP Address,
EB

85
Wireless Network Projection
b
Select the Network menu and press [Enter].
k
To prevent the SSID or IP address from being displayed on the standby
a
To access your wireless utility software, double-click the network icon
screen, set the SSID Display setting or the IP Address Display setting on the Windows taskbar.
to Off.
b
When connecting in Advanced connection mode, select the network
l
When you have finished selecting settings, select Complete and then name (SSID) of the network the projector is connecting to.
follow the on-screen instructions to save your settings and exit the
menus.
c
Click Connect.
m
Press the [LAN] button on the remote control.
Selecting Wireless Network Settings in OS X
The wireless network settings are complete when you see the correct IP
address on the LAN standby screen.
Before connecting to the projector, select the correct wireless network in OS
X.
a
Click the AirPort icon on the menu bar at the top of the screen.
b
When connecting in Advanced connection mode, make sure AirPort is
turned on and select the network name (SSID) of the network the
projector is connecting to.
Setting Up Wireless Network Security
You can set up security for your projector to use on a wireless network. Set up
When you have finished making wireless settings for your projector, you need
one of the following security options to match the settings used on your
to select the wireless network on your computer. Then start the network
network:
software to send images to your projector through a wireless network.
• WPA2-PSK security
If you use the EasyMP Network Projection software, make sure you
• WPA/WPA2-PSK security
select the connection mode that matches the projector's connection
a
mode you selected.
Contact your network administrator for guidance on entering the
correct information.
a
Selecting Wireless Network Settings in Windows
a
Press the [Menu] button on the control panel or remote control.
Before connecting to the projector, select the correct wireless network on your
computer.
86
Wireless Network Projection
• "Network Menu - Security Menu" p.111
c
Select Network Configuration and press [Enter].
d
Select the Security menu and press [Enter].
e
Select the security settings to match your network settings.
f
When you have finished making settings, select Complete and follow
the on-screen instructions to save your settings and exit the menus.
gg Related Links
87
Using a QR Code to Connect a Mobile Device
the projector.
After selecting the wireless network settings for your projector, you can
d
Select the Basic menu and press [Enter].
display a QR code on the screen and use it to connect a mobile device using
the Epson iProjection app.
Make sure you have installed the latest version of Epson iProjection
(V1.3.0 or later) on your device.
a
You can download Epson iProjection for free from the App Store or
from Google play. Any fees incurred when communicating with the
App Store or Google play are the responsibility of the customer.
You need to setup a Wi-Fi profile when using Epson iProjection for
iOS for the first time.
a
Press the [Menu] button on the control panel or remote control.
b
Select the Network menu and press [Enter].
e
Set the Display LAN Info. setting to Text & QR Code.
f
Select Complete and then follow the on-screen instructions to save
your settings and exit the menus.
g
Press the [LAN] button on the remote control or select Display the QR
Code in the projector's Network menu.
The QR code is displayed on the projected surface.
If you do not see the QR code after pressing the [LAN] button,
press [Enter] to display the code.
a
h
Start Epson iProjection on your mobile device.
c
Select Network Configuration and press [Enter].
i
Read the projected QR code with your mobile device to connect it to
88
Using a QR Code to Connect a Mobile Device
you want to project.
To correctly read the QR code, make sure you face the screen
squarely and closely enough so that the projected code fits into
a
the guide of the mobile device's QR code reader. If you are too
far from the screen, the code may not be read.
When a connection is established, the image from the mobile device is
displayed. Tap Files on the application screen, and then select the file
89
Using Quick Wireless Connection (Windows Only)
your computer.
You can use the Quick Wireless Connection USB Key to quickly connect the
In Windows Vista, if the AutoPlay window is displayed, select
projector to a Windows computer wirelessly and project your presentation.
Run LaunchQWRD.exe, then select Allow.
a
The Quick Wireless Connection USB Key is not included with your
projector.
a
g
Follow the on-screen instructions to install the Quick Wireless
Connection driver.
a
Make sure the wireless LAN module is installed or built into your
If the Windows Firewall message is displayed, click Yes to disable
projector.
the firewall.
a
b
Turn on the projector.
After a few minutes, your computer image is displayed by the projector.
If it does not appear, press the [LAN] button on your projector's
c
Press the [LAN] button on the remote control.
remote control or restart your computer.
The LAN standby screen is displayed. Verify that an SSID and IP
h
Run your presentation.
address are displayed.
i
When you have finished projecting wirelessly, select the Safely Remove
d
Do one of the following to connect the Quick Wireless Connection
Hardware option in the Windows taskbar, and then remove the Quick
USB Key.
Wireless Connection USB Key from your computer.
Remove the wireless LAN module from the projector and insert the
Quick Wireless Connection USB Key into the same port used for the
You may need to restart your computer to reactivate your
wireless LAN module (EB-W31/EB-X36/EB-X31/EB-S31/EB-
wireless LAN connection.
a
U04/EB-W04/EB-X04/EB-S04/EB-U130/EB-W130/EB-X130/EB-
S130/EB-X350/EB-X300/EB-S300).
Connect the Quick Wireless Connection USB Key to the projector's
USB-A port (EB-U32/EB-W32).
You see a projected message that the network information update is
complete.
e
Remove the Quick Wireless Connection USB Key.
If your projector needs the wireless LAN module, reinsert the wireless
LAN module into the projector.
f
Connect the Quick Wireless Connection USB Key to a USB port on
Monitoring and Controlling the Projector
Follow the instructions in these sections to monitor and control the projector over a network.
gg Related Links
• "EasyMP Monitor" p.91
• "Controlling a Networked Projector Using a Web Browser" p.92
• "Setting Up Projector Network E-Mail Alerts" p.94
• "Setting Up Monitoring Using SNMP" p.95
• "Using ESC/VP21 Commands" p.96
91
EasyMP Monitor
http://www.epson.com/
EasyMP Monitor software (Windows only) lets you monitor and control your
projector through the network. See the EasyMP Monitor Operation Guide for
instructions.
You can download EasyMP Monitor from the following Web site.
92
Controlling a Networked Projector Using a Web Browser
follow the on-screen instructions to select settings.
Once you have connected your projector to your network, you can select
You cannot select the following settings using a Web browser.
projector settings and control projection using a compatible Web browser.
Test Pattern, Pointer Shape, User Button, User's Logo,
a
This lets you access the projector remotely.
Language, Reset Lamp Hours and all the settings in the
Network menu
Make sure the computer and projector are connected to the network.
You can select the following settings only using a Web
When projecting images via a wireless LAN, connect in Advanced
browser.
a
connection mode.
SNMP Community Name (up to 32 alphanumeric
The Web setup and control features support Internet Explorer 8.0 or
characters)
later, and Safari on networks that do not use a proxy server for
Monitor Password (up to 16 alphanumeric characters)
connection. Use Safari for OS X. You cannot select all of the
HTTP port (port number used for Web Control except for
projector menu settings or control all projector functions using a
80 [default], 843, 3620, 3621, 3625, 3629, 4352, 4649, 5357,
Web browser.
10000, 10001, 41794)
If you set Standby Mode to Communication On in the projector's
ECO menu, you can use a Web browser to select settings and control
projection even if the projector is in standby mode (when the power
e
To control projection remotely, select the Web Remote option.
is off).
a
Make sure the projector is turned on.
b
Start your Web browser on a computer connected to the network.
c
Type the projector's IP address into the browser's address box and press
the computer's Enter key.
You see the Web Control screen.
You may need to log in before you see the Web Control screen.
If you see a log in window, enter your user name and
a
password. (The default user name is EPSONWEB and the
default password is admin.)
You can change the password in the Web Control Password
menu in the projector's Network menu.
s Network > Basic > Web Control Password
d
To select projector menu settings, select the name of the menu and
93
Controlling a Networked Projector Using a Web Browser
f
Select the icon corresponding to the projector function you want to
S-Video is available with the EB-W32/EB-W31/EB-X36/EB-
control.
a
X31/EB-S31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EB-
S130/EB-X350/EB-X300/EB-S300.
gg Related Links
• "Network Menu - Basic Menu" p.109
• "Projector Setup Settings - ECO Menu" p.115
A
Power button control
B
Selects Computer port source
C
Selects S-Video, Video or HDMI/MHL port source
D
Freeze button control
E
A/V Mute button control
F
Page Up and Page Down button controls
G
Searches for sources
H
Selects the network source
I
Selects the USB Display or USB device source
J
Volume button controls
K
Displays the QR code
94
Setting Up Projector Network E-Mail Alerts
You can set up the projector to send you an e-mail alert over the network if
g
Select a number for the SMTP server Port Number, from 1 to 65535
there is a problem with the projector. (default is 25).
If you set the Standby Mode setting to Communication On in the projector's
h
Choose an address field, enter the e-mail address, and select the alerts
ECO menu, you can receive the e-mail alerts even if the projector is in
you want to receive. Repeat for up to three addresses.
standby mode (when the power is off).
Your e-mail address can be up to 32 alphanumeric characters
a
Press the [Menu] button on the control panel or remote control.
long.
a
b
Select the Network menu and press [Enter].
i
When you finish selecting settings, select Complete and follow the on-
c
Select Network Configuration and press [Enter].
screen instructions to save your settings and exit the menus.
d
Select the Mail menu and press [Enter].
If a critical problem causes a projector to shut down, you may not
receive an e-mail alert.
a
gg Related Links
• "Network Projector E-mail Alert Messages" p.94
• "Projector Setup Settings - ECO Menu" p.115
Network Projector E-mail Alert Messages
When a problem occurs with a projector on the network, and you selected to
receive e-mail alerts, you receive an e-mail containing the following
information:
• Address for Address 1 as the mail sender
Epson Projector in the subject line
e
Set the Mail Notification setting to On.
• The name of the projector experiencing a problem
• The IP address of the affected projector
f
Enter the IP address for the SMTP Server option.
• Detailed information about the problem
Do not use these addresses: 127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255).
a
95
Setting Up Monitoring Using SNMP
Network administrators can install SNMP (Simple Network Management
g
When you have finished selecting settings, select Complete and follow
Protocol) software on network computers so they can monitor projectors. If the on-screen instructions to save your settings and exit the menus.
your network uses this software, you can set up the projector for SNMP
monitoring.
a
Press the [Menu] button on the control panel or remote control.
b
Select the Network menu and press [Enter].
c
Select Network Configuration and press [Enter].
d
Select the Others menu and press [Enter].
e
Set the SNMP setting to On.
f
Enter up to two IP addresses to receive SNMP notifications, using 0 to
255 for each address field.
Do not use these addresses: 127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255).
a
96
Using ESC/VP21 Commands
• Default baud rate setting: 9600 bps
You can monitor and control the projector from a computer via USB. If the command being processed terminates abnormally, an error message is
Connect the computer and the projector with a USB cable, and enter the output and a ":" is returned.
communication commands (ESC/VP21 commands).
The following commands are available.
gg Related Links
Item Command
• "Setting Up for Using ESC/VP21 Commands" p.96
• "ESC/VP21 Command List" p.96
Power On/Off On PWR ON
• "Communications Protocol" p.96
Off PWR OFF
Signal selection Computer Auto SOURCE 1F
Setting Up for Using ESC/VP21 Commands
RGB SOURCE 11
Component SOURCE 14
The first time you control and monitor the projector using ESC/VP21
commands, you must install the USB communication driver on your
HDMI, HDMI1 SOURCE 30
computer and set up the projector. You do not need to install the driver the
HDMI2 * SOURCE A0
next time.
Video SOURCE 41
a
Install the USB communication driver (EPSON USB-COM Driver) on
S-Video ** SOURCE 42
your computer. For information about the EPSON USB-COM Driver,
USB Display SOURCE 51
contact Epson.
USB SOURCE 52
b
Set the USB Type B setting to Link 21L in the projector's Extended
LAN SOURCE 53
menu.
A/V Mute On/Off On MUTE ON
Off MUTE OFF
c
Connect your computer to the projector's USB-B port using a USB
cable.
* HDMI2 is available only with the EB-U32/EB-U04/EB-U130.
You can start from step 2 the next time you use the commands.
** S-Video is available only with the EB-W32/EB-W31/EB-X36/EB-X31/EB-
S31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EB-S130/EB-X350/EB-
X300/EB-S300.
ESC/VP21 Command List
Add a Carriage Return (CR) code (0Dh) to the end of each command and
When the power ON command is transmitted to the projector, the power
transmit.
turns on and it enters warm-up mode. When the projector's power has turned
Contact Epson for more details.
on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and returns a
Communications Protocol
":", and then accepts the next command.
97
Using ESC/VP21 Commands
• Flow control: None
• Data length: 8 bit
• Parity: None
• Stop-bit: 1 bit
Adjusting the Menu Settings
Follow the instructions in these sections to access the projector menu system and change projector settings.
gg Related Links
• "Using the Projector's Menus" p.99
• "Using the On-screen Keyboard" p.100
• "Image Quality Settings - Image Menu" p.101
• "Input Signal Settings - Signal Menu" p.103
• "Projector Feature Settings - Settings Menu" p.105
• "Projector Setup Settings - Extended Menu" p.107
• "Projector Network Settings - Network Menu" p.109
• "Projector Setup Settings - ECO Menu" p.115
• "Projector Information Display - Info Menu" p.116
• "Projector Reset Options - Reset Menu" p.118
• "Copy Menu Settings to Another Projector (Batch Setup)" p.119
99
Using the Projector's Menus
You can use the projector's menus to adjust the settings that control how your
c
To change settings in the displayed menu, press [Enter].
projector works. The projector displays the menus on the screen.
d
Press the up or down arrow button to move through the settings.
a
Press the [Menu] button on the control panel or remote control.
e
Change the settings using the buttons listed on the bottom of the menu
screens.
f
To return all the menu settings to their default values, select Reset.
g
When you finish changing settings on a menu, press [Esc].
h
Press [Menu] or [Esc] to exit the menus.
You see the menu screen displaying the Image menu settings.
b
Press the up or down arrow buttons to move through the menus listed
on the left. The settings for each menu are displayed on the right.
The available settings depend on the current input source.
a
100
Using the On-screen Keyboard
The on-screen keyboard is displayed when you need to enter numbers and
Text type Details
characters.
Alphabet ABCDEFGHIJKLMNOPQRSTUVWXY
Z
a
Use the arrow buttons on the control panel or remote control to
abcdefghijklmnopqrstuvwxyz
highlight the number or character you want to enter and press the
Symbols ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ]
[Enter] button.
^ _ ` { | } ~
Each time you select the CAPS key, the characters change
between upper case and lower case. Each time you select the
a
SYM1/2 key, the symbols enclosed by the frame change.
b
After entering the text, select Finish on the keyboard to confirm your
entries. Select Cancel to cancel entering text.
gg Related Links
• "Available Text Using the On-screen Keyboard" p.100
• "Controlling a Networked Projector Using a Web Browser" p.92
Available Text Using the On-screen Keyboard
You can enter the following text when using the on-screen keyboard.
Text type Details
Numbers 0123456789
101
Image Quality Settings - Image Menu
Settings on the Image menu let you adjust the quality of your image for the
Setting Options Description
input source you are currently using. The available settings depend on the
Color Temp. Color Temp. Sets the color tone based on color
currently selected input source.
temperature. The image is tinted blue
Customized
when a high value is selected and tinted
red when a low value is selected.
Color Temp.: select to set the color
temperature range from 3200K to
10000K (for sRGB mode) or from 0 to 10
(for other color modes).
Customized: adjusts the individual R
(red), G (green), and B (blue)
components of the offset and gain.
Image Noise Reduction Reduces flickering in analog images.
Enhancement
Advanced Deinterlacing Sets whether or not to convert
interlaced-to-progressive signals for
(For interlaced
certain video image types.
signal
[480i/576i/1080i] Off: for fast-moving video images.
input)
Video: for most video images.
To change settings for an input source, make sure the source is connected and
Film/Auto: for movies, computer
select that source.
graphics, and animation.
Auto Iris Off Adjusts the projected luminance based
Setting Options Description
on the image brightness when the Color
Normal
Mode is set to Dynamic or Cinema.
Color Mode See the list of Adjusts the vividness of image colors for
High Speed
available Color various image types and environments.
Reset Resets all adjustment values except Color
Modes
Mode on the Image menu to their
Brightness Varying levels Lightens or darkens the overall image.
default settings.
available
Contrast Varying levels Adjusts the difference between light and
available dark areas of the image.
The Brightness setting does not affect lamp brightness. To change
the lamp brightness mode, use the Power Consumption setting in
a
Color Saturation Varying levels Adjusts the intensity of the image colors.
the projector's ECO menu.
available
You cannot select the Noise Reduction setting when the following
Tint Varying levels Adjusts the balance of green to magenta
are being input.
available tones in the image.
The Deinterlacing setting is set to Off.
Sharpness Varying levels Adjusts the sharpness or softness of
A digital RGB signal is being input.
available image details.
An interlaced signal (480i/576i/1080i) is being input.
102
Image Quality Settings - Image Menu
• "Available Color Modes" p.53
gg Related Links
103
Input Signal Settings - Signal Menu
Normally the projector automatically detects and optimizes the input signal
Setting Options Description
settings. If you need to customize the settings, you can use the Signal menu.
Aspect See the list of Sets the aspect ratio (width-to-height
The available settings depend on the currently selected input source.
available aspect ratio) for the selected input source.
ratios.
You cannot select settings on the Signal menu when the current input
Tracking Varying levels Adjusts the signal to eliminate vertical
source is one of the following:
a
available stripes in computer images.
USB Display
Sync. Varying levels Adjusts the signal to eliminate fuzziness
USB
available or flickering in computer images.
LAN
Position Up Adjusts the image location on the screen.
Down
Left
Right
Auto Setup On Automatically optimizes computer image
quality (when On).
Off
Overscan Auto Changes the projected image ratio to
make the edges visible by a selectable
(For component Off
percentage or automatically.
video and RGB
4%
video signal input)
8%
You can restore the default settings of the Tracking, Sync., and
Position settings by pressing the [Auto] button on the remote control.
a
To change settings for an input source, make sure the source is connected and
select that source.
Setting Options Description
Resolution Auto Sets the input signal resolution if not
detected automatically using the Auto
Normal
option.
Wide
104
Input Signal Settings - Signal Menu
• "Available Image Aspect Ratios" p.51
Setting Options Description
Advanced HDMI Video HDMI Video Range:
Range
Sets the video range to match the setting
Input Signal of the device connected to the HDMI
input port.
Video Signal
Auto: detects the video range
automatically.
Normal: normally for images from a
device other than a computer; can also
be selected if the black areas of the
image are too bright.
Expanded: normally for images from a
computer; can also be selected if the
image is too dark.
Input Signal:
Specifies the signal type from the input
sources connected to the computer ports.
Auto: detects signals automatically.
RGB: corrects color for computer/RGB
video inputs.
Component: corrects color for
component video inputs.
Video Signal:
Specifies the signal type from the input
sources connected to the video ports.
Auto: detects signals automatically. If
interference appears or no image appears
when set to Auto, select the appropriate
signal according to the connected
equipment.
Reset Resets all adjustment values on the
Signal menu to their default settings,
except for the following:
Input Signal
gg Related Links
105
Projector Feature Settings - Settings Menu
Options on the Settings menu let you customize various projector features.
Setting Options Description
Volume Varying levels Adjusts the volume of projector’s speaker
available system.
Setting values are saved for each source.
Lock Setting Control Panel Lock Controls projector button locking to
secure the projector:
Full Lock: locks all buttons.
Partial Lock: locks all buttons except the
power button.
Off: no buttons locked.
Pointer Shape Changes the shape of the remote control
pointer.
Pointer 1:
Pointer 2:
Pointer 3:
Remote Receiver Front/Rear Limits reception of remote control
Setting Options Description
signals by the selected receiver; Off turns
Front
Keystone H/V-Keystone Adjusts image shape to rectangular
off all receivers.
Rear
(horizontally and vertically).
Quick Corner
Off
H/V-Keystone: select to manually
correct horizontal and vertical sides, or
User Button Power Assigns a menu option to the [User]
turn Auto V-Keystone and H-Keystone
Consumption button on the remote control for one-
Adjuster on or off.
touch access.
Info
Quick Corner: select to correct image
Deinterlacing
shape and alignment using an on-screen
Test Pattern
display.
Resolution
Split Screen Screen Size Divides the viewing area horizontally and
Display the QR
displays two images side-by-side (press
Source
Code
[Esc] to cancel split screen display).
Swap Screens
Audio Source
Display the QR
Code
Zoom Adjusts the size of the projected image.
(EB-S31/EB-
S04/EB-S130/EB-
S300)
106
Projector Feature Settings - Settings Menu
Setting Options Description
Test Pattern Displays a test pattern to assist in
focusing and zooming the image and
correcting image shape (press the [Esc]
button to cancel pattern display).
Attention
If a pattern is displayed for a
long time, a residual image may
be visible in projected images.
Reset Resets all adjustment values on the
Settings menu to their default settings,
except for the following:
Zoom
User Button
107
Projector Setup Settings - Extended Menu
Settings on the Extended menu let you customize various projector setup
Setting Options Description
features.
Display Messages Selects various display options:
Display Messages: set to On to display messages
Background such as input source name, color mode
name, aspect ratio, no signal message, or
Startup Screen
high temperature warning on your
A/V Mute
projected image.
Display Background: sets the screen
color or logo to display when no signal is
received.
Startup Screen: set to On to display the
user's logo when projection starts.
A/V Mute: sets the screen color or logo
to display when A/V Mute is turned on.
User's Logo Creates a screen that the projector
displays to identify itself and enhance
security.
Projection Front Selects the way the projector faces the
screen so the image is oriented correctly.
Front/Ceiling
Setting Options Description
Rear
Home Screen Home Screen Auto Selects the projector's Home screen
Rear/Ceiling
Disp. display options:
Custom Function 1 Home Screen Auto Disp.: select whether
or not to display the Home screen
Custom Function 2
automatically.
Custom Function 1/Custom Function
2: select to set functions and the display
as the customized Home screen.
108
Projector Setup Settings - Extended Menu
Setting Options Description
When you set User's Logo Protection to On in the Password
Protection screen, you cannot change settings related to user's logo
a
Operation Direct Power On Selects various operation options:
display (Display Background, Startup Screen, A/V Mute in the
High Altitude Direct Power On: lets you turn on the
Display setting). Set User's Logo Protection to Off first.
Mode projector by plugging it in without
pressing the power button.
Auto Source Search
gg Related Links
High Altitude Mode: regulates the
Auto Power On
projector’s operating temperature at
• "Selecting Password Security Types" p.77
altitudes above 1500 m.
Auto Source Search: set to On to detect
the input signal automatically and
project images when there is no input
signal.
Auto Power On: select the image source
from which you want to automatically
start projection. When the projector
detects the input signal from the selected
image source, it projects automatically in
standby mode. To enable this feature,
connect the projector using a VGA
computer cable or USB cable.
USB Type B USB Display USB Display: enables the USB Display.
Link 21L Link 21L: enables ESC/VP21 commands.
Projector ID Off Assigns an ID for the projector when you
use multiple projectors.
1 through 9
Language Various languages Select the language for projector menu
available and message displays.
Reset Resets all adjustment values on the
Extended menu to their default settings,
except for the following:
User's Logo
Projection
High Altitude Mode
Auto Source Search
USB Type B
Projector ID
Language
109
Projector Network Settings - Network Menu
Settings on the Basic menu let you select the basic network settings.
Settings on the Network menu let you view network information and set up
Setting Options Description
the projector for monitoring and controlling over a network.
Net. Info. - Connection Mode Displays wireless network status and
Wireless LAN details when you have selected Wireless
When you set Network Protection to On in the Password Protection screen,
Wireless LAN Sys.
Mode to Wireless LAN On.
you cannot change the network settings. Set Network Protection to Off first.
Antenna Level
Projector Name
SSID
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Region Code
Display the QR Displays the QR code.
Code
Network To additional Configures your network settings.
Configuration network menus
Once you have connected your projector to your network, you can
Setting Options Description
select projector settings and control projection using a compatible Web
a
browser. This lets you access the projector remotely.
Wireless Mode Wireless LAN On Configures your wireless LAN settings.
Off Select Wireless LAN On when
connecting the projector and a computer
gg Related Links
over a wireless LAN. If you do not want
• "Network Menu - Basic Menu" p.109
to connect via wireless LAN, turn it off to
• "Network Menu - Wireless LAN Menu" p.110
prevent unauthorized access by others.
• "Network Menu - Security Menu" p.111
• "Network Menu - Mail Menu" p.112
• "Network Menu - Others Menu" p.113
• "Network Menu - Reset Menu" p.113
• "Selecting Password Security Types" p.77
Network Menu - Basic Menu
110
Projector Network Settings - Network Menu
s Network > Network Configuration > Basic
Setting Options Description
Display LAN Info. Text & QR Code Set the display format for the projector's
network information.
Text
When a QR code is displayed, you can
connect to the network by simply
reading the QR code with Epson
iProjection. The default value is Text &
QR Code.
Network Menu - Wireless LAN Menu
Settings on the Wireless LAN menu let you select the wireless LAN settings.
s Network > Network Configuration > Wireless LAN
Setting Options Description
Projector Name Up to 16 Enter a name to identify the projector
alphanumeric over the network.
characters
(do not use " * + ,
/ : ; < = > ? [ \ ] ` |
spaces)
Web Control Up to 8 Enter a password for accessing the
Password alphanumeric projector over the Web. (Default user
characters name is EPSONWEB; default password is
admin.)
(do not use * :
spaces)
Projector Keyword On Set to On to enable a security password
to prevent access to the projector by
Off
anyone not in the room with it. You
must enter a displayed, randomized
keyword from a computer using the
EasyMP Network Projection and
EasyMP Multi PC Projection software to
access the projector.
111
Projector Network Settings - Network Menu
Setting Options Description Setting Options Description
Connection Mode Quick Select the type of wireless connection: SSID Display On Select whether to display the SSID on the
network standby screen.
Advanced Quick: lets you quickly connect to one Off
computer.
IP Address Display On Select whether to display the IP address
The projector becomes an easy access
on the network standby screen.
Off
point. Select the type of security and set
passphrase in the Security menu as
necessary to use EasyMP Network
Projection to connect in Quick
Network Menu - Security Menu
connection mode.
Advanced: lets you connect to multiple
Settings on the Security menu let you select the type of security and security
computers over a wireless network access
settings that match the network you are connecting the projector to.
point. The connection is established in
s Network > Network Configuration > Security
infrastructure mode.
Channel 1ch In Quick connection mode, selects the
frequency band (channel) used by the
6ch
wireless LAN.
11ch
SSID Up to 32 Sets the SSID (network name) of the
alphanumeric wireless LAN system the projector is
characters connecting to.
Search Access Point To Search View Search for available wireless network
access points in Advanced connection
mode. Depending on the access point
settings, they may not be displayed in the
list. You must set security separately.
IP Settings DHCP DHCP: set to On if your network assigns
addresses automatically; set to Off to
IP Address
manually enter the network's IP
Subnet Mask
Address, Subnet Mask, and Gateway
Gateway Address
Address using 0 to 255 for each address
field.
Setting Options Description
Do not use these addresses: 0.0.0.0,
Security Open Selects the type of security used on the
127.x.x.x or 224.0.0.0 through
wireless network.
WPA2-PSK
255.255.255.255 (where x is a number
When setting security, follow the
WPA/WPA2-PSK
from 0 to 255) for IP Address and
instructions from the administrator of
Gateway Address and 0.0.0.0 and
the network system you want to connect
255.255.255.255 for Subnet Mask.
to.
112
Projector Network Settings - Network Menu
or warning occurs in the projector.
s Network > Network Configuration > Mail
Setting Options Description
Passphrase Various For WPA2-PSK and WPA/WPA2-PSK
passphrases from 8 security, selects the pre-shared
to 32 characters passphrase used on the network.
(when entering When the passphrase is entered and the
from a Web [Enter] button is pressed, the value is set
browser: various and displayed as an asterisk (*).
passphrases from 8
When connecting using EasyMP
to 63 characters)
Network Projection, you do not need to
input the passphrase on the computer if
the passphrase has not been changed
from the default.
We recommend changing the passphrase
periodically for security. If the network
settings are initialized, it returns to the
initial passphrase.
Type of security
Setting Options Description
When connecting to a wireless network in Advanced connection mode, it is
Mail Notification On Set to On to send an email to the preset
strongly recommended that you set security.
addresses when a problem or warning
Off
occurs with a projector.
WPA is an encryption standard that improves the security for wireless
networks. The projector supports TKIP and AES encryption methods.
SMTP Server IP address Enter the IP address for the projector's
SMTP server using 0 to 255 for each
WPA also includes user authentication functions. WPA authentication
address field.
provides two methods: using an authentication server, or authenticating
Do not use these addresses: 127.x.x.x or
between a computer and an access point without using a server. This
224.0.0.0 through 255.255.255.255
projector supports the latter method, without a server.
(where x is a number from 0 to 255).
Port Number 1 to 65535 (default Select a number for the SMTP server
For setting details, follow the instructions from your network
is 25) Port Number.
administrator.
a
Address 1 Setting Up to 32 Enter the e-mail address, and select the
alphanumeric alerts you want to receive. Repeat for up
Address 2 Setting
characters to 3 addresses.
Address 3 Setting
Network Menu - Mail Menu
(do not use " ( ) , : ;
< > [ \] spaces)
Settings on the Mail menu let you receive an email notification if a problem
113
Projector Network Settings - Network Menu
Setting Options Description
Network Menu - Others Menu
Bonjour On Set to On when connecting to the
network using Bonjour.
Settings on the Others menu let you select other network settings.
Off
See Apple's Web site for more
s Network > Network Configuration > Others
information on the Bonjour service.
http://www.apple.com/
Message On Set to On to enable EPSON Message
Broadcasting Broadcasting feature.
Off
You can download Message Broadcasting
and its Operation Guide from the
following Web site.
http://www.epson.com/
Network Menu - Reset Menu
Settings on the Reset menu let you reset all of the network settings.
s Network > Network Configuration > Reset
Setting Options Description
SNMP On Set to On to monitor the projector using
SNMP. To monitor the projector, you
Off
need to install the SNMP manager
program on your computer. SNMP
should be managed by a network
administrator.
The default value is Off.
Trap IP Address 1 IP address Enter up to two IP addresses to receive
SNMP notifications, using 0 to 255 for
Trap IP Address 2
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
114
Projector Network Settings - Network Menu
Setting Options Description
Reset network Yes Select Yes to reset all network settings.
settings.
No
115
Projector Setup Settings - ECO Menu
Settings on the ECO menu let you customize projector functions to save
Setting Options Description
power.
Sleep Mode On Automatically turns off the projector
after an interval of inactivity (when On).
When you select a power-saving setting, a leaf icon appears next to the menu
Off
item.
Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode.
Lens Cover Timer On Automatically turns off the projector
after 30 minutes if the lens cover is
Off
closed (when On).
A/V Mute Timer On Automatically turns off the projector
after 30 minutes if A/V Mute is enabled
Off
(when On).
Standby Mode Communication Communication On indicates that the
On projector can be monitored over a
network when the projector is in standby
Communication
mode. Enable this setting to allow the
Off
following operations to occur when the
projector is in standby mode:
Monitor and control the projector over
a network
ECO Display On Displays a leaf icon in the bottom left
corner of the projected screen to indicate
Off
Setting Options Description
the power-saving status when the lamp
brightness changes (when On).
Power Normal Selects the brightness mode of the
Consumption projector lamp:
ECO
Reset Resets all adjustment values on the ECO
Normal: sets maximum lamp brightness.
menu to their default settings, except for
Standby Mode.
ECO: reduces lamp brightness and fan
noise, and saves power and lamp life.
You cannot select settings when you use
your projector at high altitude or in
When the Sleep Mode Timer setting is enabled, the lamp dims for a
locations subject to high temperatures.
short time before the timer limit is reached and the projector turns
a
off.
Light Optimizer On When set to On, the lamp brightness is
When the Lens Cover Timer or A/V Mute Timer settings are
adjusted according to the projected
(Available when Off
enabled, the lamp uses less power when the lens cover is closed or
image. This helps to reduce the power
Power
A/V Mute is activated.
consumption by lowering the lamp
Consumption is set
brightness according to the scene being
to Normal.)
projected.
gg Related Links
The setting is stored for each Color
• "Projector Setup Settings - Extended Menu" p.107
Mode.
116
Projector Information Display - Info Menu
You can display information about the projector and version by viewing the
Info Menu - Projector Info Menu
Info menu. However, you cannot change any settings in the menu.
You can display information about the projector and input sources by viewing
the Projector Info menu in the projector's Info menu.
Information item Description
Projector Info Displays the projector information.
Version Displays the projector's firmware version.
The available settings depend on the current input source. The lamp
usage timer does not register any hours until you have used the lamp
a
for at least 10 hours.
gg Related Links
• "Info Menu - Projector Info Menu" p.116
Information item Description
Lamp Hours Displays the number of hours (H) the lamp has been
used in Normal and ECO Power Consumption modes;
if the information is displayed in yellow, obtain a
genuine Epson replacement lamp soon.
Source Displays the name of the port to which the current
input source is connected.
Input Signal Displays the input signal setting of the current input
source.
Resolution Displays the resolution of the current input source.
117
Projector Information Display - Info Menu
Information item Description Event ID Cause and solution
code
Video Signal Displays the video signal format of the current input
source. 0484 Communication with computer was disconnected. Restart the
network software.
Refresh Rate Displays the refresh rate of the current input source.
0483 The network software quit unexpectedly. Check the network
Sync Info Displays information that may be needed by a service
communication status, then turn the projector off and then on again.
technician. 04FE
Status Displays information about projector problems that 0479 A projector system error has occurred. Turn the projector off and
may be needed by a service technician. then on again.
04FF
Serial Number Displays the projector's serial number.
0891 Cannot find an access point with the same SSID. Set your computer,
Event ID Displays the Event ID number corresponding to a access point, and projector to the same SSID.
specific projector problem; see the list of Event ID
0892 The WPA/WPA2 authentication type does not match. Make sure the
codes.
wireless network security settings are correct.
0893 The TKIP/AES encryption type does not match. Make sure the
gg Related Links
wireless network security settings are correct.
• "Event ID Code List" p.117
0894 Communication with an unauthorized access point was
disconnected. Contact your network administrator.
Event ID Code List
0898 Failed to acquire DHCP. Make sure the DHCP server is operating
correctly. If you are not using DHCP, set the DHCP setting to Off in
If the Event ID option on the Info menu displays a code number, check this
the projector's Network menu.
list of Event ID codes for the solution to the projector problem associated
s Network > Wireless LAN > IP Settings > DHCP
with the code.
0899 Other communication errors.
If you cannot resolve the problem, contact your network administrator or
Epson for technical support.
Event ID Cause and solution
code
0432 The network software did not start. Turn the projector off and then
on again.
0435
0434 Unstable network communication. Check the network
communication status, wait a few moments, and try connecting to
0481
the network again.
0482
0485
0433 Cannot display the transferred images. Restart the network software.
118
Projector Reset Options - Reset Menu
• Password
You can reset most of the projector settings to their default values using the
Reset All option on the Reset menu.
You can also reset the projector's lamp usage timer to zero when you replace
the lamp using the Reset Lamp Hours option.
You cannot reset the following settings using the Reset All option:
• Input Signal
• Zoom
• User's Logo
• Language
Network menu items
• Lamp Hours
119
Copy Menu Settings to Another Projector (Batch Setup)
projector's indicators have turned off.
After selecting the projector's menu settings for one projector, you can save
b
Connect an empty USB flash drive directly to the projector's USB-A
the settings to a USB flash drive or a computer connected with a USB cable to port.
copy settings to another projector, as long as they are the same model.
c
Hold down the [Esc] button on the remote control or the control panel
Menu settings such as the following are not copied to the other projector.
and connect the power cord to the projector.
Network menu settings (except for the Mail menu and the Others menu)
Lamp Hours and Status from the Info menu
d
When all of the projector's indicators turn on, release the [Esc] button.
The indicators start flashing and the batch setup file is written to the
Perform batch setup before adjusting the image settings such as
USB flash drive. When writing is finished, the projector turns off.
Keystone. Since image adjustment values are also copied to another
a
projector, the adjustments you made before performing the batch setup
Caution
are overwritten and the projected screen you adjusted may change.
Do not disconnect the power cord or the USB flash drive from the projector
When copying the menu settings from one projector to another, user's
while the file is being written. If the power cord or USB flash drive is
logo is also copied. Do not register the information that you do not
disconnected, the projector may not start correctly.
want to share between multiple projector as a user's logo.
e
Remove the USB flash drive.
Caution
Epson takes no responsibility for batch setup failures and associated repair costs
The file name for the batch setup file is PJCONFDATA.bin. If
due to power outages, communication errors, or other problems that may cause
you need to change the file name, add text after PJCONFDATA
a
such failures.
using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not be
gg Related Links
able to recognize the file correctly.
• "Performing Batch Setup Using a USB Flash Drive" p.119
• "Performing Batch Setup Using a USB Cable" p.120
f
Disconnect the power cord from the projector to which you want to
copy settings, and check that all of the projector's indicators have
Performing Batch Setup Using a USB Flash Drive
turned off.
You can copy menu settings from one projector to another of the same model
g
Connect the USB flash drive containing the saved batch setup file to the
using a USB flash drive.
projector's USB-A port.
The USB flash drive must use a FAT format and not incorporate any
h
Hold down the [Menu] button on the remote control or the control
security function. Delete any files on the drive before using it for batch
a
panel and connect the power cord to the projector.
setup or the settings may not be saved correctly.
i
When all of the projector's indicators turn on, release the [Menu]
button. (The indicators remain on for approximately 75 seconds.)
a
Disconnect the power cord from the projector, and check that all of the
120
Copy Menu Settings to Another Projector (Batch Setup)
the computer.
When all of the indicators start flashing, the settings are being written.
The file name for the batch setup file is PJCONFDATA.bin. If
When writing is finished, the projector turns off.
you need to change the file name, add text after PJCONFDATA
a
using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not be
Caution
able to recognize the file correctly.
Do not disconnect the power cord or the USB flash drive from the projector
while the file is being written. If the power cord or drive is disconnected,
the projector may not start correctly.
f
Eject the USB device (Windows) or drag the removable disk icon to the
Trash (OS X).
j
Remove the USB flash drive.
g
Disconnect the USB cable.
The projector turns off.
Performing Batch Setup Using a USB Cable
h
Disconnect the power cord from the projector to which you want to
You can copy menu settings from one projector to another of the same model
copy settings, and check that all of the projector's indicators have
by connecting the computer and projector with a USB cable.
turned off.
You can use this batch setup method with the following operating
i
Connect the USB cable to the computer's USB port and to the
system versions:
a
projector's USB-B port.
Windows Vista and later
OS X 10.5.3 and later
j
Hold down the [Menu] button on the remote control or the control
panel and connect the power cord to the projector.
a
Disconnect the power cord from the projector, and check that all of the
k
When all of the projector's indicators turn on, release the [Menu]
projector's indicators have turned off.
button.
b
Connect a USB cable to the computer's USB port and to the projector's
The computer recognizes the projector as a removable disk.
USB-B port.
l
Copy the batch setup file (PJCONFDATA.bin) that you saved to your
c
Hold down the [Esc] button on the remote control or the control panel
computer to the top level folder of the removable disk.
and connect the power cord to the projector.
Do not copy any files or folders other than the batch setup file to
d
When all of the projector's indicators turn on, release the [Esc] button.
the removable disk.
a
The computer recognizes the projector as a removable disk.
m
Eject the USB device (Windows) or drag the removable disk icon to the
e
Open the removable disk icon or folder, and save the batch setup file to
Trash (OS X).
121
Copy Menu Settings to Another Projector (Batch Setup)
n
Disconnect the USB cable.
Indicator status Problem and solution
When all of the indicators start flashing, the settings are being written.
Writing the settings may have failed and an error may
When writing is finished, the projector turns off.
have occurred in the projector's firmware.
Stop using the projector, remove the power plug from
the electrical outlet. Contact Epson for help.
Caution
Do not disconnect the power cord from the projector while the file is being
written. If the power cord is disconnected, the projector may not start
correctly.
Power: Blue - flashing
fast
gg Related Links
Status: Blue - flashing
• "Batch Setup Error Notification" p.121
fast
Lamp: Orange - flashing
fast
Batch Setup Error Notification
Temp: Orange - flashing
The projector's indicators notify you if an error occurs during a batch setup
fast
operation. Check the status of the projector's indicators and follow the
instructions described in the table here.
Indicator status Problem and solution
The batch setup file may be corrupt, or the USB flash
drive or USB cable may not be connected correctly.
Disconnect the USB flash drive or the USB cable,
unplug and then plug in the projector's power cord, and
then try again.
Lamp: Orange - flashing
fast
Temp: Orange - flashing
fast
Maintaining the Projector
You may need to clean the projector's lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation.
The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer.
Warning
Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual. Dangerous
electrical voltages in the projector can injure you severely.
gg Related Links
• "Cleaning the Lens" p.123
• "Cleaning the Projector Case" p.124
• "Air Filter and Vent Maintenance" p.125
• "Projector Lamp Maintenance" p.127
• "Replacing the Remote Control Batteries" p.132
123
Cleaning the Lens
Clean the projector's lens periodically, or whenever you notice dust or
smudges on the surface.
• To remove dust or smudges, gently wipe the lens with lens-cleaning paper.
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens
cleaner and gently wipe the lens. Do not spray any liquid directly on the
lens.
Warning
Do not use a lens cleaner that contains flammable gas. The high heat generated
by the projector lamp may cause a fire.
Attention
Do not use glass cleaner or any harsh materials to clean the lens and do not
subject the lens to any impacts; otherwise, it could be damaged. Do not use
canned air, or the gases may leave a flammable residue.
124
Cleaning the Projector Case
Before cleaning the projector case, turn off the projector and unplug the
power cord.
• To remove dust or dirt, use a soft, dry, lint-free cloth.
• To remove stubborn dirt, use a soft cloth moistened with water and mild
soap. Do not spray liquid directly on the projector.
Attention
Do not use wax, alcohol, benzene, paint thinner, or other chemicals to clean the
projector case. These can damage the case. Do not use canned air, or the gases
may leave a flammable residue.
125
Air Filter and Vent Maintenance
Regular filter maintenance is important to maintaining your projector. Clean
You can remove the air filter so that you can clean both sides. Do
the air filer when a message appears telling you the temperature inside the
not rinse the air filter in water, or use any detergent or solvent to
a
projector has reached a high level. It is recommended that you clean these
clean it.
parts at least once every three months. Clean them more often than this if you
use the projector in a particularly dusty environment.
Attention
Do not use canned air. The gases may leave a flammable residue or push
Attention
dust and debris into the projector's optics or other sensitive areas.
If regular maintenance is not performed, your Epson projector will notify you
when the temperature inside the projector has reached a high level. Do not wait
until this warning appears to maintain your projector filter as prolonged exposure
c
If dust is difficult to remove or the air filter is damaged, replace the air
to high temperatures may reduce the life of your projector or lamp.
filter.
gg Related Links
• "Cleaning the Air Filter and Vents" p.125
Replacing the Air Filter
• "Replacing the Air Filter" p.125
You need to replace the air filter in the following situations:
Cleaning the Air Filter and Vents
• After cleaning the air filter, you see a message telling you to clean or replace
it
Clean the projector's air filter or vents if they get dusty, or if you see a
• The air filter is torn or damaged
message telling you to clean them.
You can replace the air filter while the projector is mounted to the ceiling or
placed on a table.
a
Turn off the projector and unplug the power cord.
a
Turn off the projector and unplug the power cord.
b
Gently remove the dust using a small vacuum designed for computers
or a very soft brush (such as a paintbrush).
126
Air Filter and Vent Maintenance
b
Open the air filter cover.
Dispose of used air filters according to local regulations.
Filter frame: ABS
a
Filter: Polyurethane foam
d
Place the new air filter in the projector as shown and push gently until
it clicks into place.
c
Grip the air filter tab and pull the air filter straight out.
e
Close the air filter cover.
gg Related Links
• "Replacement Parts" p.148
127
Projector Lamp Maintenance
screw securing the lamp cover.
The projector monitors the number of hours the lamp is used and displays
Attention
this information in the projector's menu system.
If you continue to use the lamp after the replacement period has passed, the
possibility that the lamp may explode increases. When the lamp replacement
Replace the lamp as soon as possible when the following occurs:
message appears, replace the lamp with a new one as soon as possible, even if it
• The projected image gets darker or quality declines
is still working.
• A message is displayed when you turn on the projector telling you to replace
Do not repeatedly turn off the power and then immediately turn it back on.
the lamp (the message is displayed 100 hours before the expected end of the
Turning the power on and off frequently may shorten the lamp's operating life.
lamp life and appears for 30 seconds)
Depending on the characteristics of the lamp and the way it has been used, the
lamp may become darker or stop working before the lamp warning message
appears. You should always have a spare lamp unit ready in case it is needed.
We recommend the use of genuine Epson replacement lamps. The use of non-
genuine lamps may affect projection quality and safety. Any damage or
malfunction caused by the use of non-genuine lamps may not be covered by
Epson's warranty.
gg Related Links
• "Replacing the Lamp" p.127
• "Resetting the Lamp Timer" p.130
• "Projector Specifications" p.155
• The power indicator is flashing blue, and the projector's lamp indicator is
flashing orange.
Replacing the Lamp
You can replace the lamp while the projector is placed on a table or mounted
to the ceiling.
Warning
Let the lamp fully cool before replacing it to avoid injury.
Never disassemble or modify the lamp. If a modified or disassembled lamp is
installed in the projector, it could cause a fire, electric shock, or other damage or
injury.
a
Turn off the projector and unplug the power cord.
b
Allow the projector lamp to cool down for at least one hour.
c
Use the screwdriver included with the replacement lamp to loosen the
128
Projector Lamp Maintenance
d
Slide the lamp cover out and lift it off.
Warning
When replacing the lamp, there is a possibility that the lamp may be
broken. If replacing the lamp of a projector which has been installed on the
ceiling, you should always assume that the lamp is cracked, and you should
stand to the side of the lamp cover, not underneath it. Remove the lamp
cover gently. Be careful when removing the lamp cover as shards of glass
may fall out and could cause an injury. If any shards of glass get into your
eyes or mouth, contact a doctor immediately.
e
Loosen the screws securing the lamp to the projector. The screws do
not come all the way out.
129
Projector Lamp Maintenance
f
Grip the raised section of the lamp and remove it.
g
Gently insert the new lamp into the projector. If it does not fit easily,
make sure it is facing the right way.
If you notice the lamp is cracked when removing the lamp,
contact Epson for help.
Attention
a
Do not touch any glass on the lamp assembly to avoid premature lamp
The lamp(s) in this product contain mercury (Hg). Check your
failure.
local laws and regulations regarding disposal or recycling. Do
not put in the trash.
130
Projector Lamp Maintenance
h
Push in the lamp firmly and tighten the screws to secure it.
Make sure the lamp cover is securely installed or the lamp will
not turn on.
a
Do not replace the lamp cover with too much force and make
sure the lamp cover is not deformed.
Reset the lamp timer to zero to monitor the new lamp's usage.
gg Related Links
• "Replacement Parts" p.148
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the
lamp replacement message and to monitor lamp usage correctly.
Do not reset the lamp timer if you have not replaced the lamp to avoid
inaccurate lamp usage information.
a
i
Replace the lamp cover and tighten the screw to secure it.
a
Turn on the projector.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Reset menu and press [Enter].
131
Projector Lamp Maintenance
f
Press [Menu] or [Esc] to exit the menus.
d
Select Reset Lamp Hours and press [Enter].
You see a prompt asking if you want to reset the lamp hours.
e
Select Yes and press [Enter].
132
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the
batteries as soon as they run out.
Warning
Check the positions of the (+) and (–) marks inside the battery holder to
ensure the batteries are inserted the correct way. If the batteries are not used
Attention
correctly, they could explode or leak causing a fire, injury, or damage to the
Make sure you read the Safety Instructions before handling the batteries.
product.
a
Open the battery cover as shown.
d
Close the battery cover and press it down until it clicks into place.
b
Remove the old batteries.
c
Insert the batteries with the + and ends facing as shown.
Solving Problems
Check the solutions in these sections if you have any problems using the projector.
gg Related Links
• "Projection Problems" p.134
• "Projector Indicators Status" p.135
• "Using the Projector Help Displays" p.137
• "Solving Image or Sound Problems" p.138
• "Solving Projector or Remote Control Operation Problems" p.144
• "Solving Network Problems" p.146
134
Projection Problems
If none of these solutions help, contact Epson for technical support.
If the projector is not working properly, turn it off, unplug it, and then plug it
back in and turn it on.
If this does not solve the problem, check the following:
• The indicators on the projector may indicate the problem.
• The projector's Help system can display information about common
problems.
• The solutions in this manual can help you solve many problems.
135
Projector Indicators Status
The indicators on the projector indicate the projector status and let you know
Indicator and status Problem and solutions
when a problem occurs. Check the status and color of the indicators and then
Power: Lit blue Standby, sleep mode, or monitoring.
refer to this table for a solution.
Status: Off When you press the power button, projection starts.
Lamp: Off
Temp: Off
Power: Flashing blue Preparing for monitoring and all features are disabled.
Status: Off
Lamp: Off
Temp: Off
Power: Flashing blue Projector is too hot.
Status: Indicator status
Make sure that the vents and air filter are not clogged
varies
with dust or obstructed by nearby objects.
Lamp: Indicator status
Clean or replace the air filter.
varies
Make sure the environmental temperature is not too
Temp: Flashing orange
hot.
A
Power indicator
Power: Off Projector has overheated and turned off. Leave it turned
B
Status indicator
off to cool down for 5 minutes.
Status: Flashing blue
C
Wireless LAN indicator (operates only on EB-U32 and EB-W32)
Make sure that the vents and air filter are not clogged
Lamp: Off
with dust or obstructed by nearby objects.
D
Lamp indicator
Temp: Lit orange
Clean or replace the air filter.
E
Temp (temperature) indicator
If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Extended menu.
Indicator and status Problem and solutions
s Extended > Operation > High Altitude Mode
Power: Lit blue Normal operation.
If the problem persists, unplug the projector and
Status: Lit blue
contact Epson for help.
Lamp: Off
Temp: Off
Power: Lit blue Warming up or shutting down. When warming up, wait
about 30 seconds for an image to appear.
Status: Flashing blue
All buttons are disabled during warm-up and shutting
Lamp: Off
down.
Temp: Off
136
Projector Indicators Status
Indicator and status Problem and solutions Indicator and status Problem and solutions
Power: Off Lamp has a problem. Power: Off Power error (Ballast). Turn the projector off, unplug it,
and contact Epson for help.
Status: Flashing blue Status: Flashing blue
Check to see if the lamp is burned out, broken, or
installed incorrectly. Reseat or replace the lamp as
Lamp: Lit orange Lamp: Lit orange
necessary.
Temp: Off Temp: Lit orange
Clean the air filter.
If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Wireless LAN indicator Problem and solutions
Extended menu.
and status
s Extended > Operation > High Altitude Mode
Lit blue Wireless LAN is available.
If the problem persists, unplug the projector and
Flashing blue (quickly) Connecting to a device.
contact Epson for help.
Lamp cover has a problem.
Flashing blue (slowly) An error has occurred. Turn off the projector and restart
it.
Check that the lamp and the lamp cover are securely
If this does not solve the problem, contact Epson for
installed. The lamp does not turn on if the lamp and
help.
the lamp cover are not installed correctly.
Off Wireless LAN is not available. Make sure the Wireless
Power: Flashing blue Replace the lamp soon to avoid damage. Do not
LAN settings are correct.
continue using the projector.
Status: Indicator status
varies
Lamp: Flashing orange
If the indicators display a pattern not listed in the table above, turn the
Temp: Indicator status
projector off, unplug it, and contact Epson for help.
a
varies
Power: Off A fan or sensor has a problem. Turn the projector off,
gg Related Links
unplug it, and contact Epson for help.
Status: Flashing blue
• "Cleaning the Air Filter and Vents" p.125
Lamp: Off
• "Replacing the Air Filter" p.125
Temp: Flashing orange
• "Replacing the Lamp" p.127
Power: Off Internal projector error. Turn the projector off, unplug
it, and contact Epson for help.
Status: Flashing blue
Lamp: Flashing orange
Temp: Off
Power: Off Auto iris error. Turn the projector off, unplug it, and
contact Epson for help.
Status: Flashing blue
Lamp: Flashing orange
Temp: Flashing orange
137
Using the Projector Help Displays
The Help menu is displayed.
You can display information to help you solve common problems using the
d
Use the up and down arrow buttons to highlight the problem you want
projector's Help system. to solve.
a
Turn on the projector.
b
Press the [Home] button on the control panel or remote control.
e
Press [Enter] to view the solutions.
f
Perform one of the following actions when you are finished.
To select another problem to solve, press [Esc].
To exit the help system, press [Menu].
c
Select Help on the Home screen.
138
Solving Image or Sound Problems
blank screen saver.
Check the solutions in these sections if you have any problems with projected
• Check the settings on the projector's Signal menu to make sure they are
images or sound.
correct for the current video source.
• Adjust the Brightness setting in the projector's Image menu or select the
gg Related Links
Normal as the Power Consumption setting in the projector's ECO menu.
• "Solutions When No Image Appears" p.138
• "Solutions When Image is Incorrect Using the USB Display Function" p.138
• Check the Display setting in the projector's Extended menu to make sure
• "Solutions When "No Signal" Message Appears" p.139
Messages is set to On.
• "Solutions When "Not Supported" Message Appears" p.140
• If the projector does not respond when you press the control panel buttons,
• "Solutions When Only a Partial Image Appears" p.140
the buttons may be locked. Unlock the buttons.
• "Solutions When the Image is not Rectangular" p.140
• If the projector does not respond when you press buttons on the remote
• "Solutions When the Image Contains Noise or Static" p.141
control, make sure the remote receivers are turned on.
• "Solutions When the Image is Fuzzy or Blurry" p.141
• For images projected with Windows Media Center, reduce the screen size
• "Solutions When the Image Brightness or Colors are Incorrect" p.142
from full screen mode.
• "Solutions to Sound Problems" p.142
• For images projected from applications using Windows DirectX, turn off
• "Solutions When Image File Names are not Displayed Correctly in PC Free"
DirectX functions.
p.143
• The projector may not be able to project copyrighted videos that you play
back on a computer. For more details, see the manual supplied with the
Solutions When No Image Appears
computer.
If no image appears, try the following solutions:
gg Related Links
• Press the power button to turn the power on.
• "Input Signal Settings - Signal Menu" p.103
• "Image Quality Settings - Image Menu" p.101
• Make sure the lens cover is open all the way.
• "Projector Setup Settings - ECO Menu" p.115
• Press the [A/V Mute] button on the remote control to see if the image was
• "Projector Setup Settings - Extended Menu" p.107
temporarily turned off.
• "Unlocking the Projector's Buttons" p.79
• If the projector does not respond when you press the [A/V Mute] button, an
internal error may have occurred in the projector. Contact Epson for help.
Solutions When Image is Incorrect Using the USB
• Make sure all necessary cables are securely connected and the power is on
Display Function
for the projector and connected video sources.
• Make sure the image being projected is not completely black (only when
If no image appears or if the image appears incorrectly using the USB Display
projecting computer images).
function, try the following solutions:
• Make sure the projector's menu settings are correct.
• Press the [USB] button on the remote control.
• Press the projector's power button to wake it from standby or sleep mode.
• Make sure the Epson USB Display software has been installed correctly.
Also, check if the connected computer is in sleep mode or displaying a
Install it manually if necessary.
139
Solving Image or Sound Problems
• Connect the video source directly to the projector.
• For OS X, select the USB Display icon in the Dock folder. If the icon does • If you are projecting from a laptop computer, make sure it is set up to
not appear on the Dock, double-click USB Display in the Applications display on an external monitor.
folder.
• If necessary, turn off the projector and the connected computer or video
If you select Exit from the USB Display icon menu on the Dock, USB
source, and then turn them back on.
Display does not start automatically when you connect the USB cable.
• If you are projecting from an HDMI source, replace the HDMI cable with
• When using a computer running Windows 2000 under user authority, a
the shorter one.
Windows error message is displayed and you may not be able to use the
gg Related Links
software. If this occurs, try updating Windows to the latest version, restart
• "Displaying From a Laptop" p.139
your computer, and try to connect again. Contact Epson for more details.
• "Displaying From a Mac Laptop" p.139
• For images projected with Windows Media Center, reduce the screen size
from full screen mode.
Displaying From a Laptop
• For images projected from applications using Windows DirectX, turn off
DirectX functions.
If the message "No Signal" is displayed when projecting from a laptop, you
need to set up the laptop to display on an external monitor.
• If the mouse cursor flickers, select Make the movement of the mouse
pointer smooth in the Epson USB Display Settings program on your
computer (this feature is not available for Windows 2000).
a
Hold down the laptop's Fn key and press the key labeled with a monitor
icon or CRT/LCD. (See your laptop manual for details.) Wait a few
• Turn off the Transfer layered window setting in the Epson USB Display
seconds for an image to appear.
Settings program on your computer.
• For projectors with a resolution of WUXGA (1920 × 1200), if you change
b
To display on the laptop's monitor and the projector, try pressing the
the computer resolution during projection, the performance and quality of
same keys again.
the video may decline.
c
If the same image is not displayed by the laptop and projector, check
gg Related Links
the Windows Display utility to make sure the external monitor port is
• "Connecting to a Computer for USB Video and Audio" p.22
enabled and extended desktop mode is disabled. (See your computer or
Windows manual for instructions.)
Solutions When "No Signal" Message Appears
d
If necessary, check your video card settings and set the multiple display
If the "No Signal" message appears, try the following solutions:
option to Clone or Mirror.
• Press the [Source Search] button and wait a few seconds for an image to
appear.
Displaying From a Mac Laptop
• Turn on the connected computer or video source, and press play to begin
your presentation, if necessary.
If the message "No Signal" is displayed when projecting from a Mac laptop,
you need to set up the laptop for mirrored display. (See your laptop manual
• Check that all cables required for projection are securely connected.
for details.)
140
Solving Image or Sound Problems
• "Correcting the Image Shape with Quick Corner" p.43
a
Open the System Preferences utility and select Displays.
• Check your computer display settings to disable dual display and set the
resolution within the projector's limits. (See your computer manual for
b
Select the Display or Color LCD option, if necessary. details.)
• Check the resolution assigned to your presentation files to see if they are
c
Click the Arrange or Arrangement tab.
created for a different resolution. (See your software help for details.)
• Make sure you selected the correct projection mode. You can select Front,
d
Select Mirror Displays.
Front/Ceiling, Rear, or Rear/Ceiling as the Projection setting in the
projector's Extended menu.
gg Related Links
Solutions When "Not Supported" Message Appears
• "Input Signal Settings - Signal Menu" p.103
If the message "Not supported" is displayed, try the following solutions:
• "Projector Setup Settings - Extended Menu" p.107
• "Supported Monitor Display Resolutions" p.153
• Make sure the correct input signal is selected on the projector's Signal
menu.
• Make sure the computer's display resolution does not exceed the projector's
Solutions When the Image is not Rectangular
resolution and frequency limits. If necessary, select a different display
If the projected image is not evenly rectangular, try the following solutions:
resolution for your computer. (See your computer manual for details.)
• Place the projector directly in front of the center of the screen, facing it
gg Related Links
squarely, if possible.
• "Input Signal Settings - Signal Menu" p.103
• If you adjusted the projector height using the projector feet, press the
keystone buttons on the projector to adjust the image shape.
Solutions When Only a Partial Image Appears
• Turn on horizontal keystone slider in the projector's Settings menu. Then,
adjust the slider until the image is evenly rectangular.
If only a partial computer image appears, try the following solutions:
s Settings > Keystone > H/V-Keystone > H-Keystone Adjuster
• Press the [Auto] button on the remote control to optimize the image signal.
• Turn on automatic adjustment in the projector's Settings menu. The
• Try adjusting the image position using the Position setting in the
projector automatically corrects the image every time you move the
projector's Signal menu.
projector.
• Press the [Aspect] button on the remote control to select a different image
s Settings > Keystone > H/V-Keystone > Auto V-Keystone
aspect ratio.
• Adjust the Quick Corner setting to correct the image shape.
• Change the Resolution setting in the projector's Signal menu according to
s Settings > Keystone > Quick Corner
the signal for the connected equipment.
gg Related Links
• If you zoomed into or out of the image using the [E-Zoom] buttons, press
• "Auto V-Keystone" p.41
the [Esc] button until the projector returns to a full display.
• "Correcting the Image Shape with the Keystone Buttons" p.42
141
Solving Image or Sound Problems
• "Supported Monitor Display Resolutions" p.153
Solutions When the Image Contains Noise or Static Solutions When the Image is Fuzzy or Blurry
If the projected image contains electronic interference (noise) or static, try the If the projected image is fuzzy or blurry, try the following solutions:
following solutions:
• Adjust the image focus.
• Check the cables connecting your computer or video source to the
• Clean the projector lens.
projector. They should be:
• Separated from the power cord to prevent interference
To avoid condensation on the lens after bringing the projector in
from a cold environment, let the projector warm up to room
• Securely connected at both ends
a
temperature before using it.
• Not connected to an extension cable
• No longer than 3 meters
• Position the projector close enough to the screen.
• Check the settings on the projector's Signal menu to make sure they match
• Position the projector so the keystone adjustment angle is not so wide that it
the video source.
distorts the image.
• If available for your video source, adjust the Deinteracing and Noise
• Turn on automatic adjustment in the projector's Settings menu.
Reduction settings in the Image menu.
s Settings > Keystone > H/V-Keystone > Auto V-Keystone
• Select a computer video resolution and refresh rate that are compatible with
• Adjust the Sharpness setting in the projector's Image menu to improve
the projector.
image quality.
• If you are projecting from a computer, press the [Auto] button on the
• If you are projecting from a computer, press the [Auto] button on the
remote control to automatically adjust the Tracking and Sync. settings. If
remote control to automatically adjust the tracking and sync. If any bands
the images are not adjusted correctly, manually adjust the Tracking and
or overall blurriness remain, display a uniformly patterned image on the
Sync. settings in the projector's Signal menu.
screen and manually adjust the Tracking and Sync. settings in the
• Select Auto as the Resolution setting in the projector's Signal menu.
projector's Signal menu.
• If you adjusted the image shape using the projector controls, try decreasing
• If you are projecting from a computer, use a lower resolution or select a
the Sharpness setting in the projector's Image menu to improve image
resolution that matches the projector's native resolution.
quality.
gg Related Links• If you connected an extension power cable, try projecting without it to see if
• "Input Signal Settings - Signal Menu" p.103
it caused interference in the signal.
• "Image Quality Settings - Image Menu" p.101
• If you are using the USB Display function, turn off the Transfer layered
• "Supported Monitor Display Resolutions" p.153
window setting in the Epson USB Display Settings program on your
• "Focusing the Image Using the Focus Ring" p.48
computer.
• "Cleaning the Lens" p.123
gg Related Links
• "Input Signal Settings - Signal Menu" p.103
• "Image Quality Settings - Image Menu" p.101
142
Solving Image or Sound Problems
• "Projector Setup Settings - ECO Menu" p.115
Solutions When the Image Brightness or Colors are Solutions to Sound Problems
Incorrect
If there is no sound or the volume is too low or high, try the following
solutions:
If the projected image is too dark or light, or the colors are incorrect, try the
following solutions:
• Adjust the projector's volume settings.
• Press the [Color Mode] button on the remote control to try different color • Press the [A/V Mute] button on the remote control to resume video and
modes for the image and environment. audio if they were temporarily stopped.
• Check your video source settings. • Check your computer or video source to make sure the volume is turned up
and the audio output is set for the correct source.
• Adjust the available settings on the projector's Image menu for the current
input source, such as Brightness, Contrast, Tint, Color Temp., and/or • Disconnect the audio cable, and then reconnect it.
Color Saturation.
• Check the audio cable connections between the projector and your video
• Make sure you selected the correct Input Signal or Video Signal setting in source.
the projector's Signal menu, if available for your image source.
• If you do not hear sound from an HDMI source, set the connected device to
s Signal > Advanced > Input Signal
PCM output.
s Signal > Advanced > Video Signal
• Make sure any connected audio cables are labeled "No Resistance".
• Make sure all the cables are securely connected to the projector and your
• If you are using the USB Display function, turn on the Output audio from
video device. If you connected long cables, try connecting shorter cables.
the projector setting in the Epson USB Display Settings program on your
• If you are using the ECO as the Power Consumption setting, try selecting
computer.
Normal in the projector's ECO menu.
• When you are connecting the projector to a Mac using an HDMI cable,
make sure your Mac supports audio through the HDMI port.
At high altitudes or locations subject to high temperatures, the image
• If the volume for the computer is set to the minimum while the projector is
may become darker and you may not be able to adjust the Power
a
set to the maximum, the noise may be mixed. Turn up the computer's
Consumption setting.
volume and turn down the projector's volume. (When you use EasyMP
Network Projection, EasyMP Multi PC Projection, USB Display or Quick
• Position the projector close enough to the screen.
Wireless Connection.)
• If the image has been progressively darkening, you may need to replace the
projector lamp soon.
gg Related Links
• "Projector Connections" p.21
gg Related Links
• "Projector Setup Settings - Extended Menu" p.107
• "Color Mode" p.53
• "Projector Setup Settings - ECO Menu" p.115
• "Input Signal Settings - Signal Menu" p.103
• "Controlling the Volume with the Volume Buttons" p.55
• "Image Quality Settings - Image Menu" p.101
143
Solving Image or Sound Problems
change the file name.
Solutions When Image File Names are not Displayed
Correctly in PC Free
If any file names are longer than the display area or include unsupported
symbols, the file names are shortened or changed in PC Free. Shorten or
144
Solving Projector or Remote Control Operation Problems
projector's Settings menu is turned on if available.
Check the solutions in these sections if you have problems operating the
gg Related Links
projector or remote control.
• "Projector Setup Settings - ECO Menu" p.115
• "Projector Indicators Status" p.135
gg Related Links
• "Projector Feature Settings - Settings Menu" p.105
• "Solutions to Projector Power or Shut-Off Problems" p.144
• "Unlocking the Projector's Buttons" p.79
• "Solutions to Problems with the Remote Control" p.144
• "Solutions to Password Problems" p.145
Solutions to Problems with the Remote Control
Solutions to Projector Power or Shut-Off Problems
If the projector does not respond to remote control commands, try the
following solutions:
If the projector does not turn on when you press the power button or it turns
• Check that the remote control batteries are installed correctly and have
off unexpectedly, try the following solutions:
power. If necessary, replace the batteries.
• Make sure the power cord is securely connected to the projector and to a
• Make sure you are operating the remote control within the reception angle
working electrical outlet.
and range of the projector.
• The projector's buttons may be locked for security. Unlock the buttons in
• Make sure the projector is not warming up or shutting down.
the Control Panel Lock setting in the projector's Settings menu or use the
• Check to see if a button on the remote control is stuck down, causing it to
remote control to turn on the projector.
enter sleep mode. Release the button to wake the remote control up.
s Settings > Lock Setting > Control Panel Lock
• Strong fluorescent lighting, direct sunlight, or infrared device signals may be
• The power cord may be defective. Disconnect the cord and contact Epson
interfering with the projector's remote receivers. Dim the lights or move the
for help.
projector away from the sun or interfering equipment.
• If the projector's lamp turns off unexpectedly, it may have entered sleep
• Make sure at least one of the remote receivers are available in the Remote
mode after a period of inactivity. Perform any operation to wake the
Receiver setting in the projector's Settings menu.
projector. To turn off sleep mode, select Off as the Sleep Mode setting in
the projector's ECO menu.
• If the Remote Receiver setting is disabled, hold down the [Menu] button on
the remote control for at least 15 seconds to reset the setting to its default.
• If the projector's lamp turns off unexpectedly, the A/V mute timer may be
enabled. To turn off the A/V mute timer, select Off as the A/V Mute Timer
• If you assigned an ID number to the projector to operate multiple projectors
setting in the projector's ECO menu.
from the remote control, you may need to check or change the ID setting.
• If the projector's lamp turns off unexpectedly, the lens cover timer may be
• If you lose the remote control, you can order another one from Epson.
enabled. To turn off the lens cover timer, select Off as the Lens Cover
gg Related Links
Timer setting in the projector's ECO menu.
• "Remote Control Operation" p.30
• If the projector's lamp turns off, the Status indicator is flashing, and the
• "Projector Feature Settings - Settings Menu" p.105
Temp indicator is lit, the projector has overheated and turned off.
• "Selecting the Projector You want to Operate" p.73
• If the power button on the remote control does not turn on the projector,
• "Replacing the Remote Control Batteries" p.132
check its batteries and make sure the Remote Receiver setting in the
145
Solving Projector or Remote Control Operation Problems
one from Epson.
Solutions to Password Problems
If you cannot enter or remember a password, try the following solutions:
• You may have turned on password protection without first setting a
password. Try entering 0000 using the remote control.
• If you have entered an incorrect password too many times and see a
message displaying a request code, write down the code and contact Epson
for help. Provide the request code and proof of ownership for assistance in
unlocking the projector.
• If you lose the remote control you cannot enter a password. Order a new
146
Solving Network Problems
projector's network Mail menu or in the network software.
Check the solutions in these sections if you have problems using the projector
• Set the Standby Mode setting to Communication On in the projector's
on a network.
ECO menu so the network software can monitor the projector in standby
mode.
gg Related Links
• Make sure your electrical outlet or power source is functioning correctly.
• "Solutions When You Cannot Access the Projector Through the Web" p.146
• "Solutions When Network Alert E-Mails are not Received" p.146
gg Related Links
• "Solutions When the Image Contains Static During Network Projection"
• "Network Menu - Mail Menu" p.112
p.146
Solutions When the Image Contains Static During
Solutions When You Cannot Access the Projector
Network Projection
Through the Web
If the projected image contains static during network projection, try the
If you are unable to access the projector through a Web browser, make sure
following solutions:
you are using the correct ID and password.
• Check for any obstacles between the access point, the computer, the mobile
• For the user ID, enter EPSONWEB. (You cannot change the user ID.)
device, and the projector, and change their positions to improve
• For the password, enter the password set in the projector's network Basic
communication.
menu. The default password is admin.
• Make sure that the access point, the computer, the mobile device and the
• Make sure you have access to the network the projector is on.
projector are not too far apart. Move them closer together and try to
connect again.
The user ID and password are case sensitive.
• If the wireless connection is slow or your projected image contains noise,
a
check for interference from other equipment, such as a Bluetooth device or
microwave. Move the interfering device farther away or expand your
wireless bandwidth.
gg Related Links
• "Network Menu - Basic Menu" p.109
• Reduce the number of connected devices if the connection speed declines.
Solutions When Network Alert E-Mails are not
Received
If you do not receive an e-mail alerting you to problems with a projector over
the network, try the following solutions:
• Make sure the projector is turned on and connected to the network
correctly. (If an error shut down the projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the
Appendix
Check these sections for the technical specifications and important notices about your projector.
gg Related Links
• "Optional Accessories and Replacement Parts" p.148
• "Screen Size and Projection Distance" p.149
• "Supported Monitor Display Resolutions" p.153
• "Projector Specifications" p.155
• "External Dimensions" p.157
• "USB Display System Requirements" p.159
• "List of Safety Symbols (corresponding to IEC60950-1 A2)" p.160
• "Glossary" p.162
• "Notices" p.164
148
Optional Accessories and Replacement Parts
Portable multi-aspect screen.
The following optional accessories and replacement parts are available. Please Computer cable ELPKC02 (1.8 m - for mini D-sub 15-pin/mini D-Sub
purchase these products as and when needed. The following list of optional 15pin)
accessories and replacement parts is current as of: March 2015. Details of Computer cable ELPKC09 (3 m - for mini D-sub 15-pin/mini D-Sub
accessories are subject to change without notice and availability may vary 15pin)
depending on the country of purchase. Computer cable ELPKC10 (20 m - for mini D-sub 15-pin/mini D-Sub
15pin)
gg Related Links
Use when connecting to the computer port.
• "Optional Accessories" p.148
Component video cable ELPKC19 (3 m - for mini D-Sub 15-pin/RCA male
• "Replacement Parts" p.148
x 3)
Use this to connect a component video source.
Optional Accessories
Wireless LAN module ELPAP10
Use this to project images from a computer via a wireless communication.
Interactive Unit ELPIU01
Quick Wireless Connection USB Key ELPAP09
Use when operating the computer screen on the projection surface.
Use when you want to quickly establish one-to-one connection between
Document Camera ELPDC06/ELPDC11/ELPDC12/ELPDC20
the projector and a component with Windows installed.
Use when projecting image such as books, OHP documents, or slides.
Ceiling pipe (450 mm) ELPFP13
Soft carrying case ELPKS63 (EB-W32/EB-W31/EB-X36/EB-X31/EB-
Ceiling pipe (700 mm) ELPFP14
S31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EB-S130/EB-X350/EB-
Use when installing the projector on a high ceiling.
X300/EB-S300)
Ceiling mount ELPMB23
Soft carrying case ELPKS67 (EB-U32/EB-U04/EB-U130)
Use when installing the projector on a ceiling.
Use this to carry the projector by hand.
60" portable screen ELPSC27
Special expertise is required to suspend the projector from a ceiling.
80" portable screen ELPSC28
Contact Epson for help.
a
100" portable screen ELPSC29
Portable roll-type screens. (aspect ratio 4:3)
70" portable screen ELPSC23
Replacement Parts
80" portable screen ELPSC24
90" portable screen ELPSC25
Lamp unit ELPLP88
Portable roll-type screens. (aspect ratio 16:10)
Use as a replacement for used lamps.
64" portable screen ELPSC31
Air filter ELPAF32
Portable magnetic screens. (aspect ratio 4:3)
Use as a replacement for used air filters.
50" portable screen ELPSC32
A compact screen that can be carried easily. (aspect ratio 4:3)
Multi Aspect Screen ELPSC26
149
Screen Size and Projection Distance
Check the table here to determine how far to place the projector from the
4:3 screen size
A B
screen based on the size of the projected image.
Minimum (Wide) to Minimum (Wide)
Maximum (Tele)
60" 122 × 91 177 - 240 -10
70" 142 × 107 207 - 280 -12
80" 163 × 122 237 - 321 -13
100" 203 × 152 297 - 401 -17
150" 305 × 229 446 - 603 -25
200" 406 × 305 595 - 805 -33
16:9 screen size
A B
Minimum (Wide) to Minimum (Wide)
Maximum (Tele)
28" 62 × 35 89 - 121 1
30" 66 × 37 96 - 130 1
50" 111 × 62 161 - 218 1
60" 133 × 75 193 - 262 2
70" 155 × 87 226 - 306 2
80" 177 × 100 258 - 349 2
A
Projection distance (cm)
100" 221 × 125 323 - 437 3
B
Distance from the center of the lens to the base of the screen (or to the top of
150" 332 × 187 486 - 657 4
the screen, if suspended from a ceiling) (cm)
200" 443 × 249 649 - 877 5
C
Center of lens
XGA (EB-X31/EB-X04/EB-X130/EB-X350/EB-X300)
SVGA (EB-S31/EB-S04/EB-S130/EB-S300)
4:3 screen size
A B
4:3 screen size
A B
Minimum (Wide) to
Minimum (Wide) to Minimum (Wide)
Maximum (Tele)
Maximum (Tele)
30" 61 × 46 89 - 107 -5
30" 61 × 46 88 - 119 -5
40" 81 × 61 119 - 143 -7
50" 102 × 76 147 - 200 -8
150
Screen Size and Projection Distance
XGA (EB-X36)
4:3 screen size
A B
Minimum (Wide) to
4:3 screen size
A B
Maximum (Tele)
Minimum (Wide) to
50" 102 × 76 150 - 180 -8
Maximum (Tele)
60" 122 × 91 180 - 217 -10
30" 61 × 46 84 - 101 -5
80" 163 × 122 241 - 290 -14
40" 81 × 61 113 - 136 -6
100" 203 × 152 302 - 363 -17
50" 102 × 76 142 - 171 -8
150" 305 × 229 454 - 546 -25
60" 122 × 91 171 - 206 -10
200" 406 × 305 607 - 729 -34
80" 163 × 122 229 - 275 -13
250" 508 × 381 759 - 912 -42
100" 203 × 152 287 - 345 -16
300" 610 × 457 912 - 1095 -51
150" 305 × 229 432 - 519 -24
200" 406 × 305 577 - 693 -32
16:9 screen size
A B
250" 508 × 381 722 - 867 -40
Minimum (Wide) to
300" 610 × 457 867 - 1041 -48
Maximum (Tele)
28" 62 × 35 90 - 109 1
16:9 screen size
A B
30" 66 × 37 97 - 117 1
Minimum (Wide) to
40" 89 × 50 130 - 156 1
Maximum (Tele)
50" 111 × 62 163 - 196 1
28" 62 × 35 85 - 103 1
60" 133 × 75 196 - 236 1
30" 66 × 37 91 - 110 1
80" 177 × 100 263 - 316 2
40" 89 × 50 123 - 148 1
100" 221 × 125 329 - 396 2
50" 111 × 62 155 - 186 2
150" 332 × 187 495 - 595 3
60" 133 × 75 186 - 224 2
200" 443 × 249 661 - 794 5
80" 177 × 100 249 - 300 3
250" 553 × 311 827 - 994 6
100" 221 × 125 313 - 376 3
275" 609 × 342 910 - 1093 6
150" 332 × 187 471 - 566 5
200" 443 × 249 629 - 755 7
250" 553 × 311 787 - 945 9
275" 609 × 342 866 - 1040 10
151
Screen Size and Projection Distance
WXGA (EB-W32/EB-W31/EB-W04/EB-W130)
16:9 screen size
A B
Minimum (Wide) to
4:3 screen size
A B
Maximum (Tele)
Minimum (Wide) to
310" 686 × 386 903 - 1084 -17
Maximum (Tele)
29" 59 × 44 90 - 109 -4
16:10 screen size
A B
30" 61 × 46 94 - 113 -4
Minimum (Wide) to
40" 81 × 61 126 - 152 -5
Maximum (Tele)
50" 102 × 76 158 - 190 -7
33" 71 × 44 91 - 110 -4
60" 122 × 91 190 - 229 -8
35" 75 × 47 97 - 117 -4
70" 142 × 107 222 - 267 -10
40" 86 × 54 111 - 134 -5
80" 163 × 122 255 - 306 -11
50" 108 × 67 139 - 168 -6
100" 203 × 152 319 - 383 -14
60" 129 × 81 168 - 202 -7
150" 305 × 229 480 - 577 -20
80" 172 × 108 225 - 270 -10
200" 406 × 305 641 - 770 -27
100" 215 × 135 281 - 338 -12
280" 569 × 427 898 - 1079 -38
150" 323 × 202 424 - 509 -18
200" 431 × 269 566 - 680 -24
16:9 screen size
A B
320" 689 × 431 907 - 1089 -39
Minimum (Wide) to
Maximum (Tele)
WUXGA (EB-U32/EB-U04/EB-U130)
32" 71 × 40 91 - 109 -2
35" 77 × 44 99 - 120 -2
4:3 screen size
A B
40" 89 × 50 114 - 137 -2
Minimum (Wide) to
Maximum (Tele)
50" 111 × 62 143 - 172 -3
27" 55 × 41 89 - 109 -4
60" 133 × 75 172 - 208 -3
30" 61 × 46 99 - 121 -4
70" 155 × 87 202 - 243 -4
40" 81 × 61 133 - 163 -6
80" 177 × 100 231 - 278 -4
50" 102 × 76 168 - 205 -7
100" 221 × 125 289 - 348 -5
60" 122 × 91 202 - 246 -8
150" 332 × 187 435 - 523 -8
70" 142 × 107 236 - 288 -10
200" 443 × 249 582 - 699 -11
152
Screen Size and Projection Distance
4:3 screen size
A B
16:10 screen size
A B
Minimum (Wide) to Minimum (Wide) to
Maximum (Tele) Maximum (Tele)
80" 163 × 122 270 - 329 -11 40" 86 × 54 118 - 144 -5
100" 203 × 152 339 - 412 -14 50" 108 × 67 148 - 180 -6
150" 305 × 229 509 - 620 -21 60" 129 × 81 178 - 217 -7
200" 406 × 305 680 - 828 -28 80" 172 × 108 238 - 291 -10
260" 528 × 396 885 - 1078 -36 100" 215 × 135 299 - 364 -12
150" 323 × 202 450 - 548 -18
200" 431 × 269 601 - 731 -24
16:9 screen size
A B
300" 646 × 404 902 - 1098 -37
Minimum (Wide) to
Maximum (Tele)
30" 66 × 37 90 - 110 -2
35" 77 × 44 105 - 129 -2
40" 89 × 50 121 - 148 -2
50" 111 × 62 152 - 185 -3
60" 133 × 75 183 - 223 -3
70" 155 × 87 214 - 261 -4
80" 177 × 100 245 - 299 -5
100" 221 × 125 307 - 374 -6
150" 332 × 187 462 - 563 -8
200" 443 × 249 617 - 752 -11
290" 642 × 361 897 - 1091 -16
16:10 screen size
A B
Minimum (Wide) to
Maximum (Tele)
30" 65 × 40 87 - 107 -4
35" 75 × 47 102 - 125 -4
153
Supported Monitor Display Resolutions
The table here lists the compatible refresh rate and resolution for each
Signal Refresh rate (Hz) Resolution (dots)
compatible video display format.
VGA 60/72/75/85 640 × 480
SVGA 60/72/75/85 800 × 600Component Signals (Analog RGB)
XGA 60/70/75/85 1024 × 768
For EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EB-W04/EB-
X04/EB-U130/EB-W130/EB-X130/EB-X350/EB-X300
WXGA 60 1280 × 768
60 1366 × 768
Signal Refresh rate (Hz) Resolution (dots)
60/75 1280 × 800
VGA 60/72/75/85 640 × 480
WXGA+ 60 1440 × 900
SVGA 60/72/75/85 800 × 600
SXGA 70/75 1152 × 864
XGA 60/70/75/85 1024 × 768
60 1280 × 960
WXGA 60 1280 × 768
60 1280 × 1024
60 1366 × 768
SXGA+ 60 1400 × 1050
60/75/85 1280 × 800
WXGA+ 60/75/85 1440 × 900
Even when signals other than those mentioned above are input, it is likely that
WXGA++ 60 1600 × 900
the image can be projected. However, not all functions may be supported.
SXGA 70/75/85 1152 × 864
Component Video
60/75/85 1280 × 960
60/75/85 1280 × 1024
Signal Refresh rate (Hz) Resolution (dots)
SXGA+ 60/75 1400 × 1050
SDTV (480i/480p) 60 720 × 480
WSXGA+ * 60 1680 × 1050
SDTV (576i/576p) 50 720 × 576
UXGA 60 1600 × 1200
HDTV (720p) 50/60 1280 × 720
WUXGA ** 60 1920 × 1200
HDTV (1080i) 50/60 1920 × 1080
* WSXGA+ is available only for EB-U32/EB-W32/EB-W31/EB-U04/EB-
Composite Video
W04/EB-U130/EB-W130 and compatible only when Wide is selected as the
Resolution setting in the projector's Signal menu.
Signal Refresh rate (Hz) Resolution (dots)
** WUXGA is available only for EB-U32/EB-U04/EB-U130.
TV (NTSC) 60 720 × 480
For EB-S31/EB-S04/EB-S130/EB-S300
TV (SECAM) 50 720 × 576
TV (PAL) 50/60 720 × 576
154
Supported Monitor Display Resolutions
*** Available only for EB-U32/EB-U04/EB-U130.
HDMI Input Signal MHL Input Signal (EB-U32/EB-W32/EB-W31/EB-U04/EB-U130)
Signal Refresh rate (Hz) Resolution (dots) Signal Refresh rate (Hz) Resolution (dots)
VGA 60 640 × 480 VGA 60 640 × 480
SVGA 60 800 × 600 SDTV (480i/480p) 60 720 × 480
XGA 60 1024 × 768 SDTV (576i/576p) 50 720 × 576
WXGA 60 1280 × 800 HDTV (720p) 50/60 1280 × 720
60 1366 × 768 HDTV (1080i) 50/60 1920 × 1080
WXGA+ 60 1440 × 900 HDTV (1080p) 24/30 1920 × 1080
WXGA++ * 60 1600 × 900
UXGA * 60 1600 × 1200
WSXGA+ ** 60 1680 × 1050
WUXGA *** 60 1920 × 1200
SXGA 60 1280 × 960
60 1280 × 1024
SXGA+ 60 1400 × 1050
SDTV (480i/480p) 60 720 × 480
SDTV (576i/576p) 50 720 × 576
HDTV (720p) 50/60 1280 × 720
HDTV (1080i) 50/60 1920 × 1080
HDTV (1080p) 24/30/50/60 1920 × 1080
* Available only for EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EB-
W04/EB-X04/EB-U130/EB-W130/EB-X130/EB-X350/EB-X300.
** Available only for EB-U32/EB-W32/EB-W31/EB-U04/EB-W04/EB-
U130/EB-W130.
155
Projector Specifications
Product name EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-S31/EB- Zoom adjustment EB-S31/EB-S04/EB-S130/EB-S300:
U04/EB-W04/EB-X04/EB-S04/EB-U130/EB-W130/EB-
1.0 - 1.35 (Digital Zoom)
X130/EB-S130/EB-X350/EB-X300/EB-S300
EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-
Dimensions EB-W32/EB-W31/EB-X36/EB-X31/EB-S31/EB- U04/EB-W04/EB-X04/EB-U130/EB-W130/EB-
W04/EB-X04/EB-S04/EB-W130/EB-X130/EB- X130/EB-X350/EB-X300:
S130/EB-X350/EB-X300/EB-S300:
1 - 1.2
297 (W) × 77 (H) × 234 (D) mm (not including raised
Lamp UHE lamp, 200 W Model No.: ELPLP88
section)
Lamp life
EB-U32/EB-U04/EB-U130:
Normal Power Consumption mode: Up to 5000 hours
297 (W) × 77 (H) × 244 (D) mm (not including raised
ECO Power Consumption mode: Up to 10000 hours
section)
Max. audio output EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EB-
LCD panel size EB-X31/EB-S31/EB-X04/EB-S04/EB-X130/EB-
S130/EB-X300/EB-S300:
S130/EB-X350/EB-X300/EB-S300:
1W
0.55"
EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-
EB-X36:
S31/EB-U04/EB-U130/EB-X350:
0.63"
2W
EB-W32/EB-W31/EB-W04/EB-W130:
Speaker 1
0.59"
Power supply 100-240V AC±10% 50/60Hz 2.9 - 1.3 A
EB-U32/EB-U04/EB-U130:
Power 100 to 120 V Operating: 291 W
0.67"
consumpt area
Standby power consumption (Communication On): 2.3
Display method Poly-silicon TFT active matrix
ion
W
Resolution EB-S31/EB-S04/EB-S130/EB-S300:
Standby power consumption (Communication Off): 0.2
W
480,000 pixels
SVGA (800 (W) × 600 (H) dots) × 3
220 to 240 V Operating: 277 W
area
EB-X36/EB-X31/EB-X04/EB-X130/EB-X350/EB-
Standby power consumption (Communication On): 2.4
X300:
W
786,432 pixels
Standby power consumption (Communication Off):
0.26 W
XGA (1024 (W) × 768 (H) dots) × 3
EB-W32/EB-W31/EB-W04/EB-W130:
Operating altitude Altitude 0 to 3,000 m
1024,000 pixels
Operating temperature +5 to +35°C (No condensation) (Altitude 0 to 2,286 m)
WXGA (1280 (W) × 800 (H) dots) × 3
+5 to +30°C (No condensation) (Altitude 2,287 to 3,000
EB-U32/EB-U04/EB-U130:
m)
2,304,000 pixels
Storage temperature -10 to +60°C (No condensation)
WUXGA (1920 (W) × 1200 (H) dots) × 3
Focus adjustment Manual
156
Projector Specifications
Mass EB-W32/EB-W31/EB-X36/EB-X31/EB-S31/EB- HDMI port 1 HDMI (Audio is only supported by
W04/EB-X04/EB-S04/EB-W130/EB-X130/EB- PCM)
(EB-X36/EB-X31/EB-
S130/EB-X350/EB-X300/EB-S300:
S31/EB-W04/EB-X04/EB-
Approx. 2.4 kg S04/EB-W130/EB-
X130/EB-S130/EB-
EB-U32/EB-U04/EB-U130:
X350/EB-X300/EB-S30)
Approx. 2.6 kg
HDMI/MHL port
(EB-W32/EB-W31)
This product is also designed for IT power distribution system with phase-to-
HDMI1, HDMI2/MHL
phase voltage 230V.
port
(EB-U32/EB-U04/EB-
Angle of tilt
U130)
USB-A port 1 USB connector (Type A)
USB-B port 1 USB connector (Type B)
USB-A and USB-B port supports USB 2.0. However, USB ports are
not guaranteed to operate all devices that support USB.
a
If you use the projector tilted at an angle of more than 30˚ it could be
USB-B port is not support USB 1.1.
damaged and cause an accident.
gg Related Links
• "Connector Specifications" p.156
Connector Specifications
Computer port 1 Mini D-Sub15-pin (female)
Video port 1 RCA pin jack
S-Video port 1 Mini DIN 4-pin
(EB-W32/EB-W31/EB-
X36/EB-X31/EB-S31/EB-
W04/EB-X04/EB-S04/EB-
W130/EB-X130/EB-
S130/EB-X350/EB-
X300/EB-S30)
Audio port 1 RCA pin jack x 2 (L-R)
157
External Dimensions
EB-U32/EB-U04/EB-U130
A
Center of lens
B
Distance from center of lens to suspension bracket fixing point
158
External Dimensions
The unit in these illustrations is mm.
EB-W32/EB-W31/EB-X36/EB-X31/EB-S31/EB-W04/EB-X04/EB-S04/EB-
W130/EB-X130/EB-S130/EB-X350/EB-X300/EB-S300
159
USB Display System Requirements
To use the projector's Epson USB Display software, your computer must meet
Requirement Windows Mac
the following system requirements.
Windows 8.1
Windows 8.1 (32- and 64-bit)
Requirement Windows Mac
Windows 8.1 Pro (32- and 64-
Operating system Windows 2000 (Service Pack 4 OS X
bit)
only)
Mac OS X 10.5.x (32-bit)
Windows 8.1 Enterprise (32-
Windows XP
Mac OS X 10.6.x (32- and
and 64-bit)
64-bit)
Professional (32-bit)
CPU Mobile Pentium III 1.2 GHz or Power PC G4 1 GHz or faster
OS X 10.7.x (32- and 64-
Home Edition (32-bit)
faster
(Core Duo 1.83 GHz or faster
bit)
Tablet PC Edition (32-bit)
(Pentium M 1.6 GHz or faster recommended)
OS X 10.8.x (64-bit)
recommended)
Windows Vista
OS X 10.9.x (64-bit)
Memory 256 MB or more 512 MB or more
Ultimate (32-bit)
OS X 10.10.x (64-bit)
(512 MB or more recommended)
Enterprise (32-bit)
Hard disk space 20 MB or more 20 MB or more
Business (32-bit)
Home Premium (32-bit)
Display Resolution between 640 × 480 Resolution between 640 × 480
and 1920 × 1200 and 1920 × 1200
Home Basic (32-bit)
16-bit color or greater 16-bit color or greater
Windows 7
Ultimate (32- and 64-bit)
Enterprise (32- and 64-bit)
Professional (32- and 64-bit)
Home Premium (32- and 64-
bit)
Home Basic (32-bit)
Starter (32-bit)
Windows 8
Windows 8 (32- and 64-bit)
Windows 8 Pro (32- and 64-
bit)
Windows 8 Enterprise (32-
and 64-bit)
160
List of Safety Symbols (corresponding to IEC60950-1 A2)
The following table lists the meaning of the safety symbols labeled on the
No. Symbol mark Approved Description
equipment.
standards
I
The same as No.8.
No. Symbol mark Approved Description
standards
J
IEC60417 Battery, general
A
IEC60417 "ON" (power)
No.5001B On battery powered equipment. To
No.5007 To indicate connection to the mains.
identify a device for instance a cover
for the battery compartment, or the
connector terminals.
B
IEC60417 "OFF" (power)
K
IEC60417 Positioning of cell
No.5008 To indicate disconnection from the
No.5002 To identify the battery holder itself
mains.
and to identify the positioning of the
cell(s) inside the battery holder.
C
IEC60417 Stand-by
L
The same as No.11.
No.5009 To identify the switch or switch
position by means of which part of the
equipment is switched on in order to
M
IEC60417 Protective earth
bring it into the stand-by condition.
No.5019 To identify any terminal which is
D
ISO7000 Caution
intended for connection to an external
No.0434B, To identify general caution when
conductor for protection against
using the product.
IEC3864-B3.1
electric shock in case of a fault, or the
terminal of a protective earth
E
IEC60417 Caution, hot surface
electrode.
No.5041 To indicate that the marked item can
N
IEC60417 Earth
be hot and should not be touched
No.5017 To identify an earth (ground) terminal
without taking care.
in cases where neither the symbol
F
IEC60417 Caution, risk of electric shock
No.13 is explicitly required.
No.6042 To identify equipment that has risk of
O
IEC60417 Alternating current
electric shock.
ISO3864-B3.6
No.5032 To indicate on the rating plate that the
equipment is suitable for alternating
G
IEC60417 For indoor use only
current only; to identify relevant
No.5957 To identify electrical equipment
terminals.
designed primarily for indoor use.
P
IEC60417 Direct current
H
IEC60417 Polarity of d.c. power connector
No.5031 To indicate on the rating plate that the
equipment is suitable for direct
No.5926 To identify the positive and negative
current only; to identify relevant
connections (the polarity) on a piece
terminals.
of equipment to which a d.c. power
supply may be connected.
161
List of Safety Symbols (corresponding to IEC60950-1 A2)
No. Symbol mark Approved Description
standards
Q
IEC60417 Class II equipment
No.5172 To identify equipment meeting the
safety requirements specified for Class
II equipment according to IEC 61140.
R
ISO 3864 General prohibition
To identify actions or operations that
are prohibited.
S
ISO 3864 Contact prohibition
To indicate injury that could occur
due to touching a specific part of the
equipment.
T
Never look into the optical lens while
the projector is on.
U
To indicate that the marked item don’t
place anything on projector.
V
ISO3864 Caution, laser radiation
IEC60825-1 To indicate the equipment has a laser
radiation part.
W
ISO 3864 Disassembly prohibition
To indicate a risk of injury, such as
electric shock, if the equipment is
disassembled.
162
Glossary
This section briefly explains the difficult terms that are not explained in the
HDCP HDCP is an abbreviation for High-bandwidth Digital Content
text of this guide. For details, refer to other commercially available
Protection.
publications.
It is used to prevent illegal copying and protect copyrights by
encrypting digital signals sent over DVI and HDMI ports.
AMX Device AMX Device Discovery is a technology developed by AMX to
Because the HDMI port on this projector supports HDCP, it
Discovery facilitate AMX control systems for easy operation of the target
can project digital images protected by HDCP technology.
equipment.
However, the projector may not be able to project images
Epson have implemented this protocol technology, and have
protected with updated or revised versions of HDCP
provided a setting to enable the protocol function (ON).
encryption.
See the AMX Web site for more details.
HDTV An abbreviation for High-Definition Television that refers to
URL http://www.amx.com/
high-definition systems which satisfy the following conditions:
Aspect Ratio The ratio between an image's length and its height.
Vertical resolution of 720p or 1080i or greater (p =
Progressive, i = Interlace)
Screens with a horizontal:vertical ratio of 16:9, such as HDTV
screens, are known as wide screens.
Screen aspect ratio of 16:9
SDTV and general computer displays have an aspect ratio of
Infrastructure A method for wireless LAN connection in which devices
4:3.
mode communicate through access points.
Component Video A method that separates the video signal into a luminance
Interlace Transmits information needed to create one screen by sending
component (Y), and a blue minus luminance (Cb or Pb) and a
every other line, starting from the top of the image and working
red minus luminance (Cr or Pr).
down to the bottom.
Composite Video A method that combines the video signal into a luminance
Images are more likely to flicker because one frame is displayed
component and a color component for transmission down a
every other line.
single cable.
IP Address A number to identify a computer connected to a network.
Contrast The relative brightness of the light and dark areas of an image
MHL An abbreviation for Mobile High-definition Link, a standard
can be increased or decreased to make text and graphics stand
for connection interfaces aimed at mobile devices such as
out more clearly, or to make them appear softer. Adjusting this
smartphones and tablets.
particular property of an image is called contrast adjustment.
Images can be transferred at high quality and at high speeds
DHCP An abbreviation of Dynamic Host Configuration Protocol, this
without compressing the digital signal, and also charges
protocol automatically assigns an IP address to equipment
connected devices.
connected to a network.
Progressive Projects information to create one screen at a time, displaying
Gateway Address This is a server (router) for communicating across a network
the image for one frame.
(subnet) divided according to subnet mask.
Even though the number of scan lines is the same, the amount
of flicker in images decreases because the volume of
information has doubled compared with an interlace system.
163
Glossary
Refresh Rate The light-emitting element of a display maintains the same Tracking The signals output from computers have a specific frequency.
luminosity and color for an extremely short time.
If the projector frequency does not match this frequency, the
Because of this, the image must be scanned many times per resulting images are not of a good quality.
second to refresh the light-emitting element.
The process of matching the frequency of these signals (the
The number of refresh operations per second is called the number of crests in the signal) is called Tracking.
Refresh rate and is expressed in hertz (Hz).
If Tracking is not carried out correctly, wide vertical stripes
appear in the signal.
SDTV An abbreviation for Standard Definition Television that refers
to standard television systems which do not satisfy the
Trap IP Address This is the IP address for the destination computer used for
conditions for HDTV High-Definition Television.
error notification in SNMP.
SNMP An abbreviation for Simple Network Management Protocol,
VGA A screen size standard with a resolution of 640 (horizontal) ×
which is the protocol for monitoring and controlling devices
480 (vertical) dots.
such as routers and computers connected to a TCP/IP network.
XGA A screen size standard with a resolution of 1,024 (horizontal) ×
sRGB An international standard for color intervals that was
768 (vertical) dots.
formulated so that colors that are reproduced by video
WXGA A screen size standard with a resolution of 1,280 (horizontal) ×
equipment can be handled easily by computer operating
768 (vertical) dots.
systems (OS) and the Internet. If the connected source has an
sRGB mode, set both the projector and the connected signal
WUXGA A screen size standard with a resolution of 1,920 (horizontal) ×
source to sRGB.
1,200 (vertical) dots.
SSID SSID is identification data for connecting to another device on
a wireless LAN. Wireless communication is possible between
devices with the same SSID.
Subnet Mask This is a numerical value that defines the number of bits used
for the network address on a divided network (subnet) from the
IP address.
SVGA A screen size standard with a resolution of 800 (horizontal) ×
600 (vertical) dots.
SXGA A screen size standard with a resolution of 1,280 (horizontal) ×
1,024 (vertical) dots.
Sync. The signals output from computers have a specific frequency.
If the projector frequency does not match this frequency, the
resulting images are not of a good quality.
The process of matching the phases of these signals (the relative
position of the crests and the troughs in the signal) is called
Synchronization.
If the signals are not synchronized, flickering, blurriness, and
horizontal interference occur.
164
Notices
Type of Product: LCD Projector
Check these sections for important notices about your projector. Model:
H716C/H717C/H718C/H719C/H720C/H721C/H722C/H723C/H730C/H763
gg Related Links
C/H764C
• "FCC Compliance Statement" p.164
• "Indication of the manufacturer and the importer in accordance with
FCC Compliance Statement For United States Users
requirements of EU directive" p.165
This equipment has been tested and found to comply with the limits for a
• "Restriction of Use" p.165
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
• "Operating System References" p.165
designed to provide reasonable protection against harmful interference in a
• "Trademarks" p.165
residential installation. This equipment generates, uses, and can radiate radio
• "Copyright Notice" p.166
frequency energy and, if not installed and used in accordance with the
• "Copyright Attribution" p.166
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio and television
FCC Compliance Statement
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures.
DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
• Reorient or relocate the receiving antenna.
Class B Personal Computers and Peripherals; and/or
• Increase the separation between the equipment and receiver.
CPU Boards and Power Supplies used with Class B Personal Computers
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
We: Epson America, Inc.
• Consult the dealer or an experienced radio/TV technician for help.
Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806
WARNING
Tel: 562-981-3840
The connection of a non-shielded equipment interface cable to this
Declare under sole responsibility that the product identified herein, complies
equipment will invalidate the FCC Certification or Declaration of this device
with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each
and may cause interference levels which exceed the limits established by the
product marketed, is identical to the representative unit tested and found to
FCC for this equipment. It is the responsibility of the user to obtain and use a
be compliant with the standards. Records maintained continue to reflect the
shielded equipment interface cable with this device. If this equipment has
equipment being produced can be expected to be within the variation
more than one interface connector, do not leave cables connected to unused
accepted, due to quantity production and testing on a statistical basis as
interfaces. Changes or modifications not expressly approved by the
required by 47CFR 2.909. Operation is subject to the following two
manufacturer could void the user's authority to operate the equipment.
conditions : (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Trade Name: EPSON
165
Notices
• Microsoft
®
Windows Vista
®
operating system
• Microsoft
®
Windows
®
7 operating system
Indication of the manufacturer and the importer in
• Microsoft
®
Windows
®
8 operating system
accordance with requirements of EU directive
• Microsoft
®
Windows
®
8.1 operating system
In this guide, the operating systems above are referred to as "Windows 2000",
Manufacturer: SEIKO EPSON CORPORATION
"Windows XP", "Windows Vista", "Windows 7", "Windows 8", and
Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
"Windows 8.1". Furthermore, the collective term Windows may be used to
Telephone: 81-266-52-3131
refer to Windows 2000, Windows XP, Windows Vista, Windows 7,
http://www.epson.com/
Windows 8, and Windows 8.1.
• Mac OS X 10.3.x
Importer: EPSON EUROPE B.V.
• Mac OS X 10.4.x
Address: Atlas Arena, Asia Building, Hoogoorddreef 5,1101 BA Amsterdam
• Mac OS X 10.5.x
Zuidoost
• Mac OS X 10.6.x
The Netherlands
• OS X 10.7.x
Telephone: 31-20-314-5000
http://www.epson.com/europe.html
• OS X 10.8.x
• OS X 10.9.x
• OS X 10.10.x
Restriction of Use
In this guide, the operating systems above are referred to as "Mac OS X
10.3.x", "Mac OS X 10.4.x", "Mac OS X 10.5.x", "Mac OS X 10.6.x", "OS X
When this product is used for applications requiring high reliability/safety
10.7.x", "OS X 10.8.x", "OS X 10.9.x", and "OS X 10.10.x". Furthermore, the
such as transportation devices related to aviation, rail, marine, automotive
collective term "OS X" is used to refer to them all.
etc.; disaster prevention devices; various safety devices etc; or
functional/precision devices etc, you should use this product only after giving
consideration to including fail-safes and redundancies into your design to
Trademarks
maintain safety and total system reliability. Because this product was not
intended for use in applications requiring extremely high reliability/safety
EPSON is a registered trademark, EXCEED YOUR VISION, ELPLP and their
such as aerospace equipment, main communication equipment, nuclear
logos are registered trademarks or trademarks of Seiko Epson Corporation.
power control equipment, or medical equipment related to direct medical care
etc, please make your own judgment on this product’s suitability after a full
Mac, Mac OS, and OS X, are trademarks of Apple Inc.
evaluation.
Microsoft, Windows, Windows Vista, PowerPoint, and the Windows logo are
trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries.
Operating System References
WPA
and WPA2
are registered trademarks of Wi-Fi Alliance.
• Microsoft
®
Windows
®
2000 operating system
App Store is a service mark of Apple Inc.
• Microsoft
®
Windows
®
XP operating system
Google play is a trademark of Google Inc.
166
Notices
This information is subject to change without notice.
HDMI and High-Definition Multimedia Interface are the trademarks or ©SEIKO EPSON CORPORATION 2015. All rights reserved.
registered trademarks of HDMI Licensing LLC.
2015.4 412878300/412879000EN
MHL, the MHL logo, and Mobile High-Definition Link are the trademarks or
registered trademarks of MHL and LLC in the United States and/or other
countries.
"QR Code" is a registered trademark of DENSO WAVE INCORPORATED.
Other product names used herein are also for identification purposes only
and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
Copyright Notice
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior written
permission of Seiko Epson Corporation. No patent liability is assumed with
respect to the use of the information contained herein. Neither is any liability
assumed for damages resulting from the use of the information contained
herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the
purchaser of this product or third parties for damages, losses, costs, or
expenses incurred by the purchaser or third parties as a result of: accident,
misuse, or abuse of this product or unauthorized modifications, repairs, or
alterations to this product, or (excluding the U.S.) failure to strictly comply
with Seiko Epson Corporation's operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems
arising from the use of any options or any consumable products other than
those designated as Original Epson Products or Epson Approved Products by
Seiko Epson Corporation.
The contents of this guide may be changed or updated without further notice.
Illustrations in this guide and the actual projector may differ.
Copyright Attribution
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-U04 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-U04 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-U04

Epson EB-U04 User Manual - German - 169 pages

Epson EB-U04 User Manual - Dutch - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info