617825
119
Zoom out
Zoom in
Previous page
1/166
Next page
119
Copy Menu Settings to Another Projector (Batch Setup)
projector's indicators have turned off.
After selecting the projector's menu settings for one projector, you can save
b
Connect an empty USB flash drive directly to the projector's USB-A
the settings to a USB flash drive or a computer connected with a USB cable to port.
copy settings to another projector, as long as they are the same model.
c
Hold down the [Esc] button on the remote control or the control panel
Menu settings such as the following are not copied to the other projector.
and connect the power cord to the projector.
Network menu settings (except for the Mail menu and the Others menu)
Lamp Hours and Status from the Info menu
d
When all of the projector's indicators turn on, release the [Esc] button.
The indicators start flashing and the batch setup file is written to the
Perform batch setup before adjusting the image settings such as
USB flash drive. When writing is finished, the projector turns off.
Keystone. Since image adjustment values are also copied to another
a
projector, the adjustments you made before performing the batch setup
Caution
are overwritten and the projected screen you adjusted may change.
Do not disconnect the power cord or the USB flash drive from the projector
When copying the menu settings from one projector to another, user's
while the file is being written. If the power cord or USB flash drive is
logo is also copied. Do not register the information that you do not
disconnected, the projector may not start correctly.
want to share between multiple projector as a user's logo.
e
Remove the USB flash drive.
Caution
Epson takes no responsibility for batch setup failures and associated repair costs
The file name for the batch setup file is PJCONFDATA.bin. If
due to power outages, communication errors, or other problems that may cause
you need to change the file name, add text after PJCONFDATA
a
such failures.
using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not be
gg Related Links
able to recognize the file correctly.
• "Performing Batch Setup Using a USB Flash Drive" p.119
• "Performing Batch Setup Using a USB Cable" p.120
f
Disconnect the power cord from the projector to which you want to
copy settings, and check that all of the projector's indicators have
Performing Batch Setup Using a USB Flash Drive
turned off.
You can copy menu settings from one projector to another of the same model
g
Connect the USB flash drive containing the saved batch setup file to the
using a USB flash drive.
projector's USB-A port.
The USB flash drive must use a FAT format and not incorporate any
h
Hold down the [Menu] button on the remote control or the control
security function. Delete any files on the drive before using it for batch
a
panel and connect the power cord to the projector.
setup or the settings may not be saved correctly.
i
When all of the projector's indicators turn on, release the [Menu]
button. (The indicators remain on for approximately 75 seconds.)
a
Disconnect the power cord from the projector, and check that all of the
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-S04 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-S04 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-S04

Epson EB-S04 User Manual - German - 169 pages

Epson EB-S04 User Manual - Dutch - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info