675205
90
Zoom out
Zoom in
Previous page
1/254
Next page
You can setup multiple projectors to project one large and wide image.
You can adjust the difference of brightness and color tone between each
projected image to create a seamless screen.
a
Set 4K Enhancement to Off.
We recommend setting the focus, zoom, and lens shift at least
20 minutes after you start the projection, because images are not
stable right after turning on the projector.
If the values for Geometry Correction are large, the image position
adjustment for overlapping images becomes difficult.
The Test Pattern can be displayed to adjust the projection status
without connecting video equipment.
s "Displaying a Test Pattern" p.31
If you project a dot by dot image that can be projected without
being enlarged or reduced, you can make adjustments precisely.
Adjustment Procedure
Adjusting automatically online
Images from multiple projectors can be automatically adjusted to match the
image from the projector set as the master projector (Screen Matching).
Before selecting the master projector, set Light Source Mode to Custom for
all projectors, and set Brightness Level to the maximum. Set the projector
with the darkest projected image as the master projector.
s Settings - Brightness Settings - Light Source Mode - Brightness Level
p.131
Advance preparation
(1) Connect all projectors to a network hub using LAN cables.
(2) Turning on the master projector.
(3) Set an ID for the master projector and the remote control.
s "Set the projector ID" p.40
(4) Turn on all projectors.
(5) Set the DHCP to On for all projectors, or check that IP addresses have been
assigned.
s
Network - Network Configuration - Wired LAN - IP Settings
p.142
(6) Make sure that Sleep Mode is set to Off so that it does not turn off while
adjusting.
Adjusting the projected position
(1) Adjust the position (angle) of the projector.
s "Installation Settings" p.29
(2) Adjust the arrangement of the images.
s "Performing tiling automatically" p.91
Adjusting the projected images
(1) Adjust the aspect ratio of the images.
s "Screen Settings" p.30
s
"Changing the Aspect Ratio of the Projected Image " p.78
(2) Adjust the lens shift.
s "Adjusting the Position of the Projected Image (Lens Shift)" p.33
(3) Adjust the zoom and focus.
s "Adjusting the Image Size" p.35
s
"Correcting the Focus" p.36
(4) Adjust small differences in the images.
s "Point Correction" p.72
(5) Adjust the edges of the images.
s "Edge Blending" p.93
s
"Black Level" p.95
(6) Adjust the brightness and tint of the images.
s "Screen Matching" p.99
Multi-Projection Function
90
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-L1300U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-L1300U in the language / languages: English as an attachment in your email.

The manual is 30 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-L1300U

Epson EB-L1300U User Manual - German - 270 pages

Epson EB-L1300U User Manual - Dutch - 265 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info