Is the lamp due for replacement?When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When
this happens, replace the lamp with a new lamp. sp.104
Problems when projection starts
No power supplied
CheckRemedy
Did you press the [t] button?Press the [t] button to turn the power on.
Are the indicators switched off?The power cable is not connected correctly or power is not being supplied normally.
Disconnect and then reconnect the power cable. sQuick Start Guide
Check that your electrical outlet or power source is functioning correctly.
Do the indicators turn on and off when the power cable is touched?There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the powercable. If this
does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact
your local dealer or the nearest address provided in the Support and Service Guide.
s
Epson Projector Contact List
Is the Control Panel Lock set to Full Lock?Press the [t] button on the remote control. If you do not want to use Control Panel Lock, change the setting to Off.
sSettings Menu - Control Panel Lockp.59
Is the correct setting for the remote receiver selected?Check the Remote Receiver from the configuration menu. sSettings Menu - Remote Receiverp.59
Was the power cable plugged back in or was the breaker turned on
immediately after Direct Power Off?
When the operation to the left is performed when Direct Power On is set to On, the power may not turn back on. Press
the [t] button to turn the power back on.
Is the ID switch on the side of the remote control set to On?When the switch is set to On, you can use the remote control to operate only a projector with a matching ID. Set ID switch
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Epson EB-G5950 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Epson EB-G5950 in the language / languages: English as an attachment in your email.
The manual is 3,95 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
