617832
141
Zoom out
Zoom in
Previous page
1/166
Next page
141
Solving Image or Sound Problems
• "Supported Monitor Display Resolutions" p.153
Solutions When the Image Contains Noise or Static Solutions When the Image is Fuzzy or Blurry
If the projected image contains electronic interference (noise) or static, try the If the projected image is fuzzy or blurry, try the following solutions:
following solutions:
• Adjust the image focus.
• Check the cables connecting your computer or video source to the
• Clean the projector lens.
projector. They should be:
• Separated from the power cord to prevent interference
To avoid condensation on the lens after bringing the projector in
from a cold environment, let the projector warm up to room
• Securely connected at both ends
a
temperature before using it.
• Not connected to an extension cable
• No longer than 3 meters
• Position the projector close enough to the screen.
• Check the settings on the projector's Signal menu to make sure they match
• Position the projector so the keystone adjustment angle is not so wide that it
the video source.
distorts the image.
• If available for your video source, adjust the Deinteracing and Noise
• Turn on automatic adjustment in the projector's Settings menu.
Reduction settings in the Image menu.
s Settings > Keystone > H/V-Keystone > Auto V-Keystone
• Select a computer video resolution and refresh rate that are compatible with
• Adjust the Sharpness setting in the projector's Image menu to improve
the projector.
image quality.
• If you are projecting from a computer, press the [Auto] button on the
• If you are projecting from a computer, press the [Auto] button on the
remote control to automatically adjust the Tracking and Sync. settings. If
remote control to automatically adjust the tracking and sync. If any bands
the images are not adjusted correctly, manually adjust the Tracking and
or overall blurriness remain, display a uniformly patterned image on the
Sync. settings in the projector's Signal menu.
screen and manually adjust the Tracking and Sync. settings in the
• Select Auto as the Resolution setting in the projector's Signal menu.
projector's Signal menu.
• If you adjusted the image shape using the projector controls, try decreasing
• If you are projecting from a computer, use a lower resolution or select a
the Sharpness setting in the projector's Image menu to improve image
resolution that matches the projector's native resolution.
quality.
gg Related Links• If you connected an extension power cable, try projecting without it to see if
• "Input Signal Settings - Signal Menu" p.103
it caused interference in the signal.
• "Image Quality Settings - Image Menu" p.101
• If you are using the USB Display function, turn off the Transfer layered
• "Supported Monitor Display Resolutions" p.153
window setting in the Epson USB Display Settings program on your
• "Focusing the Image Using the Focus Ring" p.48
computer.
• "Cleaning the Lens" p.123
gg Related Links
• "Input Signal Settings - Signal Menu" p.103
• "Image Quality Settings - Image Menu" p.101
141


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-S300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-S300 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-S300

Epson EB-S300 User Manual - German - 169 pages

Epson EB-S300 User Manual - Dutch - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info