617832
96
Zoom out
Zoom in
Previous page
1/166
Next page
96
Using ESC/VP21 Commands
• Default baud rate setting: 9600 bps
You can monitor and control the projector from a computer via USB. If the command being processed terminates abnormally, an error message is
Connect the computer and the projector with a USB cable, and enter the output and a ":" is returned.
communication commands (ESC/VP21 commands).
The following commands are available.
gg Related Links
Item Command
• "Setting Up for Using ESC/VP21 Commands" p.96
• "ESC/VP21 Command List" p.96
Power On/Off On PWR ON
• "Communications Protocol" p.96
Off PWR OFF
Signal selection Computer Auto SOURCE 1F
Setting Up for Using ESC/VP21 Commands
RGB SOURCE 11
Component SOURCE 14
The first time you control and monitor the projector using ESC/VP21
commands, you must install the USB communication driver on your
HDMI, HDMI1 SOURCE 30
computer and set up the projector. You do not need to install the driver the
HDMI2 * SOURCE A0
next time.
Video SOURCE 41
a
Install the USB communication driver (EPSON USB-COM Driver) on
S-Video ** SOURCE 42
your computer. For information about the EPSON USB-COM Driver,
USB Display SOURCE 51
contact Epson.
USB SOURCE 52
b
Set the USB Type B setting to Link 21L in the projector's Extended
LAN SOURCE 53
menu.
A/V Mute On/Off On MUTE ON
Off MUTE OFF
c
Connect your computer to the projector's USB-B port using a USB
cable.
* HDMI2 is available only with the EB-U32/EB-U04/EB-U130.
You can start from step 2 the next time you use the commands.
** S-Video is available only with the EB-W32/EB-W31/EB-X36/EB-X31/EB-
S31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EB-S130/EB-X350/EB-
X300/EB-S300.
ESC/VP21 Command List
Add a Carriage Return (CR) code (0Dh) to the end of each command and
When the power ON command is transmitted to the projector, the power
transmit.
turns on and it enters warm-up mode. When the projector's power has turned
Contact Epson for more details.
on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and returns a
Communications Protocol
":", and then accepts the next command.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-S300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-S300 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-S300

Epson EB-S300 User Manual - German - 169 pages

Epson EB-S300 User Manual - Dutch - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info