Do the input signal settings match the signals from the connected
device?
Change the setting according to the signal for the connected equipment.
sSignal - Advanced - Input Signalp.129
Is the image brightness adjusted correctly?Adjust the Brightness setting from the Configuration menu.
sImage - Brightnessp.127
Are the cables connected correctly?Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s "Connecting Equipment" p.45
Is the
Contrast
g
adjusted correctly?Adjust the Contrast setting from the Configuration menu.
sImage - Contrastp.127
Is the color adjustment set correctly?Adjust the Gamma or RGBCMY setting from the Configuration menu.
sImage - Advancedp.127
s "Adjusting the Image" p.80
Are the color saturation and tint adjusted correctly?Adjust the Color Saturation and Tint settings from the Configuration menu.
sImage - Color Saturation, Tintp.127
Is the brightness of the room appropriate?If the room is darker than when the auto adjustment was performed, the tint of the projected images may not be displayed
correctly. Make the room darker and then perform auto adjustment again.
s "Screen Matching" p.99
s "Color Calibration" p.188
Images appear dark
CheckRemedy
Is the image brightness set correctly?Check the Brightness and Brightness Settings values from the Configuration menu.
sImage - Brightnessp.127
s
Settings - Brightness Settingsp.131
Is the
Contrast
g
adjusted correctly?Adjust the Contrast setting from the Configuration menu.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Epson EB-L1300U at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Epson EB-L1300U in the language / languages: English as an attachment in your email.
The manual is 30 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.